What is meant by IPS flooring?

IPS flooring generally stands for Indian Patent Stone which is also considered as a cheap flooring. The constituent of this type of flooring is cement, admixture, down 10mm coloured/white chips mixed with required water of around 35-50 mm thick on rcc/pcc surface.

What is IPS material?

IPS flooring stands for Indian patent stone flooring, it is a basic type of flooring which provides good wearing properties. It is generally used for all types of floors and mix of concrete used for IPS flooring specification is 1:1.5:3 (cement, sand and stone aggregates).

What is the difference between VDF and IPS flooring?

Unlike IPS, a VDF floor calls for a more skilled labour with almost twice as many man hours over the same stretch..... This system raises the cost as there is machinery required, but appearance wise and strength wise the VDF (Vacuum Dewatered Floor) floor stands out......

What is VDF flooring?

VDF Flooring stands for Vacuum Dewatered Flooring. This is a special technique to do the Concrete Flooring to increase the Compressive Strength, Tensile Strength, Abrasion Resistance and to minimize the Shrinkage and Floor Wraps. VDF Flooring results in High Strength, Longer Life, Better Finish and Faster Work.

How do you do granolithic flooring?

Granolithic concrete is prepared in a proportion of 1:1:2 by mixing cement, fine aggregate and specially chosen aggregate, and laying the topping layer over the prepared base. Granolithic topping surface is allowed to be set for 7 days and the surface may then be rubbed to obtain a good surface.

What is IPS Flooring

What is granolithic floor finish?

Granolithic flooring differs from ordinary concrete flooring in that it uses an aggregate, or mix of materials, instead of a single uniform cement. This style of flooring mixes marble chips directly into the cement. The marble chips give the finished floor a distinctive “mosaic” look.

What is known as granolithic flooring?

Granolithic screed, also known as granolithic paving and granolithic concrete, is a type of construction material composed of cement and fine aggregate such as granite or other hard-wearing rock. It is generally used as flooring, or as paving (such as for sidewalks).

What is PCC flooring?

Plain Cement Concrete (PCC) consists of cement, fine aggregate, coarse aggregate and water. ... As bed concrete below the wall footings, column footings and on walls below beams. As sill concrete to get a hard and even surface at window and ventilator sills. As to coping concrete over the parapet and compound walls.

Is code for IPS flooring?

IS 2571: Code of practice for laying in-situ cement concrete flooring.

What is fm2 flooring?

FM-2 CATEGORY FLOOR

Typical floor use- Building containing wide aisle racking with stacking or racking over 8-m high, free movement areas and transfer areas.

What is the procedure of construction of IPS flooring?

Construction Process of IPS flooring

after pouring of concrete, surface to be leveled with A straight edge and surface with wooden float or trowel. cement punning 2 to 3 mm thicker is spread over IPS flooring to archive glossy look of floor. curing period of minimum 15 day is required after construction.

What is Indian patent stone?

Indian Patent Stone or IPS flooring can be grey or coloured. When red, it is also referred to commonly as "red oxide flooring" and was used extensively in old houses. It is a basic but beautiful flooring which provides go... od wearing properties.

What are the exams for IPS?

To get into the Indian Police Service (IPS), you need to clear the Civil Services Exam (CSE) conducted by the Union Public Services Commission (UPSC) with high marks. Civil Service Exam (CSE) is a common exam conducted by UPSC for the recruitment of candidates to various services like IAS, IPS, IFS, IRS etc.

What is the minimum thickness of PCC?

The Thickness of PCC: The thickness of PCC is normally 50mm over Brick Flat Soling (BFS). If you don't use BFS below PCC then the thickness should be 75¬mm. When the PCC is used in car parking area then the thickness should be 75mmover BFS.

Is code a vitrified tile?

69079010 - Other: Vitrified tiles, whether polished or not HS Code and Indian Harmonised System Code.

What is terrazzo tiles?

Terrazzo is a flooring material traditionally made by exposing marble chips on the surface of concrete and then polishing until smooth. Now, however, you can buy terrazzo in tile form. It's often used in public buildings because it's long-lasting and can be refinished repeatedly.

What is RCC flooring?

Floors of modern buildings are invariably made of reinforced cement concrete (R.C.C.), because of the inherent advantages of this type of construction. Concrete, though strong in compression, is weak in tension. However, it. is suitably reinforced with the help of steel bars which take the entire bending tension.

What is CC flooring?

Cement concrete flooring is one of the most common types of flooring used in both in residential as well as public buildings owing to its non-absorbent nature and thus it is very useful for water stores, durability, smooth and pleasing in appearance, good wearing properties, easy maintenance and is economical.

What is PCC and RCC?

Reinforced cement concrete (RCC) is PCC + reinforcement. The reinforcement is generally steel bars bent and laid into the desired shape and orientation. The reinforcement can be both tensile or compressive reinforcement depending upon the situation. However, mostly both are used in any structural member.

Where is granolithic flooring used?

Granolithic is also known as granolithic paving and granolithic concrete is a type of construction material composed of cement and fine aggregates, such as granite or other resistant rocks. It is generally used as a floor or paving.

What is Grano used for?

Grano Dust is gritty aggregate typically manufactured from either limestone or granite. Widely used in construction and building it is a flexible material. Suitable for paving and under artificial grass.

What is the meaning of granolithic?

Definition of granolithic

: relating to or composed of a mixture of crushed granite and cement.

What is the meaning of FFL in construction?

Finished floor level (FFL) refers to the uppermost surface of a floor once construction has been completed but before any finishes have been applied.

How is terrazzo different from concrete?

One of the biggest differences between terrazzo and polished concrete will be the cement-to-aggregate ratio. Polished concrete will contain more cement whereas terrazzo will contain more aggregate. For example, cementitious terrazzo requires a minimum of 70 percent marble-chip material and a 30 percent cement matrix.