What is the difference between a stapler and a crown stapler?

They come in 7/16-inch or 1/2-inch wide versions and use a thicker wire gauge (16 gauge). Narrow crown staplers use smaller 18 gauge staples. Narrow crown staples are ideal for attaching this lattice without splitting it while providing plenty of holding power.

What is a crown stapler good for?

Crown staplers are great for upholstery, allowing for a tight stretch of fabric. They fasten fabric to wood on the bottom of chairs and couches, where the staple goes unseen. Staples drive deep and hold firmly, but they can damage wood and leave visible holes when removed.

What's a crown staple?

The staple crown is the top middle part of the staples holding the two legs together. There are three types of crowns (narrow crown, medium crown, wide crown), and they all have their capabilities and uses.

What is Crown size on staples?

Crown measurements typically range from 3/16” for projects like molding or trim, where the staple shouldn't be noticeable, to 1” when visibility isn't an issue and a heavy-duty hold is needed, such as installation of wire lathing or roofing shingles.

Can you use a crown stapler for crown molding?

On the other hand, crown staplers are often used for upholstery, roofing, insulation, trimming, molding, sheathing, mattress construction, carpet laying, and more. If you need good holding power to attach two thin materials, such as for attaching fabric to wood, then the crown stapler is best.

Crown Stapler vs Brad Nailer: Learn When To Use Each Nail Gun

Can you use crown stapler for Trim?

Narrow Crown: Narrow crown staplers are generally used for finish and trim applications, such as molding, trim, cabinets, drawers, fascias and other fine-grained applications. The smaller crown allows the stapler to penetrate a surface without being overly noticeable.

Can I use a narrow crown stapler for upholstery?

These fine wire 22 gauge staples have thin wire which allow them to penetrate all types of upholstery. They have a 3/8" Crown (width) so they are wide enough to hold and narrow enough to put in tight places.

Are there different size staples?

Common sizes for the home and office include: 26/6, 24/6, 24/8, 13/6, 13/8 and No. 10 for mini staplers. Common sizes for heavy duty staplers include: 23/8, 23/12, 23/15, 23/20, 23/24, 13/10, and 13/14.

When would you use a narrow crown stapler?

They use narrow crown staplers to attach the backs. Narrow crown staplers are 1/4-inch wide staples and range in length up to 1.5-inch long. They are great at holding across the grain on thin strips like lattice without splitting the wood.

How do I know what size staples I need?

Most staplers will say on the bottom what size staple they take, so before you make a purchase, check the bottom of your stapler first. Often, the size will appear in the metric, two-number form, for example, 23/6.

Can you use a crown stapler for carpet?

Designed for use with 20-gauge, 3/16" Crown staples, the Roberts Professional Electric Stapler is ideal for installing carpeting.

Do staples hold better than nails?

Considering their great holding power, low cost, quick installation and neat finish, they are missing out! With a variety ranging from narrow to wide, staples can provide a superior hold compared to nails in your toughest projects.

Can I use a staple gun for trim?

Some staple guns handle round-crown as well as regular staples, while electric staple guns can handle brads for molding and trim work.

What are the different types of staplers?

What is the difference between stapler and staple?

A stapler is a mechanical device used for joining papers together. The fastener, called a staple, is a 2-pronged shape that's usually made of metal.

What is the difference between narrow crown and crown staples?

The staple is wider (either 7/16" or 1/2") than the narrow crown and the wire gauge is thicker (16 gauge). The medium crown staplers/staples are used to apply floor sheathing and roof sheathing as well as OSB/plywood sheathing on the walls of a newly framed home.

Do you need a special stapler for upholstery?

20 and 22 gauge staples are the most common staples for upholstery. #7 series staples 22 Gauge, #8 (80) series staples 20 Gauge, and T-50 series staples 20 Gauge are commonly used for these applications.

What kind of staple gun is used for upholstery?

Bea 22-Gauge Stapler

Use it to drive staples into hardwoods, drywall moldings, and thick upholstery with ease, and enjoy the fact that it is very quiet.

Can you use brad nails for crown molding?

For crown molding that includes a backing strip, you can use the 2” long 18-gauge brad nails. If you drive one nail up at a steep angle to secure the molding to the backing material, you can then fire the next nail horizontally just above it into the stud.

What size staples crown molding?

The Freeman SSNS18-125 18-Gauge 1-1/4 in. Stainless Steel Narrow Crown Staples are designed for finish work such as base board, crown molding, trim, door and window casings, cabinetry, furniture construction and more.

What size nail do I need for crown molding?

Crown is typically nailed up with a 2” finishing nail and a compressor and finishing gun. Outside corners are usually done with a brad nailer and 1” brad nails with glue. Studs are generally 3-1/2”, drywall a ½” and the crown moulding a minimum of ½”; therefore 2” finishing nails are necessary.

Will a staple gun go through wood?

Staple guns are useful for upholstery, woodwork, and furniture building, along with some construction tasks like fastening subfloors or roofing materials. You'll also see them used for house wrap and fastening wiring or carpet. And some types of staple guns are best for hobbyists or crafters.