What size air conditioner do I need for a 2400 square foot home?

A window or portable AC designed for a room would typically be described with BTUs, while a whole-home AC would be described by how many tons it is. If you have a 1,200-square-foot home, you'd need a two-ton unit. A 2,400-square-foot home would need a four-ton unit.

What size HVAC do I need for 2400 sq ft?

The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It's possible to fall between unit sizes, so if that's the case with you, then you should choose the next higher size. That way, you can be sure that the AC unit can still cool a given area sufficiently.

How many BTU do I need for a 2500 square foot house?

However, there are basic “rule-of-thumb” estimations to help select the proper size for your home. In colder climates, you'll want a furnace that generates 40 to 45 BTUs per square foot. At this amount, you'll need 100,000-112,500 BTU furnace to heat a home of 2,500 square feet.

How much does an air conditioner cost for a 2500 sq ft home?

Replacing a 3 to 5-ton AC unit costs $3,000 to $8,000 for a 1,500 to 2,500 square foot home.

How many square feet does a 3 ton AC unit cover?

How many square feet does a 3-ton air conditioner cover is quite easy to answer as well. 3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.

WHAT AIR CONDITIONER SIZE DO I NEED? How To Size Air Conditioner For Your House

What happens if your AC is too big?

If your air conditioner is too big, you'll have hot spots – or inconsistent cooling – throughout your home. Hot spots occur most often when cold air doesn't disperse through the home efficiently enough. You'll notice that some of your rooms are cool and comfortable, while others are hot and humid.

Why is an oversized AC bad?

Again, because oversized HVAC units blast your home with cool air instead of cooling it down gradually, the temperature swings prompt your HVAC system to start up and shut down in rapid succession-a condition commonly known as “short cycling.” Short cycling can wreak havoc on your HVAC system if left unchecked.

What size central air conditioner do I need for a 2000 sq ft home?

If your home is 2000 square feet, you can calculate your HVAC needs the same as you would for a 1600 square foot home. Assuming one ton of cooling capacity can cool 400 square feet of your home, you'll need about 5.0 tons of air conditioning capacity. Multiply this by 12,000 BTUs, and you'll get 60,000 BTUs.

How much is a 3.5 ton AC unit?

New AC unit cost recap

A 3-ton AC unit cost runs homeowner around $3,400 to $3,700. When it comes to a 3.5-ton AC unit cost, you will pay around $3,500 to $3,700. A 4-ton AC unit cost is $3,700 to $3,800 on average.

How many seers do I need for 2000 square feet?

MrCool 3-ton DIY mini split with 20 SEER rating is an affordable unit for 2,000 sq ft homes in colder climates and with good insulation.

How much is a 5 ton AC?

A 5.0 TON air conditioner would cost around $1,980 for the AC unit alone or a total installation cost of $3,690.

What does a 4 ton AC unit cost?

You can get a 4 ton AC installed for less than $6,000. That cost includes the outdoor condensing unit, indoor evaporator coil, refrigerant line set, refrigerant charge needed to fill up the system and other installation supplies.

How do I know if my AC unit is big enough for my house?

Rule of Thumb – The maximum size unit you should buy would be 15% over the BTUs you need for cooling and 40% of the BTUs for heating. The max for heat pumps is 25%, since it handles both cooling and heating.

Is a 4 ton AC unit too big?

While a local HVAC professional can help you with this, the general rule of thumb is that one ton of AC capacity will cool approximately 500 square feet. So if your home is 1,500 square feet, a two to three-ton unit would be best.

How do I know if my AC is too big?

How much area can a 3.5 ton AC unit cool?

Choose a unit that is 3.5 tons if your home measures more than 1,800 but not more than 2,100 square feet. A four-ton unit is suitable for homes that are more than 2,100 square feet up to 2,400 SF.

What is the difference between a 2.5 ton and 3 ton AC?

For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.

How many rooms can a 3 ton AC cool?

It can be used to cool a single room or an entire house. So, how many square feet a 3-ton air conditioner cools? Generally, a 3-ton air conditioner can comfortably cool a 1500 square feet room. For an entire house, a 3-ton air conditioner is usually sufficient for a 2000 sqft insulated house.

Why is HVAC installation so expensive?

Conclusion. When it comes down to it, the most expensive parts of any HVAC unit installation will be the machine and the labor. The device is so expensive because it is filled with complicated electrical gadgets that measure airflow and temperature.

How long do AC units last?

While every unit is different, and every homeowner has a different understanding of when their central air conditioner is broken beyond repair, it's fair to say that, with proper maintenance and care, you can expect a good 15 to 20 years of cooling from a new high efficiency air conditioning system.

How much more efficient is a 16 SEER vs 14 SEER?

A 16 SEER unit is about 13% more efficient than a 14 SEER. For every $100 you spend to cool your home with a 14 SEER, you could save $13 on your monthly bill by upgrading to the 16 SEER unit. But just like gas mileage, your ability to meet this maximum efficiency and savings depends on a lot of other factors.