What is paralyze mode in Betaflight?

Paralyze. Designed for racing. When activated it shuts down VTX and RX to avoid interfering with other pilots who might be still flying. It can only be reset by unplugging the battery.

What is acro mode called in Betaflight?

Acro mode is also known as manual mode and rate mode. Acro mode doesn't level the aircraft automatically, it will hold its roll and pitch position when you let go off the stick.

What is Headfree mode in Betaflight?

Headfree. In this mode, the "head" of the multicopter is always pointing to the same direction as when the feature was activated. This means that when the multicopter rotates around the Z axis (yaw), the controls will always respond according the same "head" direction.

What is failsafe mode in Betaflight?

Receiver based failsafe is where you, from your transmitter and receiver, configure channels to output desired signals if your receiver detects signal loss and goes to the failsafe mode. The idea is that you set throttle and other controls so the aircraft descends in a controlled manner.

What is Horizon mode in Betaflight?

Horizon mode is the flight mode that allows the pilot to take their hand off the controller as it ensures that the drone remains level without stick input.

Betaflight Paralyze mode What it dose

What is failsafe mode FPV?

A failsafe is what the RC model does when connection or signal is lost between the radio transmitter and receiver. The common causes of a failsafe are: radio signal is out of range when you fly too far away. signal is blocked by obstacles. TX or RX is switched off, lost power or malfunctioning.

What does anti gravity do in Betaflight?

Anti-Gravity is not a flight mode, but a feature. It reduces the “dips” (sudden pitch-down) when you changing throttle rapidly. To do that it basically raises I gain momentarily when throttle is changing a lot, and so I gain will stay the same for the rest of the flight.

What is Acro Trainer mode?

Acro mode uses the RC sticks to control the angular velocity of the copter in each axis. Release the sticks and the vehicle will maintain its current attitude and will not return to level (attitude hold). Acro mode is useful for aerobatics such as flips or rolls, or FPV when smooth and fast control is desired.

What is Pinio Betaflight?

PINIO is an abstraction of simple GPIO (General Purpose I/O) pin facility, and PINIO BOX is a facility to associate boxes (modes) to PINIO. Most targets are build to be capable of configuring up to four pins for the PINIO facility, which can then be controlled by the PINIO BOX facility.

What is the difference between air mode and acro mode?

Acro is a flight mode which doesnt have auto level stuff on so you are free to do anything you want. Airmode (poorly named) is a feature you can turn on regardles if you are in acro mode or not. It just makes it so you have control over your copter while being 0% throttle, making flying more easy and precise.

What is FPV angle mix in Betaflight?

For anyone that doesn't know, FPV Angle Mix changes the controls so that roll and yaw are relative to the camera, instead of to the flight controller. If you're a beginner with a 10 degree camera angle, you won't notice any difference.

What are flight modes?

Flight mode is a setting on a mobile phone or wireless gadget that disables the device's signal-transmitting ability but allows for the use of its other functions.

How do you enable turtle mode in Betaflight?

In Betaflight Configurator, Configuration tab, select DShot protocol (DShot150, 300 and 600 all support turtle mode). Move over to the Modes tab, and assign a switch on your radio to “Flip Over After Crash”.

What is D Max in Betaflight?

The intent of the feature is to allow you to run higher “D_max” values for help during sharp movements, while keeping D gains closer to “D_min” while cruising in order to keep your motors cooler when you don't need the extra D gains.

What is a failsafe on a drone?

Failsafe is a software add-on that eliminates propulsion system failures for any quadcopter drone. Using advanced control algorithms to enable faulty drones to fly with just two propellers, Failsafe enables safe, controlled emergency landings.