What is the best concrete mix for posts?

For a small to mid sized job I recommend going with premixed. The best concrete mix for fence posts I've found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It's 4000 psi, easy to work with, sets up fast, and doesn't need to be mixed. Just pour it in the hole and soak with water.

What kind of concrete should I use for a post?

Fast-setting concrete is ideal for setting posts because there's no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

What kind of concrete do you use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.

Should I use concrete or cement for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

How many bags of quikrete do I need for a fence post?

1 – 4 bags of concrete per fence post are typically what's needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post's hole needs to be 1/3 to 1/2 of the above ground height of the post.

Truth About Fast-Setting Concrete Mix // Setting Fence Posts

Should pressure treated posts be set in concrete?

With pressure-treated posts, the rot will be slow. We have three ways to solve the rotten post problem. First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel. Concrete should be poured around the post - no concrete under the post.

Which quikrete is best for fence post?

Overall, the 50lb Quikrete Fast Setting Concrete Mix is what I found works best for installing a fence post. It's easy to work with, sets fast, and is very strong.

Is rapid set concrete as strong as normal concrete?

Fast-setting concrete isn't just simple and fast, it's also durable and strong, reaching 4000 psi — or pounds of force per square inch —after a month. That's stronger than the concrete used for foundations on most homes.

What's the best post mix?

In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it's even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).

Can you use normal cement for fence posts?

3 Answers. Show activity on this post. If the setting time is not an issue, you can certainly use normal quickcrete - or save even more money by purchasing cement and aggregate (sand/gravel/rock) and really making use of the mixer. Standard concrete mixing practice is to mix the dry materials and then add water.

How many pounds of concrete do I need for a fence post?

For example: A 6' high fence post 4"x4" needs a hole 12" in diameter by about 2' to 3' deep. That would take four 50 lb. bags of fast setting concrete mix per fence post.

What is the strongest concrete mix?

C40 concrete is the strongest and most durable mix and for good reason townhomes for sale san diego. It can handle almost any abuse, including withstanding corrosion, making it ideal for farm-based and laboratory environments.

What's the difference between quikrete and concrete?

Quikrete is concrete. They're both primarily sand, cement and aggregate stone. The only difference is that Quikrete has some additional ingredients and slight different ratios that make it set up faster. But it's still concrete.

How strong is post mix concrete?

Very strong and extremely durable with a compressive strength of 40N/mm2 at 28 days. Ideal for: • Structural Concrete • Drives • Steps • Paths POSTMIX High quality pre-mixed formulation, specially designed for the fast setting of wooden, concrete or metal fence post.

How long should posts set in concrete?

Typically, you can apply some weight to the posts after 4 hours, but it's a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.

Which is better Sakrete or Quikrete?

Sakrete tends to have big pebbles in their mix, even though their composition is similar. So, you might have to put enough cement down to cover the rocks. Quikrete, on the other hand, is usually easier to mix and work with.

What is the difference between post mix and concrete?

Depending on its application, traditional concrete can take between 24-48 hours and 7 days to set properly and will reach its optimum strength after 25-28 days. Postcrete, on the other hand, is the name given to a post mix concrete, which is a ready to use blend of concrete ingredients that requires no mixing.

Can you use Portland cement for fence posts?

If you must use portland, instead of the just add water type, the mix ratio is 1-2-3. 1 shovel portland, 2 shovels sand, 3 shovels gravel. I add a little Portland cement to sackcrete for a large gate and it works fine, smaller or light weight I just use the bag.

What happens if you add too much water to quikrete?

NOTE: the more water that is added to the mix the weaker it becomes; adding one extra quart of water per 80 lb bag can reduce the strength of the concrete by up to 40%.

How long will a 6x6 treated post last in concrete?

A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone. I suggest you embed the post in concrete, trowel a peak around the post so water runs off, and don't let the PT post come in contact with the ground.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post's aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

How long will a 6x6 post last in the ground?

The length of time that you can keep a treated post in the ground depends on a few different factors. Generally speaking, in the optimal conditions, it can last as long as 40 years. More commonly, though, it will last around 20 years.