What must the driver do when approaching an intersection and seeing the traffic light turn from green to yellow?

What must the driver do when approaching an intersection and seeing the traffic light turn from green to yellow? Slow down and prepare to stop if this can be done without endangering vehicles to the rear.

What do drivers have to do when a vehicle with flashing lights and a multitone horn approaches?

What do drivers have to do when a vehicle with flashing lights and multitone horn approaches? Clear the road immediately and stop immediately.

When traffic signs are absent vehicles coming from the right have the right of way at intersections junctions and traffic circle?

As a reminder, when traffic signs are absent, vehicles coming from the right have the right of way at intersections, junctions and traffic circles. The “right-before-left” rule applies at all intersections regardless of the width of the street or the angle of the intersection.

When a yellow light is flashing at an intersection the driver must do what Korea?

(8) Flashing yellow (caution signal).

Drivers of vehicles may proceed through the intersection while exercising due caution.

What is the minimum distance to park cars from marked or unmarked junctions or pedestrian crossings Europe?

The nearest you can park to a junction is 10 metres (or 32 feet). This is to allow drivers emerging from, or turning into, the junction a clear view of the road they are joining. It also allows them to see hazards such as pedestrians or cyclists at the junction.

How To Handle Traffic Lights | Learn to drive: Highway Code

What vehicles must stop at all railroad crossings?

What do you do with flashing yellow light?

Any flashing yellow signal means drivers are to slow down and proceed through the intersection with caution. A flashing red signal means motorists should come to a complete stop before proceeding.

When at an intersection where the traffic signal is showing a red light and a green arrow this means?

A green arrow displayed at the same time as a red light means the driver can proceed carefully in the direction of the arrow after yielding the right-of-way to other vehicles and pedestrians. You can turn left on a green light.

When you see a yellow arrow at an intersection it means?

When illuminated, this flashing yellow arrow means a vehicle is allowed to cautiously enter an intersection only to make the turn indicated by the arrow, but the driver must first yield to oncoming traffic and pedestrians, then proceed with caution.

When you are stopping your vehicle at an intersection with traffic lights?

If all traffic signal lights are not working because of an electrical power failure, you must stop at the intersection and then proceed when you know other turning and approaching vehicles, bicycles, or pedestrians have stopped. Treat the blacked-out traffic signal as four-way stop intersection.

Who has the right of way at an intersection?

You must also give way to traffic turning right from the right, and to traffic turning left from the opposite direction. If you are turning left, you must give way to traffic going straight from the right. 70. When approaching a junction with a major road, slow down gradually and give way to traffic on the major road.

Which vehicle or vehicles have the right of way?

Four-Way Stops

The first car to arrive has the right of way, which means you must yield to a driver who arrived before you. When three vehicles arrive simultaneously, the vehicle to the right still has the right of way, and the car furthest left must go last.

When you are approached by an emergency vehicle using its sirens and or flashing lights you must?

You must yield the right-of-way to a police car, fire engine, ambulance, or other emergency vehicle that uses a siren and flashing lights. Pull as close to the right of the road as possible and stop until the emergency vehicle(s) has passed.

What should a driver do when an emergency service vehicle approaches with flashing blue lights?

When approaching a congested intersection and the light is green the driver?

Terms in this set (58) What must the driver do when approaching an intersection and seeing the traffic light turn from green to yellow? Slow down and prepare to stop if this can be done without endangering vehicles to the rear.

Where do you need to stop at a red traffic light?

A red traffic light means stop. When approaching a red light at an intersection, the driver should come to a complete stop at the marked stop line. If there is not a marked stop line, the driver should stop before entering the crosswalk.

What should you do if you are approaching an intersection with a flashing yellow signal light quizlet?

Green arrow means go. Flashing yellow arrow means yield to oncoming traffic or pedestrians. Solid yellow arrow means the signal is changing, if you are already in the intersection complete the turn otherwise stop.

When turning left at an intersection controlled by traffic lights displaying a solid green light what must you do?

The traffic coming toward you has a red, so, on your green, you can turn left, right or go straight. Once the green light stops flashing or the arrow switches off, you've got a solid green and you can still turn left - as long as it's clear - before the light turns amber.

When you see a yellow signal light you should?

Yellow Lights

A yellow traffic light is a warning that a red light is soon to follow. You have two options as you approach a yellow light. In most situations, you should slow down and get ready to stop your vehicle before the light turns red.

When a traffic signal light turns green you should?

Explanation A green light tells you that you can go through the intersection. However, you must first yield the right-of-way to traffic and pedestrians who are still in the intersection.

What does a flashing green traffic light mean?

A flashing green light on a traffic signal means the signal is pedestrian activated. So, when you approach a flashing green light, use caution, because the signal could be activated by a pedestrian at any time and you might have to stop and let the pedestrian to cross.

What should you do when approaching a railroad crossing that does not have signals?

When approaching a railroad crossing with flashing lights you must?

Flashing red lights at a railroad crossing means you must stop. Stop at least 15 feet, but no more than 50 feet from the nearest track.

What is the appropriate action to take when approaching a railroad?

Do nothing; all railroad crossings have signals. Increase speed to get across the tracks quickly. Slow down and be prepared to stop. An approaching train is not moving fast enough to be a danger.