What kind of nails do you use for molding?

The most common size used in moulding is 1-1/4" (3d) or 1-1/2" (4d) finishing nail. Select a galvanized or stainless steel nail for outdoor use.

What gauge nail is best for molding?

15-gauge – For the outer nail on casing (through drywall) and for base trim or other large trim , and sturdy install of door jambs, particularly heavy, solid-core doors. Non-structural interior applications such as crown molding, door casings or chair rail offer the most choice in the tools and fasteners you use.

Should I use brad nails or finish nails for baseboards?

In terms of best uses, brad nails are better suited for tasks like light decorative trim and molding, paneling, picture frames, and crafts such as birdhouses. Finish nails are better suited for larger trim, such as baseboards or crown molding.

What nails do I use for baseboards?

What size nail should I use for baseboards? As we discussed earlier with nail guns – the best baseboard nails are probably going to be 6d (2'') or 8d (2.5'' for baseboard). These can easily accommodate 15 gauge or 16 gauge nails, giving you a long, durable nail for thick baseboards and studs.

Can I use 15 gauge nails for trim?

A 15 gauge nail can easily split delicate moldings and will leave a much larger hole than a 16 gauge nail head. The 15g finish nailer also has more power, so it can easily blow apart or split small molding.

Spacing

How long should trim nails be?

So it's best, before you begin the project, to be absolutely sure you're using the right nail size for baseboards in your home. As a general rule, baseboard nails shouldn't be any longer than 2 inches. The ideal length is between 1.5 inches and 2 inches.

What is Brad nailer used for?

A brad nailer is a light-duty tool. It might be used for adding narrow decorative moldings to plain panels or under stair treads. These tools are popular with crafters and model makers. They are often used for making birdhouses and bat boxes.

Can you use brad nails for baseboards?

Q. Can you use a brad nailer for baseboards? Brad nailers are suitable for baseboards. Most fire brads as long as 2 inches, which is enough to penetrate a 3/4-inch thick molding, 1/2-inch thick drywall, and bite into the framing lumber in the baseplate or wall studs.

Can you use a brad nailer for trim?

Brad Nailer Pros

Perfect for attaching delicate trims and moldings. The 18-gauge nail usually does not split the trim. It can also be used on smaller baseboards and plywood up to ½-inch.

What's the difference between a brad nail and a finish nail?

Most brad nails are made from a very thin 18-gauge wire. Finishing nails typically range from 16 to 10-gauges and are much more robust than brad nails. Finishing nails also come in a wider variety of lengths than most brad nails do; some can be upwards of 3” in length.

What are 18 gauge brad nails used for?

Brad nails are formed from a fine, 18-gauge wire, so they are smaller in diameter than finish nails and typically have less holding strength. They're better suited for tasks like light decorative trim and molding, panel installation and crafts.

Will Brad nails hold in drywall?

Drywall is a relatively weak kind of material called gypsum plaster, which is also especially vulnerable to water damage. That's why most of the time, 18 gauge brad nails are just too thin to provide enough support.

How do I know what size nail to use?

The accepted rule of thumb is the nail length should be 21/2 times the thickness of the wood you are nailing through. Thus, for 1-inch-thick material, you would use an 8-penny nail and for 2-inch-thick material, you'd use a 16-penny nail.

Can you use 18 gauge nails for baseboards?

Can You Use 18 Gauge Nails (Brad Nailer) for Baseboards? Yes, you can use an 18-gauge Brad Nailer for your baseboards. However, it doesn't have the holding power compared to a 15 or 16-gauge nail.

What is better 16 gauge or 18 gauge nailer?

With a thickness of 0.0625-inch, 16-gauge finish nailers can hold better when compared to 18-gauge brads. It is supplied in lengths of 1 to 3.5-inch. 16-gauge finish nails are perfect for dense pieces of wood.

What are 16 gauge nails good for?

The 16-Gauge Nailer is Versatile

Carpenters use them for a wide variety of tasks including interior trim, baseboard, and crown. You can do stair risers with them, and they're a good option to nail down tongue and groove flooring like near a wall or in a closet where a flooring nailer won't work.

Can you nail molding into drywall?

Use trim nails that will penetrate at least 1/2 inch into the studs. To choose the right-sized nail, add to that 1/2 inch the thickness of the drywall, usually 1/2inch, and the thickness of the trim board. Trim nails should penetrate into wall studs. Standard finish nails usually work fine.

Where do you put nails for trim?

Nailing into the lower third of the molding increases the chance that you'll hit the bottom plate inside of the wall. If installing crown molding, you'll want to nail into the joists and studs at the top and bottom of the molding, which are usually every 16 inches.

Can I hammer in Brad nails?

Luckily, you can definitely use a hammer with brad nails! But there's also a reason many people prefer brad nailers. Hand nailing brad nails comes with a lot of challenges and is rarely the right solution. It's easy to scuff or damage the wood swinging a hammer, and it can be tough to use a hammer on brad nails.