What loft driver is best for beginners?

The ideal loft is dependent on your swing speed and shot shape. 10.5º and 12º golf drivers are usually best for beginner golfers as the added backspin only loses a small amount of distance, but keeps your drives much straighter.

What is the easiest driver to hit for beginners?

What kind of driver should a beginner have?

The rule of thumb is that more loft means more forgiveness, making the driver a bit easier to hit. With that in mind we recommend a beginner using a 10.5° or 12° driver.

What is the most common loft for a driver?

The least-lofted golf club, other than a putter, is the driver. Drivers are typically lofted between 8 and 11 degrees, so drivers with lofts of 9.5 and 10.5 degrees are common. The higher-lofted driver is typically a better choice for an amateur player.

Is a higher loft driver easier to hit?

The answer to our question is a higher lofted driver easier to hit is yes. What is this? If you are a slow swinging golfer who needs the added loft to help you consistently launch your ball high and far off the tee.

WHAT DRIVER LOFT IS BEST FOR YOUR SWING

What loft should I use to slice?

Hopefully we've covered this during the review, but if you struggle with slicing your Driver and you have less than 10-degrees of loft, then I suggest you move to a Driver with 10.5 or even 12-degrees of loft. This additional loft will mean that you lose 3-5 yards in distance, but will keep your drives much straighter.

Is 11.5 loft too much?

If you have a mid swing speed of 95-104 mph, a driver loft of between 10-11.5° will normally be a good starting point. If you hit down on the ball, you're likely to have high spin loft, so using less loft will actually reduce your backspin and should help you hit the ball further.

Is a 12 degree driver good for beginners?

A 12 ° driver is a better choice for a beginner golfer as the higher degree of loft will help them hit the ball at a higher angle. 9.5° drivers are better suited for golfers with more experience and a faster swing speed.

Do any pros use 10.5 loft?

At the WGC-HSBC Champions, Dustin Johnson took the title using a TaylorMade SLDR driver with 10.5 degrees loft. Although TaylorMade has recently been touting the benefits of "lofting up" with its new driver, it's actually been a trend on the PGA Tour for more than a decade.

Is a 10.5-degree driver more forgiving?

The primary benefit of the 10.5-degree driver is that it is more forgiving than a lower lofted driver. When you take loft away from a club, you make it harder to hit. Generally, the less loft a club has, the faster a player must swing the club to get the distance and launch results they need.

What is the most forgiving driver for a beginner?

The most forgiving option is the Cobra LTDx Max and geared toward higher to mid high-handicap golfers. The Air X is probably a better driver for pure beginners. But here's why this club should be an option for the beginning everyday golfer: Engineered for total distance above all else.

How do I choose a driver loft?

Choose a loft to try based on your assessed club-head speed. If it is between 95 and 104 mph, a 10- or 11-degree loft will be appropriate. If it is between 105 and 115 mph, a loft between 7 and 9 degrees should be considered. Golfers with club-head speeds below 85 mph should use a loft angle between 14 and 20 degrees.

What is a good golf drive distance for a beginner?

A 1-wood, most often referred to as the driver, should enable the golfer to hit the ball 170-plus yards for a beginner, 220-plus yards for an average player and 250-plus yards for a professional.

Is a higher loft driver better?

With a slightly upward angle of attack—rather than downward—a lower-lofted driver can produce better results. Ko's upward angle of attack is typical of the LPGA Tour. According to TrackMan data, the average attack angle on the LPGA Tour is distinctly upward at +3 degrees.

What shaft flex should a beginner use?

But if a beginner player already has a decent swing motion and generates clubhead speed between the range of 95 to 110 mph or more, then a stiff shaft or extra stiff shaft could be justified to be used by a beginner golfer.

What loft is Tiger Woods driver?

Woods' driver on Friday appeared to be 1.5 degrees open, giving the club a loft of 8.25 degrees total, while the club's sliding weight port was moved towards a draw setting.

What degree driver does Tiger Woods use?

At the 2022 Masters, Tiger Woods used a TaylorMade Stealth Plus+ driver, a 15-degree TaylorMade SIM 3-wood and a 19-degree TaylorMade M3 5-wood. That has been Tiger's standard setup, along with his TaylorMade P·7TW irons (3-PW) since he joined TaylorMade in 2017.

What loft is Dustin Johnson's driver?

Both were 10.5-degree TaylorMade Stealth Plus drivers equipped with LA Golf DJ-Series prototype shafts. On Tuesday ahead of the event, GolfWRX caught up with Johnson to see what's in the bag for 2022, and to get his thoughts on the new red-faced Stealth Plus “Carbonwood” driver.

Is 12 degree driver loft too much?

DOES THE 12 DEGREE DRIVER HAVE TOO MUCH LOFT. The 12 Degree loft driver may be considered by some to have too much loft. But they are not likely the right golfers for that type of club. 12 degrees is not unreasonable, considering that the average driver sits at 10.5 degrees in loft.

What loft driver should a mid handicapper use?

Most mid-handicap golfers have swing speeds between 80-95 MPH and that's why the best driver loft will normally be 11-13 degrees.

Should I use 12 degree driver?

Driver loft will directly impact the distance that you can get with your club. A driver with 9.5 degrees of loft will be best for a golfer with a faster swing speed and a bit more precision. Drivers with 12 degrees of loft help the slower swinging player get the launch and forgiveness that they need.

Will a 9-degree driver help with a slice?

If you start with a 10.5-degree driver, you will likely be able to adjust it up into the 11- or even 12-degree range and down to the 9-degree range. However, if you purchase the 9-degree driver, you may not be able to get the loft quite as high as you will need to reduce your slice.