What kind of nailer is used for crown molding?

A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.

What type of nail gun should I use for crown molding?

If you're planning on installing heavier pieces, like heavy crown molding or anything that needs to be able to bear a little weight, pick 16 - 15 Gauge Finish Nailers. Some DIY users recommend the 16 gauge finish nailer as the most versatile option.

Should I use a brad nailer or finish nailer for crown molding?

While the downside to a brad is its holding power, finish nails are made from heavier 15- or 16-gauge wire, which means they can handle a greater payload. For larger trim, such as baseboards or crown molding, a finish nail is the more suitable choice.

What gauge nail is best for crown molding?

15-gauge – For the outer nail on casing (through drywall) and for base trim or other large trim , and sturdy install of door jambs, particularly heavy, solid-core doors. Non-structural interior applications such as crown molding, door casings or chair rail offer the most choice in the tools and fasteners you use.

Do you need a nail gun for crown molding?

Installing it is as simple as buying a box of itty-bitty finishing nails and hammering in the molding. Seriously, you do not even need a nail gun. Here's the whole step-by-step for how to install baseboards and crown molding—note that most of the work happens in the planning phase.

The 5 Best Nailer for Crown Molding You Should Consider in 2021

What's the difference between a finish nailer and a brad nailer?

What's the Difference Between a Brad Nailer vs Finish Nailer? The main difference between these two different nail guns is the size of the nail they shoot. The lower the gauge number, the thicker the nail. The brad nailer fires 18 gauge nails, and the finish nailer fires 16 gauge nails.

Can I use a brad nailer for Crown Moulding?

For crown molding that includes a backing strip, you can use the 2” long 18-gauge brad nails. If you drive one nail up at a steep angle to secure the molding to the backing material, you can then fire the next nail horizontally just above it into the stud.

Can you use 16 gauge nailer crown molding?

The 16-Gauge Nailer is Versatile

Carpenters use them for a wide variety of tasks including interior trim, baseboard, and crown. You can do stair risers with them, and they're a good option to nail down tongue and groove flooring like near a wall or in a closet where a flooring nailer won't work.

Can you use 18 gauge Brad nails for crown molding?

Brad nails typically are sold as 18 gauge steel wire nails that range in length from 5/8 inch to 2 inches. Here are the sizes you need, depending on the project: Use 1-inch nails for the door trim and crown molding. Use 1 1/2-inch to 2-inch nails for shiplap and hardwood flooring perimeter.

Which is better 16 or 18 gauge nail gun?

With a thickness of 0.0625-inch, 16-gauge finish nailers can hold better when compared to 18-gauge brads. It is supplied in lengths of 1 to 3.5-inch. 16-gauge finish nails are perfect for dense pieces of wood.

What is the difference between a 16 gauge and 18 gauge brad nailer?

Brad nailers use smaller 18-gauge nails.

They vary in length from ½ to 2½ inches. By comparison, a 16-gauge finish nail is 0.0625-inch thick. While the difference doesn't seem like very much, the shorter length is a good indicator that a brad nail won't hold material of the same maximum thickness as finish nails.

Which is better straight or angled finish nailer?

When in doubt, the angled finish nailer is more likely to fit into tighter corners compared to the straight finish nailer. Most angled nailers use nails with larger, fuller heads which secure into the material a little stronger compared to the types of nails used in straight nailer versions.

Which is better 15 or 16 gauge finish nailer?

The 15 gauge finish nailer is ideal for heavier jobs. If you're working with thin wood, delicate molding or want a smaller nail head to fill, then the 16 gauge nailer is the better option.

What is the difference between 21 and 30 degree framing nailer?

Nail Capacity – There is a difference in the total number of nails these two configurations can hold. 21 degree plastic collated nails come in strips of 25 nails. 30 degree paper collated framing nails come in strips of 34. With the standard magazine on both nailers they can only hold one strip.

What is a 23 gauge pin nailer used for?

A pin nailer is a small, handheld power tool used to drive tiny, slender nails into wood. It's the smallest power nailer available. It uses small 23-gauge headless nails that look similar to a sewing pin. Most 23-gauge pin nailers use ⅜-inch to 1-inch nails, but some can accommodate up to 2-inch nails.

What is a 15 gauge finish nailer used for?

Let's start with 15 gauge finish nailers. These tools are ideal for projects such as cabinet and furniture building, picture frame assembly, trim and molding installation, and upholstery trim applications. Look for an angled nail magazine on most 15 gauge finish nailers.

Do you nail crown molding into ceiling?

Site Prep. Crown molding is usually nailed to the wall studs along the bottom edge and into the ceiling joists above--a lot of stud-finder work. I skip all that by installing a plywood backer board to the top plate (the horizontal framing member above the wall studs).

What's the difference between a brad and a nail?

Brad nails are formed from a fine, 18-gauge wire, so they are smaller in diameter than finish nails and typically have less holding strength. They're better suited for tasks like light decorative trim and molding, panel installation and crafts.

How do you attach crown molding to the ceiling?

Does crown molding have to be nailed into studs?

Crown Molding

As long as you're inserting the nails into the top 3 inches of wall, locating studs isn't necessary. The exception to this rule is when the crown molding is unusually wide, or features multiple pieces that extend farther down the wall.