What is the R-value of XPS?

XPS Data Summary:

R-value: 4.7 per inch.

Does XPS lose R-value?

The trapped gases in the cells of polyiso and XPS foam assist to provide an initial high R-value. During the life of these foams, air from the atmosphere diffuses in and the trapped gases diffuse out. The result is polyiso and XPS lose R-value over their lifetime.

How much R-value does XPS lose over time?

A popular rigid insulation choice, XPS features an initial R-value of R-5 per inch. That said, the long term R-values of this foam board decline over time. For example, after just 5 years, an XPS board will see its R-value fall by 10%, and even more going forward.

What is the R-value of rigid foam board?

Extruded polystyrene: Extruded polystyrene (XPS) rigid foam is usually blue or pink in color, with a smooth plastic surface. XPS panels typically aren't faced with other material. The R-value is about R-5.

Is XPS foam a good insulator?

Both XPS and EPS provide good thermal conductivity performance. However, the air trapped in the voids in the EPS will conduct heat. A much higher density EPS board will be required to match the thermal performance of XPS insulation.

What is the R value of 2 Inches of Spray Foam Insulation?

What is the R-value of 2 inch Styrofoam?

With an R-value of 13.1 for a 2" thick sheet only two 2" sheets are required to achieve R-25. 2. Extruded polystyrene or XPS (foam is usually pink or blue) XPS has an R-value of 5 per inch of thickness requiring 5" of insulation to achieve R-25.

What is the R-value of 1 inch foam board?

The polystyrene is expanded. Styrofoam insulation is the cheapest material. R-values can range from 3.6 to 4.2 per inch.

What is the R-value of 2 inches of closed cell foam?

R-Value In 2 Inches Of Spray Foam

The R-value ranges from R-3.5 to R-3.6 per inch. The filling of a 2×4 cavity yields about an R-13.

What insulation has the highest R-value?

Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.

What is the R-value of closed cell spray foam?

Closed cell spray foam has an R-value of R-7 per inch. In comparison, open cell spray foam has an R-value of R-3.8 per inch.

Does rigid foam insulation need vapor barrier?

Foam insulation usually does not require a vapor barrier. For some foam insulation types, such as closed-cell spray foam and foam board insulation, the insulation itself stops the movement of most water vapor.

Who manufactures XPS insulation?

DuPont™ Styrofoam™ Brand XPS Insulation is transitioning to a reduced GWP grey color in Canada and select U.S. states. Reducing global warming potential (GWP) and greenhouse gas (GHG) emission, while offering the same thermal performance, moisture resistance, durability and ease of use you've come to expect.

What is the R-value of a Styrofoam cup?

Expanded polystyrene (EPS) is the white foam you see in disposable coffee cups and beer coolers. Its nominal R-value is 4 per inch.

What is the R-value of 6 inch Styrofoam?

One common use of extruded polystyrene foam board is for foundation insulation panels. Polyiso (Polyisocyanurate). This is an even more dense and more expensive foam board insulation. It provides an R-value of 6 per inch of thickness and often comes foil-faced to help reflect radiant heat.

What is the thinnest insulation with highest R-value?

Thermablok® Aerogel is a revolutionary advancement in thermal technology offering the thinnest insulation available to prevent thermal and cold bridging. Classed as a Super Insulation, Aerogel has the highest insulation value of any known material with the lowest thermal conductivity value of any solid (0.015W/mK).

What spray foam has the highest R-value?

Spray Foam

The foam (usually polyurethane) is sprayed to fill cracks and gaps in the attic to form a hermetically sealed barrier. Spray foam provides the highest R-value – while open cell spray foam has about an R-value of 2.2 to 3.5 per inch, closed cell spray foam has about 6-7 per inch.

What is the R-value of spray foam in a 2x4 wall?

Open-cell spray foam absorbs and holds water. It has a lower R-value per inch than closed-cell foam and is vapor-permeable. The R-value is R-3.5 to R-3.6 per inch, so filling a 2×4 cavity yields about an R-13.

What is the difference between pink and blue foam board?

Both are manufactured using the same process and contain similar chemical components. The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company.

Which board is best for insulation?

Polyurethane (PUR) is one of the most efficient insulation materials on the market. PUR is available in the shape of insulation boards or foam. However, the boards have a better insulation value than the foam variant. Moreover, these boards guarantee a certain thickness in advance and nothing has to be taped over.

What is the R-value of 3 inches of spray foam?

The R-value of open cell spray foam is about 3.5 per inch, although the R-value can be different depending on the product. Open cell spray foam has a low density and is many times applied in interior walls and areas that are hard to reach in a home.

What is the R-value of aluminum foil?

Most brands of foil-faced bubble wrap are only 3/8 inch thick or less, and have an R-value of only 1.0 or 1.1.

Does XPS melt?

insulating building envelopes effectively

The service temperature of XPS is typically limited to about 165°F. This falls in line with the instability of a thermoplastic material. In fact, according to an industry Material Safety Data Sheet (MSDS), XPS begins to melt at 194°F.