What is the best time of day to run a pool pump?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
Takedown request   |   View complete answer on sunloverheating.com.au


What is the cheapest time to run the pool pump?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Takedown request   |   View complete answer on teddybearpools.com


Does it matter what time of day you run your pool pump?

It's best to run your pool pump during the day

Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Takedown request   |   View complete answer on mrpoolman.com.au


What time of day should I run my pool filter?

For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.
Takedown request   |   View complete answer on knowledgebase.royalswimmingpools.com


How many hours should I run my pool pump in the summer?

So how long should the average pool pump run during the summer? To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours.
Takedown request   |   View complete answer on crystalpoolsfl.com


Should I run my pool pump during the day or at night?



Is it better to run your pool pump at night or day?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
Takedown request   |   View complete answer on sunloverheating.com.au


Does a pool pump use a lot of electricity?

Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.
Takedown request   |   View complete answer on archive.thinkprogress.org


Should I turn off pool pump when raining?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
Takedown request   |   View complete answer on myperfectpool.com.au


Can I leave my pool pump off for a week?

So if you have to leave it running for a week it shouldn't make a big dent in the electric bill. Having to spend the money on getting the pool back in shape will probably cost more than leaving it on anyway. I would make sure you fill the pool water as high as you can though since you will be gone for a week.
Takedown request   |   View complete answer on troublefreepool.com


Do you leave pool pump on all the time?

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
Takedown request   |   View complete answer on poolsuppliescanada.ca


How many hours a day should you run your pool pump in the winter?

Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
Takedown request   |   View complete answer on blog.hayward-pool.com


How much does it cost to run a pool pump 24 hours a day?

12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.
Takedown request   |   View complete answer on beemerpools.ca


Can you swim with pool pump on?

Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.
Takedown request   |   View complete answer on troublefreepool.com


How often should I shock my pool?

How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Takedown request   |   View complete answer on sundancespasedmonton.com


How long should pump run after shocking pool?

A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Takedown request   |   View complete answer on myperfectpool.com.au


How often should I run my pool filter?

You should run your pool pump and filter at least once a day to ensure you get proper filtration. Whether you have an inground pool, permanent above ground pool or portable above ground pool like an Intex, Summer Waves or Best Way pool, you'll want to run your pump daily and on average for 8 hours.
Takedown request   |   View complete answer on myperfectpool.com.au


Why did my pool turn green overnight?

The most common reason pool water turns green is due to algae growing in the water. Algae can grow rapidly, particularly in hot weather, which is why it can surprise you overnight during the warmer months. This generally comes down to an imbalance or lack of chlorine in the water.
Takedown request   |   View complete answer on zodiac.co.nz


How long can water sit in pool without chlorine?

If you are not adding chlorine to kill bacteria, drain the pool every other day. Stagnant water without chlorine can become unhealthy water in as little as 24-48 hours.
Takedown request   |   View complete answer on blog.intheswim.com


Is it OK to swim in a pool without chemicals?

Even from a health standpoint, it is simply not safe to operate a pool without some added “chemicals” to combat bacteria and contaminants in the water. A pool without chemicals is the perfect breeding ground for bacteria, viruses, and parasites.
Takedown request   |   View complete answer on clearcomfort.com


Is rainwater good for swimming pool?

Rainwater itself does not cause algae, but it can provide the right environment for algae. Rain will bring phosphates, nitrates and other organic contaminants into the pool. As we discussed earlier, rain also reduces chlorine levels.
Takedown request   |   View complete answer on aquaramapoolsandspas.com


Should you shock pool before or after rain?

Give your pool a good shock treatment 1 to 2 days before the storm hits. You can bring the chlorine level up pretty high to prolong the pool being depleted of chlorine.
Takedown request   |   View complete answer on poolboys.com


How often do you backwash a pool filter?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.
Takedown request   |   View complete answer on ecooutdoorusa.com


How can I lower my pool pump energy bill?

8 Ways to Reduce Your Pool's Electricity Efficiency
  1. Use the smallest, most energy efficient pump for your pool size. ...
  2. Pool pumps often run longer than necessary. ...
  3. Install and use larger pool filters. ...
  4. Use a timer for shorter pumping cycles. ...
  5. Take a look at the plumbing going to the pool. ...
  6. Clog and debris-free drains.
Takedown request   |   View complete answer on apge.com