What is ton in AC?

Contrary to widespread belief, a ton does not stand for the weight of the AC. Rather, ton or tonnage is the unit used to measure the cooling capacity of the air conditioner based on the size and other features of your room.

Which is better 1 ton or 1.5 ton AC?

1 ton ACs can provide just the sufficient bit of cooling while not going too heavy with the electricity bill. While you compare 1 ton vs 1.5 ton AC, the rule of thumb is that if you have a room which is more than 200 square metres, you should be opting for an AC with a 1.5 ton capacity.

What is ton for air conditioner?

A ton, as used in the HVAC field, is a term that describes how much heat the AC unit can remove from a home in one hour. The measurement for heat is the British thermal unit (BTU). One ton of air conditioning can remove 12,000 BTUs of air per hour. A four ton unit can move 48, 000 BTUs and so on.

How AC ton is calculated?

To estimate your AC tonnage needs, multiply the number of square feet you're cooling times 25. This equals the total number of BTUs you need to adequately cool your space. Next, divide that number by 12,000 to determine the tonnage capability you need in your new air conditioning unit.

How many tons do I need for AC?

First, find out your the area of you room. Then divide it by 600 to get the basic capacity. So, if you room is 100 sq. feet, the basic AC capacity required will be 0.167 tons (100 / 600).

What is Ton In AC explain hindi | ac ton meaning | Ton of refrigeration in hindi | electrical dost

Can a 1.5 ton AC cool two rooms?

1.5 Ton Window AC has to work more for 2 rooms. Cost part will be of 1 AC but time taken to cool the 2 rooms will be more. However O General is much efficient than other ACs . It will serve the purpose better than any other AC.

What is 3 star and 5 star in AC?

The star rating of an electrical appliance is quantified in Energy Efficiency Ratio (EER). A 3-star AC has an EER that ranges between 2.9 to 3.09, and a 5-star AC has an EER of 3.3 or above.

What is 1.5 ton in AC?

“Ton” in AC refers to its power to cool a room similarly like “horsepower” in vehicle refers to its power to run. 1 Ton AC can remove 12,000 BTUS of heat per hour and 1.5 ton AC can remove 18,000 BTU of heat per hour.

Can we use 1 ton AC big room?

For a room of such capacity, a 1 ton AC turns out to be the best air conditioner option as it can cool the place well. It won't take a lot of time for a 1 ton AC to cool down an average living room space. However, if you have a living room which is larger than 200 square metres, then a 1 ton AC might not do the job.

Is 1.5 ton AC enough for what room size?

Room size and power consumption

For instance, a 1-ton window AC or a 1.5 ton split AC is an ideal choice for rooms measuring up to 150-160 sq ft.

What is the capacity of 1 ton AC?

A 1 ton AC can remove 12,000 BTUs of heat per hour whereas a 1.5 ton AC approximately removes 18,000 BTUs of heat per hour. In simpler terms, a 1 ton AC is perfect for a small room lesser than 180 sq ft but a 1.5 ton AC is ideal for medium or large sized rooms larger than 200 sq ft.

What is meant by inverter AC?

In inverter type air conditioners, temperature is adjusted by changing motor speed without turning the motor ON and OFF. Compared to non-inverter type air conditioners, air conditioners with inverters have less power loss and can save in energy.

What is star in AC?

A star rating of an air conditioner is an indicator of its energy efficiency. This rating is awarded by BEE or Bureau of Energy Efficiency. A star rating is a good indicator for a consumer to understand the power required to run an AC.

Is 2 ton AC enough for what room size?

To avoid calculations, the rule of thumb says a 1 ton AC covers up to 100 square feet, 1.5-ton covers around 180 square feet and a 2 ton AC can cool up to 240 square feet of space.

Which AC consumes less power?

Says Abhishekh Jain, founder, Bijlibachao.com, “A 5-star rated window AC is as power efficient as a 4-star split AC. Also, look for an AC with a built-in inverter. Though more expensive, it consumes much less power.” An old 1.5 tonne AC uses around 1.5 units per hour, while an inverter AC uses only 0.91 units per hour.

What happens if I put a 1.5 ton AC instead of 2 ton in a room the size of about 200 sq ft?

A very rough rule of thumb is you need 1000 BTU's for every 40 square feet. 12,000 BTU's equals a ton, so your unit puts out 30,000 BTU's. So 30 X 40 equals 1200 square feet. It should therefore be capable of cooling 1200 sq ft.

Which company AC is best?

Which is better split or window AC?

The capacity of an AC, or its cooling ability, is based on its tonnage. However, split ACs are mounted high and designed for cooling larger spaces, whereas window ACs are better for air circulation in smaller rooms. Further, it is possible to get split ACs of a high tonnage, of above 2 tons.

What is inverter AC and Split AC?

Power Consumption

The inverter AC compressor being a variable speed one, is designed to adapt to the right speed necessary to reach the desired temperature. Whereas the split AC compressors can undergo extreme variations in speed, leading to higher power consumption.

What does 2 ton AC mean?

There's a complicated mathematical formula involved in converting the weight of that ice into energy, but in the end a “ton” of air conditioning capacity represents roughly 12,000 BTU per hour. So a 2-ton unit has 24,000 BTU/hr capacity and a 3-ton has 36,000 BTU/hr, and so on.

Which AC is best for 120 sqft room?

Here is an approximation to assist you in picking the right sized AC for your room: Room Size Up to 120 sqft, AC capacity Needed is up to 0.75 ton. Room Size 121 – 150 sqft, AC capacity Needed is up to 1 ton. Room Size 151 – 250 sqft, AC capacity Needed is up to 1.5 ton.

Why is non-inverter AC better?

Energy Efficiency and Functionality

This feature makes it more energy efficient. In a non-inverter AC, the compressor cannot be controlled. It can go on and off at any time to maintain the temperature within a particular limit, so it will either run at the full capacity or will not run at all.

Why is o General AC best?

O'General air conditioners are famous for their power effectiveness. They are kind of OK in power efficiency and if you mind paying the high cost of this product, then you need to consider this point too that you'll recover this cost in electricity bills after its running of 3-4 years of usage.