What is Marshall Plexi sound?

The Plexi sound is synonymous with incredible volume and crunchy overdrive, as guitarists of the '60s cranked the volume do achieve more distortion. For me, the quintessential Plexi sound is a JMT45 turned up to 10, as heard from Clapton on the “Beano” album.

What is the Marshall sound?

Their signature sound, characterized by sizzling distortion and "crunch," was conceived by Marshall after guitarists, such as Pete Townshend, visited Marshall's drum shop complaining that the guitar amplifiers then on the market didn't have the right sound or enough volume.

What is a Plexi amplifier?

Although Marshall has never released an amplifier under the 'Plexi' moniker, the term is still used to refer to amps from the latter half of the 60s that featured Plexiglas panels (notably the Super Lead model 1959).

What does a Plexi pedal do?

The pedal that started the Plexi trend is still in production and hand-built. It serves up medium-high gain sounds via 2 footswitchable channels and an exta 20dB of clean boost controlled by a knob. There is a single gain knob for the crunch and high-gain channels, and they share tone and output volume controls.

Who uses a Marshall Plexi?

Besides Pete Townshend of The Who, early users include Eric Clapton, who in 1966, when he founded Cream, traded in his famous Bluesbreaker combo for a 1959 Plexi, and Jimi Hendrix, who used a 1959 with four 4×12″ cabinets (his "couple of great refrigerators") at the 1969 Woodstock Festival and established the Marshall ...

This Amp Forever Changed Music...What Is The Plexi Sound?

Why is a Marshall called a Plexi?

The name originates from its shiny, Plexiglas panel, commonly used on Marshall amps between 1965-1969. Although many amps are referred to as 'Plexi's' The 100 Watt Super Lead (model number 1959) is most commonly associated with the name.

What tubes are in a Marshall Plexi?

Preamp tubes: three ECC83 (12AX7) for first gain stage, cathode-follower tone stack, and “long-tailed pair” phase inverter. Output tubes: initially two EL34; Class AB, fixed bias.

Who used Marshall jtm45?

The JTM 45 became the basis for many subsequent Marshalls, most notably the Marshall 1962 combo (later referred to as the "Bluesbreaker" due to its use by Eric Clapton with John Mayall's Bluesbreakers).

What is an amp in a box pedal?

In more recent years, said family has both welcomed and embraced a new member: a fast-growing subset dubbed by many as “amp in a box” pedals. As the name suggests, such pedals don't just add distortion to your sound; they strive to emulate the sound of an iconic combo, head, or stack via the clean channel of your amp.

Where are Joyo pedals made?

Manufactured and based in China, they have their own acoustic core technology in the pipeline for utility patents. Joyo are not just any cheap replicas.

What does Plexi mean in plexiglass?

Plexi is a type of transparent acrylic. It is often used in place of glass. We use plexi /acrylic because of the superior results it gives when we print to this medium.

What is a Marshall Super Lead?

The SuperLead is a two-channel amplifier design that incorporates four inputs. All four inputs can be used simultaneously if one desires and channels can be linked or patched together to explore different sounds. One Volume control is offered per channel.

Does Marshall make a bass amp?

Make your bass boom with this 400W, all valve bass amplifier. The VBA400 has everything you need to perform with confidence, keeping you in tune and full of tone throughout a show. Now guitarists aren't the only ones who can enjoy that classic Marshall sound.

Why do Marshall amps sound so good?

Marshall Amps

There are a couple of other sonic qualities that Marshalls are known for. This includes the fizzy yet crisp highs that they produce, as well as their tendency to compress when cranked up loud. Crunch tones aside, some players also like Marshall amps because of their cleans.

Why is Marshall speaker so popular?

Marshall speakers are good on sound quality, but they aren't quite full-fledged wireless speakers. Marshall is known for its high-end speakers and amplifiers especially by those in the music business. You've seen them at concerts too, but the brand is planning to go mass market, tapping the high-end speaker business.

What amp did Kurt Cobain use?

Apparently Cobain's preferred amp was a 1960s Fender Twin Reverb, which he used to record In Utero, as well as MTV Unplugged. He also used a similar amp during the recording of Bleach, though it is unknown if it was the exact same one. He also favoured a Mesa/Boogie Studio .

Where are Victory amps made?

Our Story. Victory Amplifiers are born in England, where they are proudly designed and built by our committed team of engineers and craftspeople.

Where Are Mad Professor pedals made?

Since 2002, Mad Professor has been designing and manufacturing pedals from its Finland headquarter. It has progressed rapidly from its humble beginnings and has grown to be a well-established firm in an extremely competitive field.

How does an amp in a box work?

An amp in a box (AIAB) as its name suggests it's an effects pedal that emulates the pre-amp section of an actual amp (it is usually modeled after famous ones) and provides you with an easy and portable solution for not having to carry your big amp or cabinet to every rehearsal or gig.

Is a Marshall JTM45 a plexi?

Marshall JTM45 2245 30-watt Plexi Tube Head.

Did Hendrix use a JTM45?

In addition, the nature of the components suggests that this was likely to be one of the first Marshall amps that Hendrix ever owned and could have been one of three Marshall amps purchased by the Jimi Hendrix Experience on 11 October, 1966. Jimi Hendrix's Marshall JTM45/100. Photo source: Christie's.

What kind of amp did Peter Green use?

That's the case with this month's featured amp: a 1964 Marshall JTM45 4x10 combo that was owned and played by Peter Green during his years with Fleetwood Mac, and potentially with John Mayall's Bluesbreakers.

How long do Marshall tubes last?

The only thing that matters is how many operating hours it has put in, and not how many years have passed since it what was made. You can expect a conventional amplifier tube to have a service life ranging up to 10,000 hours. Tubes with military specifications are built to last up to 100,000 hours.

How long do Marshall amps last?

You should replace them every 10 or 20 years, and there is a high chance that your amp will sound as good as new. What is this? Of course, if there are no issues with your amp or the sound, then you should not change a thing.

What is the difference between EL34 and EL84?

In general, EL34 and 6L6 tubes are typically used in higher wattage applications, usually amps that are over 50 watts. EL84 tubes are used for lower wattage amps, typically in the 15 to 30 watt range, but have essentially the same sonic “flavor” as EL34 tubes.