What kind of plywood goes under vinyl flooring?

Plywood underlayment is a thin plywood material that is most commonly used under resilient flooring materials, such as vinyl and linoleum sheets and tiles.

What is the best plywood to use under vinyl flooring?

APA Trademarked Plywood or Equivalent Agency Certified Plywood rated as suitable underlayment for resilient floor coverings such as tile or sheet vinyl. It should have an Exterior or Exposure 1 exposure durability classification and a fully sanded face.

What type of plywood is used for underlayment?

Plywood Suited for Underlayment

APA-rated Sturd-I-Floor plywood is ideal for underlayment when the surface is integral to how your flooring will perform.

What subfloor is needed for vinyl flooring?

The rule of thumb is any vinyl over 4mm can have a vinyl specific underlayment. With thinner vinyl flooring construction, adding a foam underlayment can effect the locking system strength. Vinyl floors under 4mm should be installed right over the subfloor.

How thick should plywood be for vinyl flooring?

When you install your vinyl on a wood subfloor, the top plywood should be a minimum of 1/4″ thick. For most subfloors, you will need to add an extra layer of wood. To do this, measure and cut the plywood to fit your room.

How To Prep Your Sub floor For Luxury Vinyl Flooring

What wood do you put under vinyl?

In most cases 4-by-8-foot sheets of particle board or plywood must be installed in preparation for the vinyl floor install.

Can I put vinyl flooring over plywood?

Can I install vinyl flooring over wood, plywood, particleboard or chipboard? You can install vinyl over wood floors if you put a plywood subfloor on top of it. Do not install glue down or peel and stick products over particleboard, chipboard or any form of embossed floor.

What is the best subfloor material?

Plywood. Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

How thick should underlayment be for vinyl flooring?

Most vinyl underlayments are 1mm to 1.5mm thick. When dealing with a click lock vinyl of 4mm or thicker, an underlayment has several benefits: It can help smooth over minor subfloor imperfections. It will add extra cushion to the floor, creating a softer feel under foot.

Is it better to use OSB or plywood for subfloor?

OSB has a lower resale value than plywood due to its lower strength. For this reason, few homeowners prefer OSB in their homes. Apart from costs, plywood is superior in all the other areas, such as the strength of the structure. For this reason, it's a superior material for use on the subfloor.

Which is better OSB or plywood?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists.

Should I use treated plywood for subfloor?

There's no need to worry about making treated wood safer that is completely covered in other materials and hidden from access, such as subflooring. Pressure treated wood doesn't release any gases or particulates that could harm you and your family.

How thick should subfloor plywood be?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch.

What is CDX plywood?

CDX Plywood is used primarily by contractors to build exterior walls and roofs. CDX plywood has one side veneer grade “C” and one side veneer grade “D”. The two are bonded together with glue which can withstand a little moisture. The APA would recognize CDX Grade Plywood as C-D Exposure 1 plywood.

Is OSB plywood good for flooring?

Some builders prefer OSB over plywood for flooring because the surface, when new, is always clean, flat, and knot-free. Since OSB is so dense, it's a good soundproofing product. OSB is a more consistent product than plywood or other types of material for subfloor: every sheet is the same.

What's the difference between OSB and plywood?

Plywood is made of many layers of very thin wood, called plys, pressed together with glue. It may be given a veneer ² top of hardwood, while the inner layers are typically made of softwood. OSB is made of many smaller pieces of hardwood and softwood mixed together in strands.

What are three common subfloor materials?

Common Subfloor Materials. There are four primary materials used as subfloor: plywood, oriented strand board (OSB), concrete, and high-performance panels. There are other subfloors materials out there, but they are used in more niche situations. The construction industry is constantly evolving.

Do you need underlay for vinyl plank flooring on plywood?

Plywood Subfloor

There's no need for a moisture barrier underlayment on plywood. It's more important that the underlayment dampens sounds and feels comfortable. An underlayment that offers more cushioning is Armstrong® Flooring Quiet Comfort™.

Is underlayment necessary for vinyl flooring?

If you're wondering about luxury vinyl plank underlayment, that's one of the appeals — it usually doesn't need underlayment. In fact, as a softer flooring, adding an underlayment could mean too much cushion, resulting in dents and more wear and tear sooner. Opt for a dense underlayment if you go for one.

Is plywood a subfloor?

Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.

Can you put vinyl flooring over OSB?

Yes, provided it meets the specifications required for subfloor preparation. Bear in mind that plywood and OSB substrates tend to get 'roughed up' during construction, and any imperfections in the surface will eventually telegraph through to the surface of the floor.

What is floor grade plywood?

Ultipro SC117 Flooring Grade Plywood is a plantation grown temperate hardwood suitable for non-structural use in most moisture resistant and exterior flooring overlay applications. The plywood is FSC certified and sourced from well managed credibly certified forests.

Is pressure-treated plywood better than regular plywood?

Pressure-treated plywood refers to a regular plywood sample that has gone through a special pressurized process to make it more durable and less prone to decay, water damage, and insect damage. In addition, the wood can be treated such that it becomes fireproof.