What oil does a 2005 BMW 320i take?

Castrol - GTX 5W-30 High Mileage Synthetic Blend Motor Oil 5 Quart (Part No. 15980E)
Takedown request   |   View complete answer on shop.advanceautoparts.com


What oil should I put in my BMW 320i?

It is recommended that BMW 320i owners use 5W-40 fully synthetic motor oil, as stated in the owners manual.
Takedown request   |   View complete answer on mcnallyinstitute.com


What kind of oil does a BMW 3 series take?

Oil for most BMW passenger vehicles and SAVs:

BMW TwinPower Turbo Engine Oils - Oils designed for BMW vehicles by BMW. Mobil 1 SAE 0W-40. Valvoline SynPower SAE 5W-30. Castrol Syntec European Formula SAE 0W-30.
Takedown request   |   View complete answer on bimmershops.com


How much oil does BMW 320i take?

Capacity: With filter 5.1 quartsAfter refill check oil level. Torque: Oil Drain Plug...18 ft/lbsReplace drain plug seal.
Takedown request   |   View complete answer on amsoil.com


Do BMWs need special oil?

With motor oil being the most important fluid next to gasoline in your BMW vehicle, it's important that you don't scrimp on the quality or type of motor oil you put in your BMW. That's why BMW recommends the exclusive use of synthetic motor oils inside all BMW engines.
Takedown request   |   View complete answer on bmwofwyomingvalley.com


BMW Change Your Own Oil!



What engine oil is recommended for BMW?

Product Description. The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It's the only oil approved in the US for BMW's turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4.
Takedown request   |   View complete answer on amazon.com


Which is better 5W-30 or 5W40?

5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.
Takedown request   |   View complete answer on differencebetween.net


Can I use 10w30 instead of 5W-30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.
Takedown request   |   View complete answer on rxmechanic.com


Is BMW oil fully synthetic?

BMW Longlife-04 Oil Spec

However, the correct and proper identification for this oil quality standard is BMW Longlife-04. This formula is always a fully synthetic long-life oil with a variety of viscosity options available such as SAE 0W-30, 5W-30, and 5W-40.
Takedown request   |   View complete answer on blauparts.com


What type of oil does a 2005 325i BMW take?

Valvoline SynPower Synthetic Motor Oil 5W-40 1 Quart.
Takedown request   |   View complete answer on oreillyauto.com


What kind of oil does a 2006 325i BMW take?

Castrol Edge Synthetic Motor Oil 5W-30 1 Quart.
Takedown request   |   View complete answer on oreillyauto.com


What oil does a BMW 325i use?

5w-30 synthetic motor oil is required for use in the 2013 BMW 325i. Any brand of oil will do. Make sure it's of the highest quality. You must use the correct type of oil in your vehicle's engine.
Takedown request   |   View complete answer on micdot.com


What is 5w40 oil used for?

5W-40 motor oil

The 5W-40 viscosity is a prevalent recommendation for performance engines in European vehicles with gas-powered engines, and in American diesel pickup trucks. We offer 5W-40 oils for gasoline- and diesel-powered engines.
Takedown request   |   View complete answer on mobil.com


What is 5w40 engine oil?

5w40 engine oil has a winter viscosity grade of five, meaning it's less viscous at very low temperatures, compared to, say, 10w40. It has a hot viscosity grade of 40, which means it is just as viscous as 10w40 at high temperatures but less viscous than oils such as 15w50.
Takedown request   |   View complete answer on totalenergies.in


What engine oil is best for my car?

One of the most important things to get right when choosing oil for your car is the correct grade of engine oil. If you look at the label you'll see a number of digits, such as 10W-40 or 5W-30 – and it's these numbers that you'll need to get right (see below).
Takedown request   |   View complete answer on autoexpress.co.uk


What happens if I put the wrong oil in my car?

Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.
Takedown request   |   View complete answer on machinerylubrication.com


Is 10w30 better for high-mileage?

10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines. Older engines with more than 75,000 miles on them require a thicker oil that will properly lubricate their critical engine parts and prevent oil leaks, sludge, and deposits.
Takedown request   |   View complete answer on repairsmith.com


Will 10w40 hurt a 5w30 engine?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.
Takedown request   |   View complete answer on yourmechanic.com


Can I put 5w40 in my BMW?

BMW says you can use an: 0w40, 0w30, 5w30 or a 5w40 LL-1 oil in the USA. Btw... you can also use a LL-4 rated oil where a LL-1 oil is spec'd, but not vice versa! Maybe who ever changed you oil put too much oil in the engine.
Takedown request   |   View complete answer on 1addicts.com


What happens if I put 5w40 instead of 5w30?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
Takedown request   |   View complete answer on services.totalenergies.uk


Can I mix 5w30 and 5w40 engine oil?

you can mix 5w30 with 5w40, you won't notice much of a difference in regular temperatures, but if you have a high-end, luxury car or performance car, it might be a good idea to use the only 5w40, even in emergencies, as it might cause inconsistencies especially under load which can lead to unwanted damage.
Takedown request   |   View complete answer on drivermoola.com


Can I use 5W-30 in my BMW?

Oil for BMW's must have an API rating of SM or higher; your recommended SAE grade* will vary based on climate. A few of the recommended oils for your 2007 BMW include Mobil 1 SAE 0W-40 and Valvoline SynPower SAE 5W-30. If you live in a cold weather climate, the use of the 0W-40 is best.
Takedown request   |   View complete answer on yourmechanic.com


Is Castrol Edge 5W-30 good for BMW?

EDGE 5W-30 is also approved for use in modern BMW and Mercedes gasoline and diesel engines including those equiped with a DPF that require BMW Longlife -04 or MB-Approval 229.51 specifications. Castrol EDGE 5W-30 is engineered to; - Pass the toughest VW motor oil tests to protect all parts of your engine.
Takedown request   |   View complete answer on hascooil.com


Is Mobil oil Good for BMW?

There are a range of Mobil™ engine oils suitable for the different series of BMW cars such as the BMW 3 series or X3, including oils suitable for petrol engines and oils suitable for diesel engines.
Takedown request   |   View complete answer on mobil.com
Previous question
Why is curly hair unattractive?