What is the best insulation to use in my attic?

Fiberglass, cotton, and mineral wool can all work as loose-fill insulation material, but the far and away top choice for blown-in insulation is fiberglass. Contrary to batts insulation, blown-in fiberglass insulation is perfect for filling in tight voids around wiring, pipes, or any area with awkward framing.

What type of insulation for attic is best?

Spray foam offers the best attic insulation performance available. Choose from two types: closed-cell and open-cell, aka 2-pound and ½-pound, respectively. They sport insulation values of approximately R-6.5 and R-3.6 per inch, respectively.

What R-value insulation should I use in my attic?

R-Value is a measure of insulation's ability to resist heat flow. The higher the R-Value, the better the thermal performance of the insulation. The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.

Which type of insulation is most effective?

Spray foam insulation is the most energy-efficient insulation to create an air barrier in the attic. Certain spray foams can expand up to 100 times its original size, so it fills all of the nooks and crannies in the attic.

Is R30 insulation good for attic?

The average recommended level is 14 inches of R49. In Zone 2, the average minimum requirement for attic insulation is 9 inches of R30 fill. The average recommended level is 17 inches of R60. In Zone 3, the average minimum requirement for attic insulation is 9 inches of R30 fill.

Things To Know Before Insulating Your Attic | Improve Comfort

Can I have too much insulation in my attic?

It's possible to over-insulate an attic as too much will cause moisture buildup and eventually result in mold. Eventually, adding more insulation leads to diminishing returns in trapping heat as well.

Which is better R19 or R30 insulation?

The bigger the R value, the better the insulation is at slowing down the heat transfer. So R19 is better insulation than R13, and R30 is better than R19. The larger the R value, the better the insulation value.

What are the 4 main types of insulation used in homes?

What insulation has highest R-value?

Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.

Is spray foam insulation better than traditional insulation?

Spray foam insulation has a higher R-value than fiberglass, making it a better insulator. Another difference between them is that spray foam is watertight while fiberglass cracks under moisture. However, installing spray foam requires a professional while fiberglass is easy to install yourself.

Should I remove old attic insulation before adding new?

Unless it's water damaged or rodent-infested, you do not need to remove your attic insulation. Remember, if you are concerned about dust and air quality, you need to have your attic air sealed to separate the attic from the house before you add more insulation, otherwise you'll just make the dust problem worse.

How many inches of insulation is R38?

R38 - 10.25 in - Fiberglass Insulation - Insulation - The Home Depot.

Is R60 attic insulation worth it?

Recommended R-Value Varies by State

You need exactly as much as the area you live in determines. Here, where temps get pretty hot for much of the year, attics should have from R30 to R60 (average is R38). Those living up north want anything from R49 to R60. This helps insulate against the extreme cold weather.

What is better batts or blown-in insulation?

Practical and durable: When comparing batt insulation vs. blown cellulose, keep in mind that batt insulation is a more effective thermal barrier. The thermal performance of loose fill insulation will not last for the life of the building. Most blown-in insulation materials will settle and lose R-value over time.

Which is better cellulose or fiberglass blown-in insulation?

At 3.5 per inch of material, the R-value of blown-in cellulose is 23% better per inch than fiberglass batts! According to research done at the Oak Ridge National Lab, fiberglass loses up to 50% of its R-value in very cold conditions; making cellulose a better choice for homes in northern climates.

Should I use spray foam insulation in my attic?

Closed-cell spray foam is a better choice for keeping subfloor moisture at optimal levels, while open-cell spray foam is a better choice for walls and attics, because it allows homes to “breathe.”

What are the 3 types of insulation?

The most common types of materials used for loose-fill insulation include cellulose, fiberglass, and mineral (rock or slag) wool.

What is the thinnest insulation with highest R-value?

Thermablok® Aerogel is a revolutionary advancement in thermal technology offering the thinnest insulation available to prevent thermal and cold bridging. Classed as a Super Insulation, Aerogel has the highest insulation value of any known material with the lowest thermal conductivity value of any solid (0.015W/mK).

How thick is r30 insulation?

8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1" of ventilation air space between the insulation and roof deck. Easy Installation R-30C EcoTouch® Thermal Batt insulation is easy to handle and install.

How do I know what insulation to use?

Depending on where you live and the part of your home you're insulating (walls, crawlspace, attic, etc.), you'll need a different R-Value. Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces.

Is spray foam insulation worth it?

If you see the benefit of insulating your new construction home correctly from the start for long-term comfort, energy savings month after month, and fewer headaches while you live in the house, then spray foam insulation may very well be worth the extra cost to you.

What insulation is best for ceilings?

Spray foam insulation is the most effective type, with a maximum R-value of 6.5 per inch.

Is R19 Good for ceilings?

R-19 insulation is suitable for floors/ceilings in most homes, unless it's the highest ceiling in a house.

What is r21 insulation used for?

The higher the R-value, the more effective the insulation is. Both R-19 and R-21 insulation are commonly used to insulate walls of homes framed with 2-by-6 lumber, and each are recommended by U.S. Department of Energy to efficiently insulate new construction.

What is R 13 insulation used for?

What is R13 Batt Insulation? R13 batt insulation is typically used to attenuate sound in interior wall cavities. It is akin to a large blanket, designed specifically to fill a wall, floor, or ceiling cavity.