What is police code 1010 mean?

Police code 10-10 means Negative / Fight in progress.
Takedown request   |   View complete answer on policecodes.net


What do the 10 codes mean?

Ten-codes, officially known as ten signals, are brevity codes used to represent common phrases in voice communication, particularly by law enforcement and in Citizens Band (CB) radio transmissions.
Takedown request   |   View complete answer on en.wikipedia.org


What is a 10 00 in police code?

Police code 10-00 means Officer down, all patrols respond.
Takedown request   |   View complete answer on policecodes.net


Why are police 10 codes important?

These radio signals were invented to help reduce the use of speech on the police radio. In addition, the codes enable a certain amount of privacy to the radio transmissions. Meaning, someone must know the meaning of the signals to understand the discussion.
Takedown request   |   View complete answer on einvestigator.com


What are the 10 radio codes?

Walkie Talkie "10 Codes"
  • 10-1 = Receiving poorly.
  • 10-2 = Receiving well.
  • 10-3 = Stop transmitting.
  • 10-4 = Message received.
  • 10-5 = Relay message to ___
  • 10-6 = Busy, please stand by.
  • 10-7 = Out of service, leaving the air.
  • 10-8 = In service, subject to call.
Takedown request   |   View complete answer on commusa.com


What are common radio codes?

Phonetic Alphabet
  • A – Alpha.
  • B – Bravo.
  • C – Charlie.
  • D – Delta.
  • E – Echo.
  • F – Foxtrot.
  • G – Golf.
  • H – Hotel.
Takedown request   |   View complete answer on kelcomradio.com


What is 10 V and radio talk?

10-4 OK, Message Received. 10-5 Relay Message. 10-6 Busy, Stand By. 10-7 Out of Service, Leaving Air. 10-8 In Service, subject to call.
Takedown request   |   View complete answer on quality2wayradios.com


What are the most important 10 codes?

To help you get started on your journey of learning radio lingo, here's a look at the most common 10 codes and what they mean.
...
Most Common Codes
  • 10-1: Bad reception/Signal weak.
  • 10-9: Say again, or repeat, please.
  • 10-20: Advise to Location.
  • 10-36: Current time.
  • 10-69: Message received.
  • 10-77: Estimated time of arrival.
Takedown request   |   View complete answer on chicomm.com


Why is 10 4 mean?

10-4 is an affirmative signal: it means “OK.” The ten-codes are credited to Illinois State Police Communications Director Charles Hopper who created them between 1937–40 for use in radio communications among cops. Ten-Four Day ~ for decades, Oct 4 has been a day to salute radio operators.
Takedown request   |   View complete answer on dictionary.com


What is a code 10 54?

Police code 10-54 means Possible fatality.
Takedown request   |   View complete answer on policecodes.net


What is a code 10 13?

Police code 10-13 means Advise weather and road conditions.
Takedown request   |   View complete answer on policecodes.net


What is a 1055 in police code?

Police code 10-55 means Intoxicated driver.
Takedown request   |   View complete answer on policecodes.net


What does a 10 19 mean?

In Contact With (police code) 10-19. Return to Station (police code)
Takedown request   |   View complete answer on acronyms.thefreedictionary.com


What does R and P mean in police talk?

Police abbreviation RP means Reporting party.
Takedown request   |   View complete answer on policecodes.net


What is a 1084 police code?

Police code 10-84 means Advise ETA.
Takedown request   |   View complete answer on policecodes.net


What's your 10 meaning?

The phrase essentially means, “What is your location?” or “Identify your position,” but is a corrupted phrase from the original “10-20” used by law enforcement to verbally encode their radio transmissions so that non-police listeners would not easily discover police operations, as well as to communicate quicker and ...
Takedown request   |   View complete answer on 10-twenty.ca


What does your 10-9 mean?

10-9 Repeat last transmission.
Takedown request   |   View complete answer on web.stanford.edu


What does Adam mean in police code?

(Each episode of Adam-12 began with a dispatcher calling "1-Adam-12, 1-Adam. 12....") The first number tells which of the 18 LAPD districts the unit is assigned to, "Adam" is the code for a two-person patrol unit, and the second number identifies the "beat" within the district that unit is assigned to.
Takedown request   |   View complete answer on forum.wordreference.com