What is the winter setting on pool pump?

After a backwash and rinse, place the valve to the “winterize” setting on the top mount valve. This will allow water to drain from the valve. Next, you're going to have to completely drain all the water from the filter tank. To do this simply unscrew and remove the drain cap on the bottom of the filter barrel.

What is winter mode on pool pump?

If your solar pool heating system has a digital controller it should have a 'Winter Mode'. This mode will switch the pump on for 3 minutes daily. This will help to keep the pool and equipment clean, healthy and functioning properly.

Should I run my pool pump in winter?

Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.

What water level should your pool be in winter?

The best way to keep your winter cover on your pool is simply to maintain 2 inches of water on top of it and keep it free of leaves and other debris and monitor the water level inside the pool regularly.

What happens if pool water level is too high in winter?

It is very important to evaluate the water level in your pool and keep your water level well below the coping and tile or otherwise when the water freezes it will expand and the force of the ice will crack tile and coping resulting in expensive repairs.

How To Use Different Pool Filter Valve Settings

Should I put chlorine in my pool during the winter?

Add Chlorine to Your Pool to Ensure a Clean Opening

In the fall, make sure to add chlorine and algaecide to your pool for over the winter. Don't add too much chlorine though. If the chlorine level is too high over the winter, you can bleach the liner.

How long should you filter your pool in winter?

Reduce filter-running times: The pool's filter should operate 3-4 hours each day during winter. If you're using a timer, adjust it to suit. You can save money by switching the filter on during off-peak periods.

Can I leave my pool running all winter?

Yes! You don't have to close the pool, and you can keep it open year 'round, with or without a pool heater. Or for those in very cold climates, you could also consider a very late closing and early opening, winterizing and closing the pool for just 3 or 4 months, instead of the normal 6 or 7 months.

What speed should pool pump run?

The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.

What does Winterizer do for your pool?

Remember, you're shooting for a pH in the range of 7.4 to 7.6. And as with alkalinity, a higher level is better when you're winterizing. This is a proven way to make the water less acidic when swimming in pools. This chemical helps maintain the right level of pH.

Should I turn on pool heater in the winter?

It's more than just maintaining a comfortable temperature for swimming. Because the cold weather risks pipes freezing, you must leave the heater on at all times or else the pipes feeding the pool could freeze and cause expensive damage.

Should I turn off my pool heater in winter?

Don't! It will it cost you more than any savings on electricity. The operating time of pool equipment required to maintain pool water in a good quality state can be reduced in winter as biological activity declines with the decline in water temperature and solar radiation.

What should my pool filter be set on?

Filter. The lever should be on the 'Filter' setting most of the time. This is the setting that provides normal pool filtration by pushing the water through the filter media (sand, glass beads or D.E) that then traps any dirt and debris before the water is returned to the pool.

Should I run my pool pump on filter or recirculate?

Recirculate - This setting is used to troubleshoot problems with the filter sand and is especially useful if you are battling an algae bloom. The water will circulate in the pool normally, but will bypass the filter sand.

What does recirculate on a pool pump mean?

The Recirculate setting allows water to move through the filter without going through the filter media. Note: You can also use the Waste setting for this if you'd rather completely remove the dirty water rather than recirculate it back into the pool.

Can you run the pump with the winter cover on?

Absolutely! A cover does nothing to interfere with the water circulating through your system. It doesn't touch your pump or any other piece of equipment you have. When your pool is covered during these winter months, you can run it less, thus protecting the pump from premature aging.

Do inground pools freeze in the winter?

With the cold months upon us, pool owners may be wondering how to prevent their pools from freezing. Yes, they can freeze solid. If temperatures reach below zero, swimming pools that are not circulating can freeze solid within a few days.

Is it OK to run pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.

How much shock do I need for winter?

Never use chlorine tablets during the winter: you'll want to opt for Assault 73 Shock or Quick Shock granular chlorine once a month (1 pound per 10,000 gallons.) After shocking, run the filter for 12 hours, then shut off.

Does pool shock work in cold water?

The cold water, anything below 65°, has an impact on the ability of the chemicals to dissolve properly. I would recommend using liquid chlorine if you have to shock in lower temperatures. You can dissolve granular shock in warm water. Perhaps it will work if you completely dissolve it before adding it to the pool.

Should I add chemicals to my pool in the winter?

Maintaining your winter pool chemicals is important, whether you use your pool during the colder times of the year or not, because leaves and other debris which fall into your pool affect your pH levels.

How much water should be in inground pool in winter?

If you're using a solid cover, lower the water to six inches below the skimmer or tile line. When using a mesh cover (or none, but you really want to use a cover), lower the water to 18 to 24 inches below the skimmer or tiles.

How much water does pool lose in winter?

An uncovered pool will lose water in the winter to evaporation in the same way it does during the summer. But the water loss is only about a quarter-inch on average during a 24-hour period when the pool is not in use. An uncovered or covered pool can have problems in the plumbing lines or pump.

Should I turn off pool pump in winter?

Even if you have your pool covered, some debris may still get in it during the winter. For this reason, you should consider running your pump on occasion whenever the outdoor temperature is between 35 and 65 degrees. Around four to six hours should be sufficient to remove debris and help promote good circulation.