What is grind on a wedge?

“Grind is the manipulation of removal of material from the sole of your golf club to improve it visually behind the ball and more so to improve contact with the turf.” Once you move a wedge from its normal address position in most occasions, opening the blade presents more bounce, closing it down less bounce.
Takedown request   |   View complete answer on peterfieldgolf.co.uk


What does the grind on a wedge mean?

In layman's terms, the “grind” on your wedge is the geometry of the sole, which can be manipulated by removing (grinding off) material from the heel, toe, trailing edge and leading edge to perfect how the club interacts with the turf.
Takedown request   |   View complete answer on golf.com


What wedge grind is most forgiving?

K-Grind. The highest bounce wedge in the lineup, the K Grind is the ultimate bunker club and the most forgiving wedge in the lineup for all shots.
Takedown request   |   View complete answer on spargogolf.com


Does wedge grind matter?

What you do need to know about wedge sole grinds is that they can make a huge difference in how a wedge performs in different turf conditions for different types of swings.
Takedown request   |   View complete answer on golf.com


What is the difference between C grind and S grind?

The C Grind has less bounce so suited to firmer course conditions and there's increased relief on the heel making it easier to play shots with the face open. The S Grind has a medium width sole with slight camber at the back and moderate heel relief to keep the leading edge low through impact.
Takedown request   |   View complete answer on nationalclubgolfer.com


What Sole Grind and Bounce is Right For You?



What is the best bounce for a 56 degree wedge?

The best bounce for a 56 degree wedge for most golfer is about 12 degrees. This is a versatile number right in between the low end of 8 degrees and the high end of 14 degrees. You can play most courses with a 12 degree bounce sand wedge and enjoy your golf.
Takedown request   |   View complete answer on golfsidekick.com


What degree wedge is best for chipping?

What degree wedge is best for chipping? For most golfers, a gap wedge or a sand wedge with loft of between 52° and 56° will produce the most consistent outcome when chipping. This is because you'll be able to play most short-game shots you're likely to come across out on the course.
Takedown request   |   View complete answer on golfmonthly.com


What wedge is best for sand?

Best Sand Wedges Reviewed
  • Cleveland RTX Zip Core Sand Wedge.
  • Titleist Vokey SM8 Wedge Sand Wedge.
  • Callaway MD5 JAWS Sand Wedge.
  • Taylormade MG2 Sand Wedge.
  • Ben Hogan Equalizer II Sand Wedge. Best Value.
  • Conclusion.
Takedown request   |   View complete answer on golfergeeks.com


What 3 wedges should I carry?

Know your pitching wedge loft.

If it's 45 degrees or less, add three more wedges that are spaced apart by no more than 4-5 degrees each. So generally think about putting in a gap wedge that's 48 or 50 degrees, a sand wedge that's between 54 and 56 degrees, and a lob wedge that's between 58 and 60 degrees.
Takedown request   |   View complete answer on golfdigest.com


What is the easiest wedge to hit?

The easiest wedges to hit are cavity-back wedges like the Cleveland CBX 2 and the Callaway Mack Daddy CB. This style of wedge makes it easier for players to get the ball up in the air quickly, even without making perfect contact.
Takedown request   |   View complete answer on toprankgolf.com


What is the easiest wedge to chip with?

The sand wedge is the wedge that is the best for chipping. With a sand wedge, you can fly the ball reasonably close to the pin, and expect it only to roll a few feet. Sand wedges are great out of the bunker, and they provide a ton of spin even on shots out of the rough.
Takedown request   |   View complete answer on golfcartreport.com


What is the easiest sand wedge to hit?

“For beginners having a hard time getting the ball out of the sand, the C3i Wedge is the easiest sand wedge to use with its widest sole that can get the ball into the air quickly and deep face that offers quality contact.”
Takedown request   |   View complete answer on golfinfluence.com


What bounce and grind do I need?

Low bounce wedges are great for firm conditions and players that take very little divot. A low bounce wedge will tend to dig or cut into the turf. High bounce wedges are great for softer conditions and players that take a bigger divot. A high bounce wedge will tend to glide through the turf and resist digging.
Takedown request   |   View complete answer on vokey.com


What bounce is best for wedges?

Wedges with a mid bounce angle (10 to 14-degrees) are the best all-around wedges for playability in all types of conditions and all golfers.
Takedown request   |   View complete answer on golfbidder.co.uk


Which wedge to use around the green?

For the average golfer, chipping with a pitching or gap wedge will produce the most consistent shots around the green. Using a gap wedge will be the best place to start for standard chips, but a pitching wedge could work better if the ball is sitting up in the rough.
Takedown request   |   View complete answer on outofboundsgolf.com


Does a beginner need a sand wedge?

As well as a club that offers sufficient loft to get out of greenside bunkers and optimize your precision on chip shots. Therefore, the top two wedges that a beginner should carry in their bags are pitching and a sand wedge.
Takedown request   |   View complete answer on golfworkoutprogram.com


What club should I chip with?

For a basic chip, use a 52- to 56-degree wedge. Play the ball center, and get your weight forward so your left shoulder is over your left foot.
Takedown request   |   View complete answer on golfdigest.com


What is the rule of 12 in golf chipping?

The Rule of 12 In Golf Chipping. The rule of 12 is a golf chipping technique that explains the exact relationship between the loft on a golf club and the amount of roll you will get on a chip shot. We use 12 yards as the total distance we want the ball to carry on the chip.
Takedown request   |   View complete answer on aecinfo.org


How far should you hit a 60 degree wedge?

How Far Should You Hit A 60 Degree Wedge? On average, golfers hit their 60-degree wedge 74 yards, but the range can vary between 60 and 100 yards. Longer hitters who take a full swing will typically be close to the 100-yard range but most golfers only take a 1/2 or 3/4 swing with their 60 degrees.
Takedown request   |   View complete answer on outofboundsgolf.com


What wedges does Tiger Woods use?

He previously employed TaylorMade's MG2 TW Grind wedges in 56 and 60 degrees, but has since switched into the new MG3 TW Grind wedges. The MG3 wedges, which hit retail last year, are designed with new micro-ribs between the grooves to add friction, and a higher center of gravity for better flight control.
Takedown request   |   View complete answer on pgatour.com


What is S grind?

The S Grind is geared towards golfers that will strike wedge shots with a square club face. It's built for those who aren't manipulating the face or angle of attack too much. Perfect for pretty much all turf conditions. The S Grind is available in 54, 56, 58, and 60 degree options - all with 10 degrees of bounce.
Takedown request   |   View complete answer on dallasgolf.com


Is 12 degrees of bounce too much?

Clubs with a bounce of more than 10 degrees are considered "high bounce" wedges, according to Publinks Golfer. Sand wedges and some specialty gap wedges usually have high bounce, making them a good choice for light sand, deep rough or a shaggy fairway.
Takedown request   |   View complete answer on golftips.golfweek.usatoday.com


Do I need both pitching wedge and sand wedge?

Most golfers agree that a sand wedge is essential in your bag. As your experience and skills grow you can look at other wedges but to start with one should have at least a pitching wedge and a sand wedge.
Takedown request   |   View complete answer on golfspan.com
Previous question
What is the yellow stuff in lobster?