What is DPC full form?

The full form of “DPC” is “Damp Proof Course“, where “D” stands for “Damp“, “P” stands for “Proof” and “C” stands for “Course”.

What is the purpose of DPC?

A damp proof course is commonly abbreviated as the DPC. It is a barrier or obstruction that is primarily designed to prevent the moisture rising by the capillary action. The capillary action through which the moisture rises is known as the rising damp.

How is DPC calculated?

quantity calculation of concrete for DPC of 50 square metre area. For the calculation of dry volume 33% volume is increased so we should multiply cofactor 1.33 in wet volume.

What is DPC unit?

Damp proof course: Unit of measurement is sq. m and unit of m² payment is also sq. m.

Is DPC waterproof?

DPCS are a layer of waterproof material in the wall of a building near the ground, to prevent rising damp. DPCS help to prevent excess moisture entering the building which in turn prevents serious structural damage and issue such as wet rot, dry rot, timber decay, rising damp and black mould.

What is DPC? Benefits of DPC? | DPC

What is thickness of DPC?

DPC is made up of cement concrete of mix 1:2:4 (1-cement: 2-coarse sand: 4-12.5mm stone aggregate) mixed with a good quality waterproofing compound. The waterproofing compound should be mixed as per the manufacturer’s instructions. The DPC should be of 40mm thickness and should be of uniform thickness.

What is DPC size?

It is supplied in 30m length rolls and the following widths: 100mm, 112.5mm, 150mm, 225mm, 300mm, 337.5mm, 450mm, 600mm, 900mm and 1200mm.

What are the 3 types of DPC?

What is DPC material?

Damp proof course (DPC) is a barrier of impervious material built into a wall or pier to prevent moisture from moving to any part of the building.

What is the ratio of DPC?

Damp Proof Course or DPC is the protective layer applied to prevent the rising of moisture to the walls from the ground due to capillary action. It is usually 2.5 cm thick with a ratio of rich cement concrete 1:1.5:3 or 2 cm thick with cement mortar 1:2 mixed with standard waterproofing material.

How do I install a DPC?

Lay the DPC on a full even bed of fresh mortar in one continuous length, for the full width of the leaf. Provide at least a 100mm overlap at any joint or corners. The DPC must not obstruct the cavity. Ensure the external edge of the DPC is visible and not bridged by mortar when completing pointing of the mortar joint.

What is DPC in water bill?

Delayed Payment Charges (DPC) is required to be levied on consumers at 18 per cent per annum for delays in payments of water bills. As each billing cycle is of a two month period, DPC at 3 per cent per cycle is to be charged.

What is DPC floor?

A Damp Proof Course (DPC) is a horizontal barrier that is inserted into the wall to stop any moisture from rising up through the structure by something known as capillary action.

Which bitumen is used for DPC?

Bituminous felts (6 mm thick sheet or asphaltic felt)

This is also a flexible material, which is available in rolls of normal wall widths. For placing this in position, first a layer of cement mortar is laid on the brickwork and then DPC is bedded on it.

Is DPC used in RCC structure?

Provision of R.C.C.

5. at least 3 layers of bitumen felts are used as DPC. Horizontal and vertical DPC treatment is also provided there. The outer surface of the RCC wall slab is protected by a half brick thick outer wall.

What is DPM in building?

A damp proof membrane (DPM) is a type of membrane material is used to prevent dampness from occurring through capillary action. It is often used underneath a concrete floor to stop it from gaining moisture.

What is the difference between DPC and DPM?

DPC stands for damp proof course whilst DPM stands for damp proof membrane. A DPC is a material placed between courses of brickwork to stop the rise of water up the walls. The types of products used can include polythene materials, pitch polymer combinations or even materials such as slate.

Where is DPC placed?

A damp-proof course is a barrier, usually formed by a membrane built into the walls of a property, typically 150 mm above ground level, to prevent damp rising through the walls.

Where is DPC needed?

Damp Proofing Floor Regulations:

DPC may also be needed: In masonry walls below a coping, if the coping is not waterproof. In joints between walls, doors, and window frames. In suspended timber ground floors, between the timber and any materials that are porous/can carry water.

Can DPC be above floor level?

Unlike timber suspended floors where the damp proof course will be sited below floor level with solid constructed floors the DPC should always be sited above finished floor level and should be visible.

What is plinth level?

plinth level means the level of the floor of a building immediately above the surrounding ground.

Is DPC necessary?

The reason why a damp proof course is important is because any excess moisture entering a building can lead to more serious property problems such as timber decay or structural damage. Properties that do not have an effective damp proof course are more prone to suffer from the following: Wet rot. Dry rot.

What is DPC and its types?

What is DPC? The damp proof course (DPC) is generally applied at basement levels, which restricts the movement of moisture through walls and floors. The selection of materials for the damp proof course and its various methods of applications in buildings is discussed.

What is DPC charges in Iifl?

DP charges levied by the IIFL are used while an account holder sells any kind of stocks, shares, bonds, etc. to the other party. Therefore, IIFL charges ₹ 20 per debit instruction (irrespective of quantity) on all of its demat account holders.