What is smithing coal?

Definition of smithing coal

: a grade of caking coal low in sulfur and ash used especially by blacksmiths.

What is blacksmith coal?

Bituminous is the coal-of-choice for the blacksmith. It is a soft, mid-grade, black coal. Mined from deeper mines than lignite, it burns much more cleanly. When burning coal in the forge, we keep a “stock pile” of wet coal on the sides of the fire.

Why do blacksmiths use coal?

It's tougher to light coal than charcoal (which comes from wood), but the resulting forge burns hotter and longer. What is this? This is because coal is hotter than wood, and it burns more efficiently. Thanks to its efficiency, blacksmiths need substantially less of it.

Can you smith with charcoal?

Charcoal is considered the least desirable fuel when blacksmithing. While readily available, charcoal may not even reach the necessary temperature to soften iron and steel without a lot of fuel and constant airflow. You can burn through a lot of charcoal quickly and still not achieve the proper temperatures.

What is forge Coke?

Premium Coke for Blacksmiths and Farriers

A clean burn and high heat output make this the fuel of choice when used on a traditional forge. Anvil Forge Coke is consistent and very clean, producing a hard compact clinker with very little ash residue.

Types of Coal for Blacksmithing - A lesson on coal | Iron Wolf Industrial

What fuel do you use in a forge?

Coal and propane are the most typical fuels used in blacksmith forges. On the East Coast, coal is readily available and therefore more affordable than on the West Coast. Coal burns more efficiently and hotter than wood. Because of its efficiency, the volume of coal needed is substantially less, too.

What burns hotter coal or charcoal?

With this said, charcoal is said to produce an even more energy efficient fire which burns hotter and longer than coal ever could. Although carbon monoxide can be created during the incomplete combustion of coal, it is released in high levels when charcoal is burned.

Can you cook on coal?

While coal in its natural state is never used alone in a barbeque or smoker, it is commonly added to charcoal briquettes to increase the energy density. Both of these are used for creating heat, although for different purposes.

Which coal is best and why?

Anthracite is the best quality of coal which carries 80 to 95 per cent carbon content. It ignites slowly with a blue flame. It has the highest calorific value.

What is the difference between coal and anthracite?

The key difference between anthracite and coal is that anthracite has a higher quality when compared to normal coal. Moreover, compared to other normal coal, anthracite is harder, produces more energy when burned, does not ignite easily, impurities are less, and has higher carbon percentage.

How hot does a coke forge get?

Heating The Metal

The result is coke, a fuel that is almost entirely carbon allowing us to reach temperature of 3,000 to 4,000 degrees Fahrenheit at the core of the fire! Fire this hot can quickly get the metal up to welding temperatures at about 2,500 degrees.

Which is better coal or coke?

Coke is a better fuel than coal. Coke is more efficient and has a higher calorific value than coal.

Why is coke used instead of coal?

The single most important factor is strength ( mechanical compressive ); coal is heated to make coke, the resulting coke is stronger than the original coal. Also, coke helps to make the charge of iron oxides and limestone more porous to permit gas flow up and droplets of liquid iron and slag down.

What is better gas or coal forge?

Gas burns cleaner than a coal forge and is readily available. Some of the drawbacks to using gas is that it's noisier, and it makes the shop hotter in the summer time. Depending on the type of smithing that your doing gas is also generally considered more expensive than coal.

Can you use a grill as a forge?

A cheap barbecue makes a surprisingly effective forge. The tube is attached to a camp-bed inflator fan which pumps air through the charcoal to superheat it.