What is blood spill kit?

A blood spill kit is a kit used for cleaning and disinfecting sites where blood has been spilled. Blood spill kits may also include biohazard containers for safe disposal of sharps, blood, or body fluid related contaminants.

What are blood spill kits used for?

The Kendall™ spill kit for blood and body fluids is designed to facilitate fast and safe clean-up of blood and body fluid spills. It complies with OSHA's rule for occupational exposure to bloodborne pathogens and can be used in numerous occupations. Latex-free.

What is blood spill?

Blood spillage may occur because a laboratory sample breaks in the phlebotomy area or during transportation, or because there is excessive bleeding during the procedure. In this situation, clean up the spillage and record the incident, using the following procedure.

What means spill kit?

A spill kit is an all-in-one container which stores gear and equipment used for cleaning up hazardous material spills. Typical contents inside a spill kit are PPE, sorbents and other clean-up supplies.

What are the 2 main types of spill kits?

Guest Medical Biohazard Spill Kit Training Presentation

What materials are in a spill kit?

What PPE is required for a blood spill?

Small spill such as a small pool of blood that has a risk of splashing: PPE requirements at a minimum include water- proof gloves (rubber, nitrile, etc.) and mucous membrane protection with goggles and dusk mask.

Where is the blood spill kit kept?

Spill kits should be stored as close to the area where the liquid(s) the kit is designed to clean up are kept. As an example, a medical facility should store bloodborne spill kits in the lab that tests blood.

What is a spill kit used for in healthcare?

Lab and healthcare spill kits have been designed specifically for the health care industry and for any liquids that may be commonly spilled in laboratories or medical facilities. Such spills in the healthcare industry include (among other liquids) biohazard spills, body fluids, cytotoxic spills or mercury spills.

What are the types of spill?

How do you manage blood spills?

Spots or drops of blood or other small spills (up to 10 cm) can easily be managed by wiping the area immediately with paper towels, and then cleaning with warm water and detergent, followed by rinsing and drying the area. Dry the area, as wet areas attract contaminants.

What are the 5 steps to safely manage a blood and body fluid spillage?

Absorb the spill using paper towels. Remove paper towels and discard into clinical waste bag. Disinfect area using prepared Haz Tab 1,000 ppm/Peracide • Discard the mop into clinical waste bag. Clean the area with neutral detergent and water.

What is the 3 step procedure for cleaning up a blood spill?

Procedure for Spills on Hard, non-porous surfaces: Cleanup and decontamination is a 3 step process requiring proper personal protection equipment, removal of gross filth (visible material), followed by disinfection of surface.

What is spill management in hospital?

In a hospital, hazardous substances such as body fluids, drugs, cleaning fluids and other chemicals are in very close proximity to hundreds of people each day. Thus in hospital spillage of blood, body fluids or chemicals can occur at any time due to broken or faulty equipment or human error.

What is the first step in cleaning up blood spill?

The first step when cleaning up a blood spill is to put on the proper safety equipment, including disposable gloves, goggles, boots, and a lab coat. Cover the spill with absorbent towels and spray enough commercial-grade disinfectant so that it soaks through the towels. Wait 10 minutes for the disinfectant to settle.

When should a blood spill be cleaned?

If blood or PIM has come into contact with any of the mucous membranes (eyes, nose, lips) they need to be thoroughly rinsed (at least 10 minutes of running water). If there is contact with open wounds or cracks in the skin, there is a risk of exposure. Immediately and thoroughly wash with soap and water.

What is the first thing you should do if a spillage occurs?

Immediately notify others working in the area and any supervisory personnel of the hazard, and if the situation warrants it, evacuate the area. If needed, call 911 or follow the established emergency procedures to call for help.

How do you clean up a blood spill OSHA?

Response: OSHA's Bloodborne pathogens standard at 29 CFR 1910.1030 requires that items and surfaces contaminated with blood or other potentially infectious materials (OPIM) be decontaminated with an appropriate disinfectant.

What colour is a chemical spill kit?

Spill kits are available in 3 main types, Oil, Chemical and Maintenance. They are identified by difference colours as per the BS:7959-3:2000 guideline. Blue for oil, yellow for chemical and grey for maintenance. The principal reason for colour coding is for identifying the type of hazard you are dealing with.

What are yellow spill pads used for?

Hazmat spills – yellow socks

Yellow indicates the chemical spill absorbent sock is for aggressive and non-aggressive fluids. Although yellow socks are typically for acids and bases, you can also use them with unknown liquids.

What are two main types of spill kits and how are they used?

It may be that you need two types of spill kits. General purpose spill kits are colour-coded blue and contain grey absorbents. They are ideal for all liquid spills, with the exception of aggressive acids or bases. Hydrocarbon spill kits are colour-coded yellow and contain white absorbents.

What colour is oil spill?

For oil slicks thicker than 50μm the true oil colour will gradually dominate the observed colour. Brown oils will appear brown, black oils will appear black. The broken or discontinuous nature of the colour is due to thinner and thicker areas within the slick.

How do you clean up blood spills in a hospital CDC?

Confine the spill and wipe it up immediately with absorbent (paper) towels, cloths, or absorbent granules (if available) that are spread over the spill to solidify the blood or body fluid (all should then be disposed as infectious waste). Clean thoroughly, using neutral detergent and warm water solution.