What is blue wood?

BluWood is a treated wood used in the framing of residential or commercial buildings. According to the BluWood website, they “provide the building industry with a new level of defense.

Is blue wood poisonous?

This eco-friendly treated lumber combines a boron-based preservative with water repellent to keep moisture, mold, rot, and termites at bay. Intended primarily for use as above ground framing, BluWood is more environmentally friendly and less toxic.

Is Blue wood natural?

It comes from Talipariti elatum, the so-called “Blue Mahoe” tree, which is native to the Caribbean and is, apparently, the national tree of Jamaica. Turns out it also grows very quickly and shows some promise for sustainable forestry. Lumber is available through Tropic Ventures.

Can you get blue wood in the US?

Perched high atop the Blue Mountains in southeast Washington, Ski Bluewood occupies the second-highest base elevation in the state (4,450 feet). The Blue Mountains rise out of a high-desert region, which provides clear skies and cold, smoke powder which brings an average annual snowfall of over 300 inches.

Can you buy blue wood?

Just about any species of wood can be special-ordered from the lumberyard with a Bluwood sealant. The treatment adds about 20 percent to the cost, but the wood will be guaranteed for the life of the house. And if blue's not your color, just remember, it gets covered by the drywall. Visit Bluwood for dealers.

Lumber Tycoon 2 - BLUE WOOD - 2022 June 29

What is pink wood for?

A couple of blog entries ago, I wrote about how Mike Holmes is endorsing PinkWood, a building product that is coated with a special non-toxic coating that not only protects it from moisture and mold, but also endothermically reacts to heat making it fire resistant. Pretty neat stuff.

What is the hardest wood in the world?

1. Australian Buloke – 5,060 IBF. An ironwood tree that is native to Australia, this wood comes from a species of tree occurring across most of Eastern and Southern Australia. Known as the hardest wood in the world, this particular type has a Janka hardness of 5,060 lbf.

Why is some wood stained blue?

Blue stain is caused by fungi that grow in sapwood and use parts of it for their food. It is not a stage of decay, although the conditions that favor blue staining also very often lead to infectionwith decay-producing fungi. Excepting toughness, blue stain has little effect on the strength of wood.

What is Purple Heart wood?

DESCRIPTION. Purpleheart heartwood is a deep purple-violet when freshly cut, maturing to a dark brown. The original color is restored when re-cut. Grain is straight, but often irregular, wavy and sometimes interlocked. Texture is moderate to fine.

What kind of wood is blue on the inside?

Blue Mahoe is one of very few woods with an overall gray heartwood appearance (in its fresh and unweathered state), and perhaps the only commercially available wood that can exhibit a bluish hue.

Why not use pressure treated wood indoors?

Never use recycled pressure treated lumber indoors. There's a good chance it was treated with CCA, which means it contains arsenic. If you're going to leave the pressure treated wood exposed, perhaps as a post or an exposed rafter, plan on painting or finishing it.

Is blue wood termite resistant?

BluWood components are protected against the devastating consequences to wood of fungal and termite infestation. Before you build, make sure to ask about the use of BluWood for all framing lumber, trusses and sheathing components.

Why are some 2x4 blue?

The other coated lumber Mike uses on his shows is Bluwood (an American product) which is coated with a distinctive blue coating that is mold, moisture, and insect resistant. Bluwood resists rot and termite damage, so in a damp climate or a basement, Bluwood is the way to go.

What is blue wood used for in construction?

BluWood is a treated wood used in the framing of residential or commercial buildings. According to the BluWood website, they “provide the building industry with a new level of defense.

Is Blue Pine good for furniture?

Yes, blue goes very nicely with pine furniture and evens out the warm tones found in pine wood. Light blue, dark blue, and even mixes of blue-green like turquoise are great options! You're probably wondering what shades of blue work best with pine furniture.

Is Blue Pine a hardwood?

Care must be taken when sanding because it is a soft wood, and be sure to wear a dust mask. I frequently use blue pine in intarsia. There are many variations in the coloring, from slight gray streaking to solid gray.

What is blue stain pine?

Blue Stain Pine (also called Beetle Kill Pine) comes from multiple species of Pine and can also include species of Spruce and Alpine fir. It typically is a light-colored softwood, with nearly-white to pale yellow coloring and distinctive areas of blue-gray color ranging from a light gray to a deep blue-black.

Where does purple heart wood come from?

Peltogyne, commonly known as purpleheart, violet wood, amaranth and other local names (often referencing the colour of the wood) is a genus of 23 species of flowering plants in the family Fabaceae; native to tropical rainforests of Central and South America; from Guerrero, Mexico, through Central America, and as far as ...

What is the softest wood?

Balsa wood: the lightweight among the wood species

With a density of 0.1 to 0.2 g / cm³, balsa is the softest wood in the world.

What wood is harder than oak?

Maple is harder than oak.

Harder woods can be susceptible to decay, while softer wood resists it. Where you use the hardwood is more important than its density and hardness. Differing sub-species of each variety also play an important role when considering the choices between oak and maple.

What are purple studs?

During the post-World War II housing boom, a company called Temple-Inland introduced the now infamous purple 2×4 studs as a marketing tactic to compete against Douglas fir studs from the Pacific Northwest.

Why are 2x4 studs pink?

A: They are colored because they are "pre-cut" studs and are easily seen on jobsites so they aren't mistaken for unmitered standard length lumber. These are measured and mitered (squared) at the sawmill and sold for various height interior walls. Makes building walls much quicker during framing.

Why are some 2x4 green?

Green does not refer to any hue or coloring. In fact, lumber at its basic form is considered green lumber. It's milled to a certain dimension, finished to an extent (e.g. eased edges, rough face, smooth on all sides) and then shipped out for consumers to purchase. Moisture content is usually pretty high.