What is the difference between a fascia and a barge board?

Another way to think of it is a more vertical fascia board. If you're familiar with fascia boards, you know that they run along the eave where the gutter would mount. Barge boards are found in the gable, running at some type of angle that is more vertical than a standard horizontal fascia board.

How is a barge different to a fascia?

Barge boards and fascia boards are very nearly the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Barge boards run diagonally and are located at the gable end of a property.

What does barge board do?

Bargeboard (probably from Medieval Latin bargus, or barcus, a scaffold, and not from the now obsolete synonym "vergeboard") or rake fascia is a board fastened to each projecting gable of a roof to give it strength and protection, and to conceal the otherwise exposed end grain of the horizontal timbers or purlins of the ...

What is a barge board on a building?

Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.

What are fascia boards?

The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters. Clogged gutters, animal infestation in an attic area and other roof problems might leave you with a damaged fascia board.

Fascia

What is the purpose of fascia?

What is fascia? Fascia is a thin casing of connective tissue that surrounds and holds every organ, blood vessel, bone, nerve fiber and muscle in place. The tissue does more than provide internal structure; fascia has nerves that make it almost as sensitive as skin. When stressed, it tightens up.

What wood is used for barge boards?

The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable. Utile or Iroko fascia, barge and soffit boards are also very good options.

What's the difference between a soffit and a fascia?

An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.

What is the board under the eaves called?

The vertical board that hangs down from the edges is called the “fascia board”. The Fascia, which derives from the same word in Latin (meaning doorframe), serves as a finishing edge that serves both as a decoration and protector for your roof.

What is a barge board and soffit?

Bargeboard. This is the board that is used on the gable end of a house. The condition of the bargeboard can often make or break the look of a house, and over the years it has evolved into some very attractive shapes. Soffit. The soffit board is tucked away under the fascia board.

Do you need fascia board?

The short answer to this question is, “Yes!” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more.

What is the fascia on a roof?

The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline. The fascia supports the shingles and helps to keep moisture out.

How are fascia boards attached?

The fascia board is nailed to the rafter feet and usually has a rebate or lip for the soffit boards to slot into. They are then either fixed to a batten that is attached to the brickwork, or sat on top of the last course of brickwork.

What size is a barge board?

*TIP On most properties bargeboards are between 4.2m and 4.9m long.

What is the best material for fascia boards?

If you are looking to install fascias boards on your own, vinyl material is the best option. Vinyl is also widely used for soffits as well and is an accepted building code standard. It is also very easy to match or complement your siding. It is highly durable and very easy to install.

Are eaves and fascia the same?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake. Felt—The bituminous paper used by roofers, usually made of a combination of asphalt and either paper or rags.

Why is it called fascia board?

The term 'fascia' derives from Latin and means 'band' or 'ribbon'. In classical architecture, a fascia was typically a plain, wide band that ran directly above the columns, across the bottom of the entablature.

What is the edging around a roof called?

Eave: A roof edge that extends past the exterior wall line at the bottom of a slope. Fascia: Vertical roof trim located along the perimeter of a building, usually below the roof level, to cover the rafter tails at the eaves and to seal off the top of the siding along the rake; also called gutter boards.

Do you need fascia and soffit?

While a fascia isn't always necessary for a home or roof, soffits generally are. Without a soffit, not only would the home not have a finished appearance, but the rafters and eaves would be exposed to the elements, and at risk for problems like wood rot, interior leaks, mold growth, and roof deck failure.

What is the wood under the roof called?

Sheathing

The sheathing is the layer of flat wooden boards that attach to your home's rafters or trusses. The most common materials used for sheathing are plywood and oriented strand board (OSB).

Can you install soffit without fascia?

Yes. You can install a soffit without installing a fascia. By using J channels instead of a fascia board, a soffit can be installed under the roof without a fascia.

Which is the best fascia?

Vinyl: Vinyl, with its properties, makes it an excellent choice to make a fascia board. With proficient durability, superior quality, and a lower maintenance cost than wood, make this is a viable option.

What wood should I use for fascia?

Cedar is a popular fascia wood and redwood is another. That's because both of these wood species have some natural rot-resistance, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive.

What timber do you use for fascia?

Timber: Popular hardwood and softwood timber species for fascia board are western red cedar European oak, Utile, Iroko, Douglas fir, Larch and Accoya. The latter is an extremely durable sustainable option. All types can be available FSC certified and suitable for domestic applications.