What is the red dot for on a tire?

The red dot may be aligned with a 'dimple' on the exterior of the rim. This indicates a wheel's low point and should be adhered to in the mounting process. By pairing a dot with either the lightest or heaviest weight area, you will achieve the optimum balance point during installation.

Where does red dot on tire go?

First, if the tire has a red dot, the yellow dot is ignored! The red dot is then lined up with either the “low point dimple” (on steel wheels) or next to the valve stem on alloy wheels. Regardless of the type of wheel, if there is no red dot, the yellow dot is positioned next to the valve stem.

What does the red dot on my new tires mean?

The red dot indicates the tyre's high point. Most of the time a wheel will also have a dot—either a drilled dot or a sticker to indicate its low point; if you have these marks, you should align the red dot with the mark on the wheel and ignore the yellow dot.

What is the red dot and yellow dot on tires?

If it is lined up with the yellow dot, the valve stem is located at the heaviest part of the tire. If it is lined up with the red dot, then it is located at the lightest part of the tire. These dots guide the technician to make sure that the tire is properly balanced during installation.

What does a blue dot mean on a tire?

The blue dot represents the high runout location on the wheel, while a red dot on the tire represents the coordination runout position on the tire.

WHAT RED AND YELLOW DOT MEANS ON TIRES WHERE TO PUT RED DOT ON WHEEL

What does orange dot on tire mean?

These are markers or guides to be aligned with particular points on the wheel. The alignment matters for the balancing of the wheel: If these dots on the tires are properly aligned with certain points on the wheel, minimal weights will be used for balancing.

What are colored dots on tires?

The spots on the sidewall of your tires were specifically placed by the manufacturer to guide the tire installation process. In fact, these colored dots serve a specific purpose in helping the tire technician correctly balance the tire.

What does white dot on tire mean?

The White Dot (Dynamic Balancing Dot)

Regardless of the type of wheel, if there is no red dot, mount the tire with the white dot next to the valve stem. The white dot indicates the overall light dynamic balance point of the tire. In other words, it's as though the white dot represents a bit lighter in the area of tire.

What does the green dot on a tire mean?

Green caps on tire valve stems usually mean the tires are filled with nitrogen instead of ordinary air.

What is the yellow dot on a tyre?

The yellow dot indicates the lightest part of the tyre sidewall. On a wheel or rim, the heaviest part is generally the valve stem. During fitting the yellow dot is aligned with the valve stem of the wheel. Having the dot and valve stem in alignment means technicians won't need to use as many balancing weights.

What does yellow circle on tires mean?

Dot Marks The Spot

The yellow dots can help minimize the amount of weight needed to balance a tire and wheel assembly by mounting the tire so that its lightest point is already matched up with the wheel's heaviest point. The yellow dot indicates where the manufacturer has identified the lightest spot on the tire.

Do I need road force balancing?

Is Road Force Balancing Worth It? Yes for many, but this isn't for every car owner. While an overkill for most customers, match mounting or road force balancing tires is useful for extremely low-profile tires as well as in solving persistent vibration problems.

How do you get rid of red spots on new tires?

Where is the dimple on a steel wheel?

If the "dimple" method is used, the rim will exhibit a round dimple approximately 1/4" diameter in size which is pressed into the exposed rim surface under the bead flange area on the valve hole side. Unmarked rims of all types generally have the low spot at the valve hole.

How old can tires be?

It may be tentative, but tires do have an expiration date. There is a general consensus that most tires should be inspected, if not replaced, at about six years and should be absolutely be swapped out after 10 years, regardless of how much tread they have left.

Is when the red dot is lined up with the rim's lowest point?

The red dot should be lined up with the rim's lowest point, which is called match mounting. The yellow dot should be matched up with the rim's heaviest point, which is called weight matching.

What does the red dot on a motorcycle tire mean?

The red dot is the highest point on the tire and should be aligned with the valve stem because most manufacturers will drill the valve stem hole at the lowest point on the wheel. This gives the whole assembly a better shot at being closer to perfectly round to avoid hopping.

Which tire rating provides the least traction?

Traction is graded "AA" (highest), "A," "B" or "C" (lowest). While more than three quarters of all tires are rated "A" or better, only 3 percent are rated "AA." Just over 20 percent are "B" and only one line of tires is rated "C."

What unbalanced tires feel like?

Balancing also contributes to ride comfort: Imbalanced tires will wobble or hop up and down, which causes vibration. If a front tire isn't properly balanced you'll likely feel vibration in the steering wheel. If the problem is in the rear the tremor will be noticeable in the seat or floor.

How often should you balance your tires?

A good rule of thumb is that your tires should be rebalanced every 12,000 miles driven or every other time your tires are rotated. Having your tires rebalanced as part of tire rotation is a quick and easy process that could save you from costly repairs in the future.

What are the two types of tire balancing?

There are two methods for tire balancing performed at your local garage; static balance and dynamic balance.

What happened whitewall tires?

Whitewall Tire Today

Most whitewall tires are now sold on the modified car market and at specialty outlets for car enthusiasts. Most hot rods, low riders, and custom cars will most likely be equipped with whitewall tires. Whitewall tires were replaced by black walls.

Are tires originally white?

Tires were originally a beige color, until manufacturers started adding zinc oxide to the formula to provide a bright white appearance. See all 43 photos In 1910, BFGoodrich was the first company to utilize carbon black in its rubber formula.

Why did old cars have white tires?

When the first automobile was invented, it's tyres were made from natural rubber. Chemicals were then added to make them tougher and more durable. A white substance, zinc oxide, was added to increase traction and it also gave the tyre a white appearance.