What is most important in an emerald cut?

The emerald cut is made up of parallel lines so symmetry is very important. You don't want a wonky-looking stone. Like cut, symmetry is usually graded from Excellent to Poor so make sure you choose a diamond with a symmetry grade at the higher end of the scale.

What should I look for in an emerald cut?

An emerald cut diamond typically consists of 57 facets and boasts an elongated rectangular shape with cut-off corners–its appearance is commanding. Instead of the brilliance and sparkle you're used to with round or cushion diamonds, you'll see flashes of light in the emerald cut due to its linear, straight facets.

What is most important in an emerald cut diamond?

For this reason, clarity is one of the most important gradings to consider for an emerald cut diamond. Step cut stones are generally not as bright and never as fiery as brilliant cut stones.

What is special about emerald cut?

Emerald cut diamonds have a large surface table and deep clarity. Through their long step cuts, emerald cut diamonds offer abundant reflections both of colored and white light.

Is color or clarity more important in an emerald cut diamond?

Because Emerald cut diamonds require higher color and higher clarity in order to face up white and eye clean, choosing an emerald is a way to showcase value.

Emerald Cut Diamonds Education

How do you tell a good quality emerald?

The most-prized emeralds are highly transparent. Their color is evenly distributed, with no eye-visible color zoning. If the hue is too yellowish or too bluish, the stone is not emerald, but a different variety of beryl, and its value drops accordingly.

Is VS2 OK for emerald cut?

The clarity rating for an emerald cut diamond should be no less than VS2 clarity; otherwise the inclusions will be more visible. When purchasing step cut diamonds, make sure the color grading is no lower than H to I color. J to K color grades will make the diamond look slightly tinted.

How important is depth in emerald cut diamond?

The proper depth percentage for an emerald cut is between 65% and 75%. You will find that an emerald cut diamond cut within this range will deliver more brilliance. An emerald cut diamond cut shallower than 65% will let a greater percentage of light leak through the pavilion which results in less diamond brilliance.

What does emerald cut say about you?

Emerald shape diamonds have long facets & layered corners that resemble stairs and, like its wearer, is strong and bold. This stone shape is for the woman who enjoys flashy and exuberant fashion. An emerald shape will highlight clarity better than any of the other shapes.

Why do emerald cut diamonds not sparkle?

Even though this shape usually features 58 facets, emerald cut diamonds are less sparkly due to their step cuts. The emerald cut puts more emphasis on the clarity of the diamond than its sparkle. Get a diamond with excellent polish and excellent symmetry grades to maximize its sparkle.

What is the best ratio emerald cut diamond?

Length to Width Ratio

The emerald-cut diamond may be rectangular in shape but rectangles vary. Some are long and thin, while others are short and wide. Many people favour the classic emerald cut look, which has a length to width ratio between 1:3 and 1:4.

What is the most sought after diamond cut?

Not only is a round diamond the most expensive diamond cut to manufacture, but it's also the most in-demand stone shape for diamond engagement rings and many diamond jewelry styles. In fact, nearly 75% of all diamonds sold worldwide are round brilliant cuts.

What color is best for emerald cut?

ROSI generally recommends a color of H for an emerald cut diamond: the flashing facets will still look almost colorless. Clarity should be at least SI1 (or better whenever possible.) The most visible factor in the appearance of your emerald cut is the length to width ratio.

Are darker or lighter emeralds more valuable?

Darker emeralds are often considered more valuable, but if an emerald becomes too dark, it becomes less valuable. Emeralds with medium to medium-dark tones are the most valuable emeralds in the market.

Do emerald cut diamonds chip easily?

Avoid diamond shapes with points or sharp corners.

Emerald cuts, triangular shapes, radiants and princess cuts are at higher risk for chips. Round oval and rounded corner cushions are safer, because they don't have sharp corners or points.

What is the cheapest cut diamond?

Radiant Cut

Radiant are square or rectangular brilliant-cut diamonds with cut corners. They are often the most affordable diamond shapes.

How many carats is Meghan Markle's diamond ring?

The cushion-cut center diamond of Meghan's engagement ring is estimated to be roughly three carats and was sourced from Botswana — a country that is very important to Prince Harry and where the couple took their first vacation together.

Why do people like emerald cut diamonds?

The emerald cut provides a large surface table with deep clarity, along with lengthy step cuts that offer abundant reflections of both colored and white light. Popular among brides seeking larger stones at lower price points, emerald-cut diamonds typically look larger than other diamond shapes in the same carat weight.

What setting makes your diamond look the biggest?

If you select a setting with a slim band and slim prongs, your center diamond will look larger in comparison. On the other hand, if you choose a wide band with bulky prongs, your diamond will look smaller. So if you want your center stone to look as large as possible, always select a slim, delicate setting.

Do emerald cut diamonds sparkle rainbow?

Genuine diamonds do not sparkle in rainbow colors inside of the stone. Instead, the inside of real diamonds sparkles in tones white and gray.

Why does emerald cut look smaller?

Emerald cut diamonds depth percentage is also an important characteristic in its look, with a depth of 60% to 69 %. An emerald cut with a depth of over 70 % is usually too heavy and will appear smaller than the actual carat weight.

What's better VS1 or VS2?

What do the numbers 1 and 2 mean – VS1 and VS2? A VS1 diamond has slightly fewer and smaller inclusions than a VS2 diamond. In other words, a VS1 diamond is slightly better than a VS2 diamond.

Is lighter or darker emerald better?

An emerald can have a light, medium or dark tone which means that it will be a light shade of green, a moderate green or a dark green in colour. The most valuable and most attractive emeralds have a medium to moderately dark tone.

Who wears an emerald cut diamond?

An emerald-cut diamond is a timeless choice, offering both modern and vintage elements. This cut has become increasingly popular over the last few years, with celebrities such as Paris Hilton, Beyoncé, and Nicola Peltz all wearing this style of ring.