What is the best engine oil for hot weather?

There are a few ways to get your car prepared for summer with synthetic oils. If you're capable of changing your oil, you can find synthetics at auto retailers. Look for containers with codes such as 0W-20, 5W-20, and 5W-30. These correspond to specific synthetic oil mixtures approved for standard vehicles.

Is 5W30 or 10W30 better for summer?

Answer: There is absolutely no need to switch to 10W-30 motor oil in the summer if 5W-30 is an acceptable grade for your engine. While some car manufacturers still advocate the use of 10W-30 (or even 10W-40) as an appropriate engine oil option for summer use, it is completely unnecessary.

Is 5w40 oil good for hot weather?

5w30 oil is designed to operate at temperatures as low as -25°C, but is also a great choice for warmer climates that reach up to 25°C. In general, 5w30 is a great multi-grade oil for different temperature specters. It is also more fuel efficient.

Is 10W40 good for summer?

They are both available in pure conventional form or as high-quality synthetic grades. Either 10W30 or 10W40 for summer use is fine; however, 10W-40 motor oil will better protect your engine.

Is 5w30 good for hot weather?

When should I use 5w30 oil? You should always use the oil recommended by your vehicle's manufacturer. However, 5w30 oil can function in temperatures as low as -30ºC and as high as 40ºC, making it an ideal choice if you drive your car in a place with relatively high seasonal temperature variations.

The importance of choosing the right engine oil quality and viscosity for your car or truck - VOTD

What happens if I use 10w30 instead of 5w30?

Both 5w30 and 10w30 engine oils have a similar SAE rating, meaning that they will perform the same at high or operating temperatures. The digit 30 indicates the viscosity of the oils when in high temperatures. 10w30, however, will thicken more when in a cold climate. 5w30 is much suitable during the cold season.

What temperature is 10w40 oil good for?

However, 10W-40 engine oil is more viscous in hotter climates and has a better temperature spectrum. Here's the recommended ambient temperature range for each oil grade, in general: SAE 10W-30 motor oil: -25°C (-13°F) to 30°C (86°F) SAE 10W-40 motor oil: -25°C (-13°F) to 40°C (104°F)

Can I use 10w40 instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well.

Will thicker oil damage my engine?

Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.

Which oil is thicker 5w30 or 10w40?

This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter. At high temperatures, the 5w30 oil is thinner than that of 10w40 since 30 is lower than 40.

Is 10W30 good for summer?

As a general rule, you'll get the best protection in the summer when you use a slightly thicker grade of oil, such as a 10W30 instead of a 5W30. Engines need a thicker oil in the summer months because of the summer heat and its effects on thinning the oil out.

Is 10W50 better than 10W40?

At 100ºC, the 10W50 has a viscosity of 18.1cS, the 10W40 is at 13.1cS. What this means is, at low temperature, they perform similarly, but at operating temperature, the 10W50 has better protection (higher film strength) than the 10W40.

What happens if you use 10W40 instead of 10W30?

10W40 has a higher viscosity than 10W30. This means that when you pour 10W40 into your engine, it will have a harder time flowing through the engine and moving around the parts. However, if you use 10W40 instead of 10W30, the oil will stay in place better without leaking out or dispersing throughout your engine.

Is it OK to mix synthetic oil with regular oil?

So, can you mix synthetic oil with regular oil? Yes. If it's something you do only occasionally, mixing shouldn't damage your engine.

Is 10W30 better for high mileage?

10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines. Older engines with more than 75,000 miles on them require a thicker oil that will properly lubricate their critical engine parts and prevent oil leaks, sludge, and deposits.

Which oil is thicker 5w30 or 10W30?

So both the oils 5W–30 and 10W–30 have exactly the same viscosity (SAE 30) when your engine is running, and will perform in the same way. However, the 10W–30 oil will be thicker (higher viscosity) than the 5W–30 when it is cool.

What is 20w50 oil good for?

20W-50 is a common motor oil used in moderate-to-large diesel and gasoline engines, high-performance motorcycle bikes, and aviation vehicles. Its resistance to thinning at high heat also makes it popular as a racing oil and high temperature driving.

Which is better 10w50 or 20w50?

10w50 is thinner than 20w50 at low temp. So it will flow between every small parts and gives better cold start as compared to 20w50. First number lower than recommended and second number higher than recommended is good. You can go for 10w50.

What is 10W 50 oil used for?

10W50 oil is a high-performance engine oil that offers outstanding engine reliability and temperature stability under extreme driving conditions. It's used for a wide range of motorsports and modern engines with turbochargers.

What is 10W40 oil used for?

Higher viscosity oil such as a 10W-40 can be useful for older engines burning or leaking oil. We offer Mobil™ 10W-40 high viscosity motor oils for use in vehicles with more than 75,000 miles, and a synthetic blend oil when cost is a consideration.

Is 10w40 good for high mileage?

Designed for high mileage vehicles

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils^†), including: Cars. Trucks.

How do I choose oil grade?

While there is a mountain of information about the various oil choices, the first step is honestly quite simple: Look in your car's manual. The owner's manual for your car will list its recommended oil weight, whether that's a standard format like 10W-30 or something more unusual.

Can I use 5w40 instead of 5w30?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.

What oil is better for older cars?

Monograde oils are still widely available, primarily because they're used in very hot climates, or in heavy-duty applications such as mining or construction equipment. These single-grade oils can be used in 1950s and older cars – generally SAE 30 to SAE 50 – but most owners use multi-grade.