What kind of board do you put behind a wood stove?

Things You'll Need

Mount a backer board on the walls adjacent to your wood stove. Backer board is a heat shield that is found behind wood-burning

wood-burning

Wood fuel (or fuelwood) is a fuel such as firewood, charcoal, chips, sheets, pellets, and sawdust. The particular form used depends upon factors such as source, quantity, quality and application.

https://en.wikipedia.org › wiki › Wood_fuel

Wood fuel - Wikipedia

stoves. A heat shield is necessary to protect the walls from damages due to constant use of the stove and to protect your home from possible fires.

What should I put on the wall behind my wood stove?

Common fireproof wall ideas for behind a stove include stone, brick and tiles. The look of a wood burning stove can be enhanced by using a faux panel (such as a stone veneer look) or using a fireback.

Is cement board good behind a wood stove?

Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.

Can cement board be used as a heat shield?

Strong, durable and resistant to water damage, DUROCK® Next Gen Cement Board is ideal for use in partitions, walls, floors and ceilings in residential construction and can be used as a heat shield.

Do I need a heat shield behind a wood stove?

Wood stoves require heat shields both under and behind them to protect your home from heat damage. While many wood stoves include heat shields in their design, some do not. Refer to your wood stove to determine if external heat shields are necessary.

Can you use sheet metal behind a wood stove?

Things You'll Need

Installing sheet metal with the correct clearances behind a wood stove can prevent radiant heat from igniting combustible materials in the wall, which could result in a house fire. The sheet metal is mounted with Z-shaped brackets, leaving a 2-inch gap between the wall and metal.

How close can wood stove be to wall with heat shield?

Minimum space between shield and combustibles: 21 mm (7/8 in.). Minimum clearance along the bottom of shield: 25 mm (1 in.). Maximum clearance along the bottom of shield: 75 mm (3 in.). Minimum clearance along the top of shield at ceiling: 75 mm (3 in.).

What is a heat shield for a wood stove?

What is a wood burning stove heat shield? First off, let's define exactly what we mean when we talk about stove heat shields. Well, as their name suggests, heat shields are panels made from heat-resistant materials such as vitreous enamel, which are designed to protect (and enhance) the wall behind a stove.

Is durock fireproof?

A Durock panel with a thickness of 1/2 or 5/8 inch can provide two hours of fire protection when installed correctly and in conjunction with all fireproofing construction materials.

How far should a wood stove be from a cement board wall?

A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6" from each side and minimum 16" from the front face of the stove and minimum 6" (or the rear clearance to combustibles ...

Is drywall OK behind wood stove?

Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead. Cut right through the drywall using a drywall saw.

Is HardieBacker board fireproof?

Yes, HardieBacker® 1/4" Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace.

How do you protect a wall from stove heat?

If your walls are combustible, you can install a shield on a wall to reduce the stove's clearance area. Like the floor pad, the shield should be made of a noncombustible material, such as sheet metal.

What is non combustible board?

Examples of non-combustible materials include steel, masonry, ceramics and certain insulating materials (such as fiberglass or mineral wool insulation). Gypsum wallboard is considered by the codes to be non-combustible although it does have a thick paper backing that is combustible.

What is the best material for a heat shield?

The best material for a heat shield is one with high thermal conductivity. Aluminium and copper are the two best, whilst steel and bronze are the worst.

Can you put shiplap behind a wood burning stove?

For maximum security, consider using a noncombustible material in your fireplace surround before adding shiplap. Many people will use tile, marble, stone, brick, or steel as surround materials directly around the fireplace opening for their gas or wood-burning fireplaces.

What can I put behind a wood heater?

Heat shields are a type of heat-resistant board placed behind a wood-burning stove or other heating appliance. They are necessary for protecting your walls and floors from damage and decreasing the risk of fire.

What is stove board?

Stove boards are essential wood burning accessories that can be used beneath wood burning appliances or on the wall behind them to protect floors and walls from intense heat.

How much space do you need between wood stove and wall?

Yes. Clearance should be three times the diameter of the pipe, e.g., a 6-inch pipe needs 18 inches of clearance. Heat shields may be used to reduce the clearance by the same ratio as for the stove. For example, with sheet metal you can reduce the clearance by two-thirds, from 18 inches to 6 inches.

How high does a wood stove have to be off the ground?

It stipulated that the “appliance” must be mounted 18 inches above floor level. To be sure, the height of the appliance's pedestal or legs was being factored in as part of the appliance.

What is code for wood stove?

Under NFPA 211: Clearances around residential "room heaters" (wood stoves) shall be not less than 36 inches above and around all sides, and with adequate legs and floor protection.

Can sheet metal be used as a heat shield?

By far the most effective heat shields are the air-cooled type. These shields are constructed with a sheet of 24 gauge or thicker sheet metal, or 1/2" or thicker cement board, with 1" of air space behind the shield and around the perimeter to allow free airflow.

What do you put under a wood stove?

Cinderblock Fireproof Mats

You can use cinderblocks to create fireproof mats for wood stoves. A layer of heat-resistant material over the backer board helps raise the stove and distribute heat, which protects the floor.