What is the best firewood to burn in a fireplace?

Hardwoods such as maple, oak, ash, birch, and most fruit trees are the best burning woods that will give you a hotter and longer burn time. These woods have the least pitch and sap and are generally cleaner to handle.

What kind of wood should not be burned in a fireplace?

Trees like pines, firs, or cypress have "soft" wood, which burns fast, leaves few coals, and makes a lot of smoke that can coat your chimney with soot (not a safe thing in the long run).

What type of firewood is best?

Oak: Known for its long, slow burns, oak is likely the best firewood wood. Oak is a dense hardwood available throughout most regions of North America. While oak wood can take a little longer to become properly seasoned than other firewoods, the fire from well seasoned oak in your wood stove can't be beat.

What kind of wood should be burned in a fireplace?

The best kind of wood to burn is one of the hard woods, such as oak, hard maple and birch because they release more heat and produce less creosote deposits.

What type of firewood burns the longest?

Hickory is the Longest Burning Wood

It's simple, really: it takes longer for the fire to consume hardwood because there is more fuel “packed” into each log. Hickory has the highest density among firewood (37-58 lbs/ft.³), and therefore burns for the longest time.

What is the BEST Firewood to Burn? | Stack-N-Chat Fire Wood Stacking | #66

What is the slowest burning firewood?

Oak. Oak is the slowest wood to season, at approximately 2.5cm a year and ideally should be seasoned for a minimum of two years. Because of its density, it is a wood that's slow to burn as firewood and is best used in a mix of faster-burning logs. This wood can help to keep the fire burning at night if required.

What wood burns with least smoke?

Are Duraflame logs bad for chimney?

Since duraflame^® firelogs are made with dry wood sawdust, only a fine soot is left in the chimney. In fact, tests show that a duraflame^® firelog has 66% less creosote accumulation per hour of fire than the creosote accumulation from burning a wood fire.

What wood creates the most creosote?

In general, hardwoods like oak, ash, and beech are more difficult to ignite, but they last a long time. Softwoods like fir, pine and cedar make more smoke, and therefore more creosote.

Is pine Good for fireplace?

Pine is terrible when it comes to coal production and it is, by far, one of the worst wood types to burn if you want a consistent overnight fire. However, it does make it a good type of wood for outdoor fires because it will burn out quite fast and you won't have to stay up for too long to supervise it.

What is the best and worst firewood?

Which is better firewood hickory or oak?

Hickory firewood is one of the best woods for burning. Hickory is even hotter burning than oak, maple and other popular hardwoods. Hickory is a dense hardwood that can be tough to split, but holds little moisture and burns very well. Hickory is also very popular for cooking.

What firewood smokes the most?

Hardwoods that tend to smoke more than others include eucalyptus, poplar, elm, and others (see below).

Can firewood be too old?

Firewood can be stored for approximately four years without any issues. Burning slightly older wood is better because green, freshly cut firewood does not burn as well. To get the most of your firewood over time, store the wood raised off the bare ground in a sheltered location.

How long does firewood need to season?

How long does it take to season firewood? It can take 3-12 months or longer to season firewood. On average, it usually takes around 6-months to dry out the cut-firewood that you purchased from a store or supplier. Depending on the original timber's moisture content, it can take more or less time to season.

Is ash a good firewood?

Ash: One of the best woods for a steady fire and good heat. Although ash will burn when green, it burns better when seasoned. Birch: This wood smells great and has good heat, but it burns quickly.

Does a hot fire remove creosote?

One method to loosen crusty or tarry creosote so it flakes off and falls down into the firebox or fireplace is to burn aluminum cans in a very hot fire. While this method works, it does not clean the chimney of creosote completely, and chimney brush cleaning is still necessary.

How do I stop creosote buildup in my chimney?

What will dissolve creosote?

Vinegar is a natural acid that will break down the creosote over time. All you have to do is pour vinegar onto the creosote and then wait for it to dissolve. If you want to take a more natural approach, try dissolving the creosote using salt water instead of vinegar or chemical cleaners.

Is wood better than Duraflame?

Firelogs burn much cleaner than real firewood. They typically produce 70 percent less particulate matter, 85 percent less carbon monoxide and 50 percent less smoke.

Why is Duraflame bad?

However, there are some drawbacks to using Duraflame logs. For one, they can be more expensive than traditional firewood. They also produce a fair amount of sparks, which can be dangerous if you have children or pets that are close to the fireplace.

Can I roast marshmallows over a Duraflame log?

Roast your marshmallows over the fire, get them as burnt or as gooey and barely done as you wish, and then slam those babies between two grahams. Use duraflame OUTDOOR firelogs, tested for roasting campfire foods.

How do I stop my chimney from smoking?

How do I stop my fireplace from smoking?

Employ the top-down burn method.

That is, place the large logs vertically in the firebox, add four to five horizontal layers of kindling, top with tinder, and then light. This method for lighting a fireplace creates a hot, fast-burning fire, which minimizes smoke and vapor.

Is Post oak good for fireplace?

Post Oak is a Woodchuck staple, and for good reason. Firewood from the Post Oak tree burns long and slow and produces very little soot, making it not only great for the fireplace, but for barbeque as well. A cord of Post Oak produces 27.9 million BTUs, making it the optimal choice for firewood in terms of heat.