What is the best way to controlling fire?

The most common method to control a Class-A fire is to remove heat by spraying the burning solid fuels with water. Another control method would be to reduce the oxygen content in the immediate vicinity of the fire (i.e., "smother" the fire), such as by the introduction of an inert gas such as carbon dioxide.

What are the three main way to control the fire?

Fire can be put out by taking away the fuel, stopping the supply of oxygen or by lowering down the temperature around the fuel, so that the fuel is not able to attain its flash point. Was this answer helpful?

How do we control fire short answer?

In the fire extinguishers, carbon dioxide is kept in the liquid form under pressure and it can work well on some of the small flammable liquid. When carbon dioxide is released, it expands enormously and cools down. Due to this temperature it brings down and this helps in controlling the fire.

What is used to control fire?

Steam is used to control fire in confined areas, while inert gas is employed to extinguish gas, dust, and vapour fires. Fire fighting is a battle against time.

How do you control fire and flame?

What is the best way to fight forest fires?

How do we control fire Brainly?

Ways to control fire are :

Use fire extinguisher. It is available at places like hospital, school, mall but we it's mainly not available at home. 2. If fire extinguisher isn't available then use water.

How we can control fire for Class 8?

⇒ For fires involving electrical equipment and inflammable materials like petrol, carbon dioxide (CO₂) is the best extinguisher. CO₂, being heavier than oxygen, covers the fire like a blanket. Carbon dioxide control fire by cutting the contact between the fuel and oxygen.

How can you control the fire class 8?

Generally, water is used to control fire. Water brings down the temperature of the combustible substance below its ignition temperature. The water vapour surrounds the combustible material, thus helping in cutting off the supply of air. So, that the fire is extinguished.

What are the three ways of controlling fire class 7 English?

The fire can be controlled or put out in the following three main ways : (i) We should take away the fuel. (ii) Ordinary fires can be put out with a damp blanket or a sack, (iii) We should remove the heat.

How do you control fire in a building?

How can we control an electrical fire class 7?

What are the three main ways in which a fire can be controlled or put out Vedantu?

Ans: A fire can be put out by removing one of the three things which are responsible for its cause. (i) Ceasing the oxygen supply. If oxygen doesn't reach the fire, it will immediately stop. (ii) Removing the fuel, as burning cannot take place without the fuel.

What is the best way to fight an electrical fire class 7?

Blowing on a burning matchstick or a candle removes the hot air around the flame, bringing down its temperature below the flash point. Sometimes water is sprayed on a fire. It absorbs heat from the burning fuel and lowers the temperature. It also cuts off the supply of oxygen, and therefore, the fire is extinguished.

What is fire class 9?

Fire is the product from a chemical reaction between oxygen in the atmosphere and some sort of fuel. Oxygen, fuel and heat are needed for fire to occur. This is known as the fire triangle. Combustion is when fuel reacts with oxygen to release heat energy.

Why should we control forest fire?

It not only deprives rare biodiversity species of their habitat but often goes out of control, setting even unintended territories on fire. Thus, it is essential to control a forest fire to prevent worse fires. Under certain conditions, the wind may spread a wildfire to dozens of miles away from the source of ignition.

What is fire short answer?

Fire is the visible effect of the process of combustion – a special type of chemical reaction. It occurs between oxygen in the air and some sort of fuel. The products from the chemical reaction are completely different from the starting material.

What can I use for a small fire?

How can we put out small fires?

Pour baking soda on a broken cord. Baking soda contains sodium bicarbonate, which is the substance in Class C fire extinguishers. This procedure works well because of the water produced by baking soda, which will cool and put out the fire completely.

How can we make a fire class 7?

Three things are needed to make fire— fuel, oxygen and heat. Wood, coal, cooking gas and petrol are some examples of fuel. Oxygen comes from the air. That is why, when you blow on smouldering paper, it often bursts into flame.

How fire is a good servant class 7?

Answer: Fire is a good servant. When kept under control fire helps us do many things in most of our home we cook our food on fire. We use fire to keep us warm during extreme winter. It is also used to generating electricity.

What is oil fire class 7?

A fire caused because of inflammable oils like petroleum, kerosene, diesel etc is called oil fire. Question 2: Name two kinds of fire that cannot be extinguished using water.

Which gas is used to stop fire?

Since carbon dioxide is a gas, it is easy to store and distribute. If squeezed into a steel canister, the gas streams out as you open the nozzle. Carbon dioxide is denser than oxygen. So when you spray the carbon dioxide on fire, it sinks under the oxygen, separating the fire from oxygen.

What is fire class 8?

In simple words, when something is burned, hot, luminous gas is released from it. Flame is the name given to this gas which is released. Flames are caused by compounds that evaporate as they burn. Kerosene oil, wax, and other flammable substances are examples.

What are the four main ways to control or suppress a fire?

All fires can be extinguished by cooling, smothering, starving or by interrupting the combustion process to extinguish the fire. One of the most common methods of extinguishing a fire is by cooling with water.