What is the thickness of shiplap?

Fortunately, shiplap comes in numerous widths to best fit the interior design of your home; however, 5 ½-inch and 7 ¼ -inch are the most commonly used widths. You can use one width of shiplap board to create your home's style, or you can mix the widths to create a unique design.

How thin can you make shiplap?

Shiplap can be expensive but a cheap way to replicate the look is to cut shiplap strips out of thin 1/4" or 1/3" smooth plywood or MDF sheets.

What lumber is used for shiplap?

Today, most interior shiplap is made from pine, poplar, or medium-density fiberboard (MDF). Exterior shiplap is made of cedar, redwood, pine, composite wood, or fiber-cement.

How wide is the gap in shiplap?

Whether you install it on a wall or a ceiling, horizontally or vertically, Timeless nickel gap shiplap is the easiest way to get uniform , one-eight-inch gaps between planks.

Can I use 1x4 for shiplap?

Depending on the final look you want, there are a ton of wood options you can use to make shiplap. Almost any 1x material (nominal 3/4″) is a good choice. You can use select grade for a super smooth look or common grade boards, pine, cedar, really any type of solid wood that suites your needs.

15 Shiplap Don'ts | What NOT to do When Installing Shiplap

Is shiplap 6 or 8 inches?

1x6 shiplap boards are the most commonly used width of shiplap. Smaller than the 1x8 inch width, this 6-inch shiplap size provides the most classic, versatile look.

Can you use 1x6 for shiplap?

Milled smooth on both sides, the 1x6 Tongue and Groove Shiplap Siding can be either stained or painted to enhance your existing décor.

Do you put trim over shiplap?

Trim Shiplap Edges

Another way to finish shiplap edges is to use a trim. Trim is a great way to cover up any gaps and can be used to create a more polished look on any accent wall. It's perfect for adding the finishing touch, so it's definitely something you should consider using if you want a well-finished look.

Should I start shiplap from top or bottom?

The first key to installing shiplap is to always, always, always start at the bottom of your wall! This little piece of advice is actually good for two very important reasons. First, by starting at the bottom, it allows gravity to be a helpful aid as you work your way up the walls.

Do you need drywall behind shiplap?

You only need drywall behind the shiplap if the building codes require you to do so. Although you may not need it, there are drawbacks to not having drywall behind your shiplap.

Should you fill seams on shiplap?

Fill Shiplap Seams With Caulk

To create a seamless look, you'll want to make sure any gaps and edges are filled in with caulk, just like you would fill in nail holes with wood filler when affixing shiplap. Caulking the edges will create clean lines and a finished look.

Can you put shiplap over drywall?

You can install shiplap right over the drywall.

However—and this part is crucial—you must first take the time to find all the studs within your walls and mark them carefully before you place a single board.

Can pine be used as shiplap?

Our raw Pine Shiplap is cut using the finest Pine in North America. It's a tongue and groove product with a perfect 1/8" Nickel Gap. Our pine shiplap is a premium #2 grade, which has small knots and a tight uniform grain. It has a smooth sanded face that takes paint, stains, and washes exceptionally well.

What is the difference between shiplap and tongue and groove?

Shiplap is a type of paneling made from different types of materials with an L-shaped lip on both sides where the panels overlap. On the other hand, tongue & groove refer to a type of paneling that can be made with different types of materials to form an indentation and a protrusion where the groove panels interlock.

Should I nail or screw shiplap?

Nails are the best options when installing shiplap cladding. Trim nails are faster to install than screws since you do not need to predrill the material and won't be risking causing unsightly splits. They can also be easily covered or touched up if needed.

Should you paint shiplap before installing?

Here are some tips to guide you: If you're installing new shiplap, paint it prior to installation. It will be far easier to paint the edges before the shiplap is up on the wall.

How high should shiplap be on wall?

Give some thought to how high you want your trim.

So 1/3 or 2/3 of the wall will look better than half of a wall. It won't be exact, but try to get close. I wanted mine to go a bit higher, but then it would have impeded with the electrical outlet, towel racks, and light switch.

Do you stagger shiplap?

Stagger the shiplap boards so that the end joints are spread out along the wall or ceiling randomly. If you stack seams on top of each other, you'll create an eyesore that draws your eye to the dark lines of the jointed ends. Building pros agree that staggering seams provides a better looking aesthetic.

Is shiplap cheaper than drywall?

Cost and Installation

Drywall panels are cheaper than shiplap per sq. ft., but once you factor in the cost of installation, shiplap usually comes out ahead as the more budget-friendly option. What is this? The average price for drywall is $15 per 4-by-8 foot panel or around $2.15 per sq.

Can you have too much shiplap?

As much as we love shiplap, there can be a time and a place when there is too much shiplap. When you want to fully decorate the walls with shiplap, it is best to stick with soft, neutral colors and limited texture.

What kind of nails do you use for shiplap?

We recommend using 16- or 18-gauge finish or brad nails. 1-½” to 2” in length should be sufficient. Both gauges are strong enough to hold the lumber securely, but small enough as to not leave a large hole on the face of the board. Go ahead and buy the bulk pack: you're going to need it!