What is the best deck stain that won't peel?

A: Many experts agree that the best finish for pressure-treated wood is a semi-transparent stain. This stain penetrates the wood and won't peel, unlike some solid-colour stains, which sit on the surface like paint and can peel and flake under some conditions.

How do I stop my deck stain from peeling?

Poor Maintenance and Lack of Sealer

The easiest and most effective way to prevent your deck stain from peeling is to go over your deck with a proper sealant. Deck sealers essentially waterproof your deck, keeping moisture from contacting the surface directly.

Which deck stain lasts the longest?

In general, an oil-based deck stain will last the longest, but it also depends on the type of wood, the weather conditions, and how long the deck has gone unprotected before staining.

Do solid deck stains peel?

While solid stain can resist fading from the sun, it won't resist eventual cracking, peeling, or blistering. This is especially true if the wood is often wet or in direct sunlight. No matter how good the solid stain or the painter, solid stain will eventually peel and need recoated.

Is Cabot or Behr deck stain better?

Additionally, we were pleased to see that Cabot Solid Acrylic Siding stain scored very well in their 2014 ratings." And after two years the Behr still looked really good, but the Cabot had started to break down. In fact, the Behr Premium Semi-Transparent Weather Proofing Wood Stain earned top ratings.

Best Deck Stain in 2022 - Top 5 Deck Stains Review

Is Valspar the same as Cabot?

MINNEAPOLIS - The Valspar Corp., Minneapolis, a leading coatings manufacturer, has completed the acquisition of Samuel Cabot Inc., a privately owned manufacturer of exterior and interior stains and finishes.

Are Cabot and Valspar the same company?

Samuel Cabot Incorporated is a manufacturer of wood stain and other wood finishes. It was founded by Samuel Cabot IV in 1877 and remained privately held until it was acquired by the Valspar Corporation in 2005. Its best-known brand is Cabot Stain. Its headquarters are in Newburyport, Massachusetts.

Does Cabot solid stain peel?

To a lesser extent, other products like semi-transparent stains, Cabot Semi-Solid® Stains and Cabot Decking Stains can flake and peel from wood siding or deck structures if these products are over-applied.

What lasts longer semi-transparent or solid stain?

Semi-solid stains are much like semi-transparent stains, except that they have a deeper color and show less of the natural wood grain. They provide longer protection and can also be tinted in nearly any color. Solid stains are nearly indistinguishable from paint.

Why does my deck stain peel every year?

Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. With deck stains, specifically with semi-transparent finishes, more is not better. You only want to apply as much product as the wood can easily absorb.

Is oil based stain better than water based?

If the wood is going to be in direct exposure to wind, rain, and sunlight, an oil-based stain is the best choice. This is because it is more durable than a water-base and will provide a more complete protective layer against these elements.

Is oil or water based deck stain better?

Water-based stains require a little more time and effort than oils, but it pays off with significantly greater durability. Oil based stains are easy to apply and take less effort, but they will not last nearly as long as a water based stain.

Is Behr or Sherwin Williams deck stain better?

Consumer Reports just tested 76 products under tough conditions that accelerate the effects of the elements, from spring showers to summer sun to the sleet and snow that can torment siding and decks in colder months. Sherwin-Williams won big among paints, while Behr took home top honors among stains.

Does Thompsons Water Seal peel?

– THOMPSONS WATERSEAL STAIN & SEALER does not soak into the wood but dries on top like a paint. Less than 6 months it started to fail. Not only is there visible flaking but the coating is washing off in areas that are not flaking.

Can you put a clear coat over deck stain?

Clear finish can be applied over stain or directly to raw wood. It's an extra step, but it's always worth the time. A clear finish provides a protective coat for your wood that guards it against stains, water damage, and natural wear and tear.

What time of day is best to stain a deck?

Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn't too hot.

Should I use semi-transparent or solid stain on deck?

For newer wood, go with clear, transparent or semi-transparent stains — that way some grain still shows through. Semi-solid stains are a better choice for decks that have seen their share of cookouts. You'll still see some grain, but you'll hide more of the wear and tear your deck has endured.

How long will a transparent stain last on a deck?

Panels with clear stains are left for one year, and those with semi-transparent stains are left for two years. Each year of testing tells you how a stain will do after a year on your deck or about three years of weathering on vertical surfaces (siding or fences), as you'll see in our wood stain ratings.

How long does Cabot solid stain last?

Finish durability depends upon weather, wear and other local conditions, but finish typically lasts 10–20 years on siding and fences. FROM PATENT INFRINGEMENT. CABOT WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Can you stain over peeling stain?

If you stain on top of peeling stain, the new layer of wood stain will end up peeling right off with the old one before you know it. Additionally, if you want to make sure you have as even a color as possible you need to use a stripper.

Does Cabot stain require 2 coats?

Cabot Semi-Solid Stains are ideal for use on wood where hiding coverage is desired, yet penetrating wood protection is needed. They also provide an outstanding value as a one-coat finish for recoating previously semi-transparent-stained surfaces.

Is Home Depot deck stain good?

Deck Stain Quality at Lowes Or Home Depot 4.5/5 (130)

Those who have ever bought deck stains at Lowes or Home Depot can attest to the quality of their products.

Does Sherwin Williams own Cabot stains?

About Sherwin-Williams

The company manufactures products under well-known brands such as Sherwin-Williams®, Valspar®, HGTV HOME® by Sherwin-Williams, Dutch Boy®, Krylon®, Minwax®, Thompson's® Water Seal®, Cabot® and many more.

Is Cabot a good deck stain?

Cabot Decking Stain 1480 made the top of the list at Consumer Reports and shows up as a recommendation often in forums. It is a deep penetrating, linseed oil-based stain that should protect the wood for two to three years.