What is the standard size for grommets in curtains?

A grommet that is 1/4 inch larger than the rod diameter slides smoothly along the rod. For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod.

What are the sizes of grommets?

What Are The Standard Grommet Sizes? The most common grommets for banner sizes are 3/16 of an inch, 3/8 of an inch, one half of an inch, 1 inch, 7/16 of an inch, three, in the most widely used size being a grommet is 3/8 of an inch.

How much wider should grommet curtains be than the window?

MEASURE WIDTH

The curtain width should measure 1 ½ to double the width of the window for fullness.

What is the spacing for grommets on curtains?

Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge. If there is a window frame, blinds or shades on the window, you will want the spacing to clear what is behind the rod.

How do I calculate the number of grommets?

Multiply the space available by 1.5 for a typical grommet curtain panel fullness. Divide the result by twice the return amount for the minimum number of grommets the panel must have.

how to measure for grommet drapes

Are all curtain grommets the same size?

Sizing. A grommet that is 1/4 inch larger than the rod diameter slides smoothly along the rod. For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod.

How high do you hang 84 inch curtains with grommets?

If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.

How many inches off the floor should curtains be?

They usually do not. The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.

How wide should curtains be for a 72 inch window?

How Wide Should Curtains Be For A 72-Inch Window? Let's say you want standard, thick curtains to cover your 72-inch window. You'll want to look for curtains that measure between 144 and 180 inches wide.

What size grommet fits a 1 hole?

3/4" Inside Diameter Rubber Grommet - 1/8" Groove Width - Fits 1" Holes.

Are there different types of grommets?

There are two common types of grommets: the plain grommet (sometimes also known as the washer grommet) and the spur grommet. Since both types of grommets are used to reinforce holes, how different can they be?

What is the difference between a grommet and an eyelet?

A grommet is very similar. Grommets are typically used for more heavy duty materials and usually are bigger in size. Eyelets are often used to finish off the opening for a drawstring casing. A buttonhole will serve the same purpose, but an eyelet can be a professional looking detail.

Are 84 curtains actually 84?

If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor. How formal or casual they feel depends on the fabric (cotton versus velvet, for example) as well as the hanging mechanism.

How high do you hang 96 inch curtains?

To find the right curtain length, measure from the floor to where you'll hang the rod (usually 4 to 6 inches above the window frame). Otherwise, hanging the curtain rod just below the ceiling is a simple design trick that makes your ceilings appear taller. Curtains come in standard lengths like 63, 84, and 96 inches.

How far should curtain rod extend past window?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.

What size are #12 grommets?

Our large size #12 and #12L grommets are perfect for curtains, drapery and other large, heavy fabrics and materials. Size 12 and 12L grommets have the same inner hole diameter but the overall (outer) diameter is larger for size 12L.

What is the diameter of a standard curtain rod?

The most commonly sought-after sizes and styles feature a 1 and 3/8 inch (in diameter) size curtain rod to a 2-inch curtain rod, typically for windows with a length measuring between 66-120 inches.

What size are curtain eyelets?

Curtain eyelets are available in four sizes to suit all curtain pole diameters, they are 25mm, 40mm, 50mm and 66mm.

What is fullness ratio for curtains?

Fullness Ratio is the ratio of the width of the curtain before pleating to its finished width when pleated or gathered. The higher the fullness ratio the more gathered and heavier the curtains will be. We recommend a Fullness Ratio of 2.4 to 2.5 for a pencil pleat curtain.

How do you make grommet drapes?