What is sine Centre?
SINE CENTRE IS BASICALLY ASINE BAR
Angles are measured using a sine bar with the help of gauge blocks and a dial gauge or a spirit level. The aim of a measurement is to measure the surface on which the dial gauge or spirit level is placed horizontally. For example, to measure the angle of a wedge, the wedge is placed on a horizontal table.
https://en.wikipedia.org › wiki › Sine_bar
What is sine Centre Mcq?
Explanation: A sine bar with block holding centres is known as sine centre. It can be rigidly clamped and adjusted in any position. Sine centres can be used for inspection of the conical objects between centres.What is the difference between sine bar and sine Centre?
This type of os sine bar is used to measure angles of conical objects that have male and female parts. Sine centre cannot measure an angle of more than 45 degrees. 2) Sine Table: Sine Table is a special type of sine bar which is large and wide.Why sine bar is used?
A sine bar is used either to measure an angle very accurately or face locate any work to a given angle offering a high degree of accuracy in measuring angles for milling, grinding and inspection applications.What is sine plate?
Sine plates hold workpieces or fixtures at a specific angle to guide accurate machining of angles. Also called sine tables, they have a top plate that tilts out from the surface plate to set up an exact angle.Angle measurement using sine centre
What is limitation of sine bar?
Following are the limitations of sine bar:During the measurement of the angle using the sine bar, the sine bar length must be greater than or equal to the length of the component to be inspected. If the length of the inspected component is too long, there is no sine bar available that is longer than the component.
What is the difference between CMM and Umm?
1. What is the difference between CMM and UMM? Explanation: Co-ordinate measuring machine doesn't inspect the geometric features of the part but universal measuring machine does it. Co-ordinate measuring machine is less accurate than a universal measuring machine.How are Clinometers used?
A clinometer is a simple device used to measure angles. It can be used to measure the slope of a specific terrain, the height of a building or tree, or the declination of a celestial body.What is go limit?
Explanation: 'Go limit' deals with upper limit of shaft and lower limit of hole and refers to the maximum material condition. 'No-go' limits deals with lower limit of shaft and upper limit of hole and refers to the minimum material condition.What is meant by roughness *?
Explanation: Imperfections are bound to be on surface and they take the form of succession of hills and valleys which vary in height and spacing which result in irregularity of the surface. Roughness is the form of these minute imperfections.How sine bar is specified?
Sine bar is specified by the distance between the centres of two rollers i.e., 100mm, 200mm, 250mm, or 300mm, two rollers must be of same diameters. The various parts of sine bar are hardened before grinding and lapping.What is Taylor principle of gauge?
Taylor's principle states that the GO gauge should be designed to cover the maximum metal condition (MMC) in as many dimensions as possible in the same limit gauges. Whereas, NOT GO gauges are used to cover the minimum of metal condition in one dimension only.What is flatness error?
The flatness error describes the deviation of a plane surface from the theoretical plane. The flatness tolerance defines the permissible level of this error. The flatness error is the distance of two parallel planes, which limit the produced flat surface (Fig. 3) [1].What is types of gauges?
Gauges are classified into eight types, they are:
- Plug gauge.
- Ring gauge.
- Taper gauge.
- Snap gauge.
- Feeler gauge.
- Thread gauge.
- Form gauge.
Why are clinometers useful?
A clinometer is a tool that is used to measure the angle of elevation, or angle from the ground, in a right - angled triangle. You can use a clinometer to measure the height of tall things that you can't possibly reach to the top of, flag poles, buildings, trees.What jobs use clinometers?
Uses of a Clinometer
- Geologists and Surveyors. Use of the clinometer with a specific mathematical formula--height x distance x angle--assists geologists to assess the height of a tree or a mountain. ...
- Winter Hikers and Skiers. ...
- Sailors. ...
- City Planners. ...
- Engineers.
What is Abney level in surveying?
An Abney level and clinometer, is an instrument used in surveying which consists of a fixed sighting tube, a movable spirit level that is connected to a pointing arm, and a protractor scale. An internal mirror allows the user to see the bubble in the level while sighting a distant target.What is a SIP measuring machine?
SIP MEASURING MACHINE. The SIP measuring machine is able to realize external measurements (plug, conical gauge, etc), internal measurements (ring, dial snap gauge, etc), thread measurements (major diameter, minor diameter, pitch diameter, pitch, flank angle).What is universal length measuring machine?
The small universal length measuring machine KLM 60 is a precision measuring device for external and internal measurements with a measuring range of up to 120mm. The measuring system used is based on a quartz glass measure with extremely low expansion.Which is not true for CMM?
Which of the following is not related to the geometrical accuracy of CMM? Explanation: Geometrical accuracy concerned with the straightness of axes, position accuracy and squareness of axes while total measuring accuracy concerns volumetric length measuring accuracy and axial length measuring accuracy. 9.What type of tolerance is flatness?
Flatness is a GD&T form tolerance that is conceptually simple. According to the ASME Y14. 5 standard, it “specifies a tolerance zone defined by two parallel planes within which the surface must lie.”How flatness is tested?
Flatness testing is possible by comparing the surface with an accurate surface. This method is suitable for small plates and not for large surfaces. Flatness testing is possible by comparing the surface with an accurate surface. This method is suitable for small plates and not for large surfaces.What is the difference between line standard and end standard?
The most common line standard is the division marked meter rule. When the distance between two parallel surfaces is used as the standard for measuring length, it is known as end standard or end measurement. The end standard is primarily used in the workshop for precision measurement.What is the tolerance of gauge?
What is gage tolerance (gage resolution)? Gage tolerance is the gage's increments of measure (also called resolution or discrimination). The AIAG guideline, called “The Rule of Tens", states that gage resolution should divide process tolerance into at least 10 parts.What is difference between limit fit and tolerance?
Two extreme permissible sizes of a part between which the actual size is contained are called limits. The relationship existing between two parts which are to be assembled with respect to the difference on their sizes before assembly is called a fit. Tolerance is defined as the total permissible variation of a size.
← Previous question
How is balsamic vinegar different from regular vinegar?
How is balsamic vinegar different from regular vinegar?
Next question →
Is LTE internet any good?
Is LTE internet any good?