What is the thickest oil for cars?

Importance of a Viscosity Scale

The scale ranges from 0W, which is the thinnest type of oil, to a rating of 60, which is the thickest oil. The “W” that you see on oil labels stands for the word "Winter" because this portion of the label shows the viscosity level of oil when an engine is cold.

Which is thicker 10w30 or 10w40?

The viscosity of hot oil is measured using different test parameters than when the oil is cold, so the numbers after the “W” don't relate to the numbers in front of the “W”. The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature.

Is 5w30 thicker than 10w30?

So both the oils 5W–30 and 10W–30 have exactly the same viscosity (SAE 30) when your engine is running, and will perform in the same way. However, the 10W–30 oil will be thicker (higher viscosity) than the 5W–30 when it is cool.

What is a good thick motor oil?

We think Mobil 1™ FS 0W-40 is an excellent choice. It provides the viscometrics of an SAE 40 oil at operating temperature. In Florida's high ambient temperatures, a high viscosity oil can help reduce oil burn-off.

What oil is thicker 5W 20 or 30?

Let's look at 5W-20 vs 5W-30 again. The 5W-20 will remain a little thinner at operating temperature, as indicated by its lower “20” number, while 5W-30 will provide a slightly thicker lubricating film.

Thin or Thick engine oil isn't safe!?

What happens if I put 5w20 instead of 5w30?

5W-20 oil, being the lower viscosity oil (thinner oil) than 5W-30, might help boost your fuel economy. And although you may not notice a vast difference, it does add up over time. However, remember that you should always use the motor oil recommended for your car by your engine manufacturer or mechanic.

Is Thicker oil better for engine?

Thicker Oil May Not Flow Quickly Enough

Its lower viscosity allows it to flow faster and fill the tiny clearances between parts, leading to a durable, consistent lubricating film. Not only that, but the engine will waste energy pumping the thicker oil, reducing fuel economy.

What oil is thicker then 10W30?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

What's the heaviest oil?

Bitumen is the heaviest, thickest form of petroleum.

Does thicker oil last longer?

The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well. As long as you're not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.

Can I put 10w40 instead of 5w30?

Recommended Services

If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Does thicker oil raise oil pressure?

Oil quality and viscosity: When oil is thicker (i.e: more viscous) it faces more resistance when passing through the engine's passages, leading to higher oil pressure. Changing the viscosity grade to a thicker or thinner oil has an effect on the oil pressure.

What oil is thicker 10 or 5 weight?

A 10W or 5W is the index for how easily the oil flows in winter (hence the W). A 10W oil thickens more than a 5W. The other number indicates the oil's resistance to thinning at high temperatures.

What is 20w50 oil used for?

A SAE 20W-50 motor oil is typically used in older vehicles or in particularly warm climates. Castrol GTX 20W-50 has been specially formulated to help extend the life of your engine by keeping it free from sludge, even when operating in extremely high temperatures.

Is thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well.

Is 20w50 thicker than 10w30?

If your engine sees very light duty or is built exceptionally tight, 10W-30 would be fine. But again, if you twisted our arm, we would give 20W-50 the nod for the thicker viscosity.

What number oil is thicker?

The higher the number, the thicker the oil. The lower the number, the thinner the oil. For example, a rating of 5W-30 means that the oil will have a viscosity rating of 30 at 212℉, or 100℃, (an engine's average operating temperature).

Is there a 20 weight oil?

According to SAE classification, there are 11 viscosity grades including 0W, 5W, 10W, 15W, 20W, 25W, 20, 30, 40, 50, and 60. Single-grade motor oils with the W mark indicate that they are for winter temperature applications.

What oil is thicker than 20 50?

It depends on which oil viscosity you compare it with. Compared to a higher viscosity oil, like 20W-60 or even 30W-50, all three are thicker oil grades with high resistance to thinning at hotter temperatures.

Will it hurt to put 10w30 in a 5w30 engine?

Yes. 5w30 and 10w30 are both 30 weight oils and the exact same thickness in your engine when it is at operating temperature.

Which oil is thicker 10w30 or 15w40?

Since 10W-30 is thinner than 15W-40, its film strength can be weaker and it can be more prone to oxidation. Therefore, high quality additives are needed to compensate for those weaknesses in order for 10W-30 to protect as well and last as long as 15W-40.

Does thicker oil burn less?

To slow oil consumption, a higher viscosity grade oil can be used, especially an oil with a higher operating temperature viscosity. Oil burns when at its hottest and therefore thinnest viscosity.

What happens if I use 20w50 instead of 5W30?

A 5W-30 oil is commonly used in passenger cars for normal use throughout the year. A 20W-50 oil will not protect a car as well in a cold winter and its greater viscosity will increase drag and friction in a passenger vehicle.

What happens if you put too thick oil in a car?

If the oil is too thick (aka, the viscosity is high), your car may not start in cold temperatures (cold weather places more strain on a vehicle in any case). When this happens, the thick liquid can't properly lubricate every part, and it creates enough resistance to impair the most important function–ignition.

When should I run thicker oil?

Best Grade of Oil - Low vs High Viscosity

As a general rule, you'll get the best protection in the summer when you use a slightly thicker grade of oil, such as a 10W30 instead of a 5W30. Engines need a thicker oil in the summer months because of the summer heat and its effects on thinning the oil out.