What is the highest R-value per inch insulation?

Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.

What insulation has the most R-value per inch?

Among insulation types, rigid foam panels have the highest R-value per inch.

What is the thinnest insulation with the highest R-value?

Aerogel insulation offers the highest R-value of any insulating material at less weight and thickness—ideal for construction, refineries, pipelines, and thin-gap thermal barriers.

What is the highest rated wall insulation?

Closed cell foam has the highest R-value of any insulation, around R-6.2 per inch, but can be expensive; open-cell foam insulation values are around R-3.7 per inch of thickness.

What is the highest R-value for a 2x4 wall?

Fiberglass and rock wool batts—2x4 walls can hold R-13 or R-15 batts; 2x6 walls can have R-19 or R-21 products.

Insulation R-VALUE - What is R-Value?

What is the highest R-value for a 2x6 wall?

Thermal Control

The installed insulation R-value for 2x6 fiberglass batt ranges between R-19 and R-21. When blown or sprayed cellulose insulation is used, the R-value is typically R-20 for 2x6 walls.

What is the R-value of 1 inch spray foam?

Open-cell spray foam has an R-value of 3.7 per inch, while closed-cell spray foam delivers an R-value of up to 6.5 per inch. To achieve the R-value requirements of commercial buildings, spray foam insulation would be a more efficient and optimal choice compared to fiberglass.

What is the R-value of wood?

The R-Value of Wood

The R-value for wood ranges between 1.41 per inch (2.54 cm) for most softwoods and 0.71 for most hardwoods.

What is the R-value of Rockwool?

While fiberglass insulation is capable of offering an R-value of about 2.2 to 2.7 per inch of insulation, Rockwool has an R-value between 3.0 to 3.3 per inch of insulation.

What is the R-value of glass?

A single pane of glass has an R-value of about 1. Homeowners often double this by adding a single-pane storm window. These insulation ratings compare to blown-in cellulose insulation with an R-value of 3.6 per inch of insulation.

What is the R-value of aluminum foil?

Most brands of foil-faced bubble wrap are only 3/8 inch thick or less, and have an R-value of only 1.0 or 1.1.

What is the R-value of concrete?

Typically, the type of concrete used for floor slabs has an R-value of 0.1-0.2 per inch of thickness.

What is the R-value of Dow blue board?

DuPont™ STYROFOAM™ Scoreboard Insulation Board (Blue Board) 4 ft by 8 ft Sheet, 1.5" Thick, R value 7.5 A nonstructural, rigid board insulation manufactured of Extruded Polystyrene Foam (XPS).

Do you need a vapor barrier with rigid foam insulation?

Foam insulation usually does not require a vapor barrier. For some foam insulation types, such as closed-cell spray foam and foam board insulation, the insulation itself stops the movement of most water vapor.

Which is better spray foam or fiberglass insulation?

Spray foam insulation has a higher R-value than fiberglass, making it a better insulator. Another difference between them is that spray foam is watertight while fiberglass cracks under moisture. However, installing spray foam requires a professional while fiberglass is easy to install yourself.

What spray foam has the highest R-value?

Spray Foam

The foam (usually polyurethane) is sprayed to fill cracks and gaps in the attic to form a hermetically sealed barrier. Spray foam provides the highest R-value – while open cell spray foam has about an R-value of 2.2 to 3.5 per inch, closed cell spray foam has about 6-7 per inch.

What is the R-value of 2 inch closed cell spray foam?

This microscopic difference in the two products creates a dramatic difference in performance. Closed cell spray foam has an R-value of R-7 per inch. In comparison, open cell spray foam has an R-value of R-3.8 per inch.

What is the thickest insulation you can put in a 2x6 wall?

Insulation for 2x6 Walls

Use R-19 or R-21 kraft-faced fiberglass insulation for two-by-six (2x6) walls. This combination ensures that the insulation is neither too loose nor too tightly packed within the walls.

Can you over insulate a house?

It is possible to over-insulate your house so much that it can't breathe. The whole point of home insulation is to tightly seal your home's interior. But if it becomes too tightly sealed with too many layers of insulation, moisture can get trapped inside those layers. That's when mold starts to grow.

What material has the highest R-value?

Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.