What is best material for subfloor?

Plywood. Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

What material makes the best subfloor?

Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.

What is the most durable subfloor?

Best for Durability and Maintenance: Plywood

As subfloor materials, both plywood and OSB should last as long as the house itself if the subfloor has been properly installed.

Is it better to use OSB or plywood for subfloor?

OSB has a lower resale value than plywood due to its lower strength. For this reason, few homeowners prefer OSB in their homes. Apart from costs, plywood is superior in all the other areas, such as the strength of the structure. For this reason, it's a superior material for use on the subfloor.

What thickness of subfloor should I use?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch.

Plywood Vs. OSB - Subfloor Comparison

Do you nail or screw subfloor?

Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.

Is OSB good for subfloor?

Some builders prefer OSB over plywood for flooring because the surface, when new, is always clean, flat, and knot-free. Since OSB is so dense, it's a good soundproofing product. OSB is a more consistent product than plywood or other types of material for subfloor: every sheet is the same.

What wood should I use for subfloor?

Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Is MDF good for subfloor?

Modern density fiber (MDF) is an excellent choice for your underlayment since it's cost-effective and easy to work with. You can use MDF as underlayment but it is best used in areas not prone to moisture. MDF sheets of 18-22mm are a high-density material that provides a consistent finish and resistance.

Which is more water resistant OSB or plywood?

Plywood is porous and is susceptible to damage when exposed to water for longer time. OSB is not water resistant and hence cannot be used for exterior projects.

Is pine plywood good for subfloor?

Yes, you can use pine subfloors as primary flooring. In many older houses, the pine subfloor was the only floor and it held up well. Uncovered pine subflooring appeals to recycling enthusiasts as well as fans of distressed wood.

Is OSB cheaper than plywood?

OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.

What's the difference between subfloor and plywood?

OSB absorbs less moisture, but plywood dries out faster and more completely. How the subfloor materials react to water matters during both an open-air construction phase of a house as well as homeownership when a leak or flood might compromise the subfloor.

How many layers of plywood do you need for a subfloor?

If you are using plywood for your subfloor, you should use a minimum of one layer that is between ¾” and ⅝” thick. This thickness will suffice for most floors; however, codes will vary and a second layer is a good idea if your floor covering is going to be a heavy material like ceramic tiles or natural stone.

What is the difference between subfloor and underlayment?

Basically, subfloors are a structural part of your home that provide strength and rigidity to your home's flooring. Underlays, on the other hand, protect your floor covering from moisture, help soundproof your floor, and offer cushioning and comfort underfoot. You can think of your floor like a sandwich cookie.

Can I use 7/16 OSB for subfloor?

Oriented strand board, or OSB, is a wood structural panel that can also be used for flooring. It is made from shredded strands of wood pressed together with wax and a special adhesive, then hot pressed into a panel with up to 50 layers of strands. OSB can be used for subfloors, although it is not as common as CDX.

What is stronger MDF or OSB?

OSB is considered to be stronger than MDF. OSB is suitable for structural projects and withstands water, moisture, and weather conditions better than MDF. However, MDF is more versatile and easy to work with than OSB and preferred for projects requiring a smooth finish.

What can I use for subfloor Besides plywood?

Common Subfloor Materials. There are four primary materials used as subfloor: plywood, oriented strand board (OSB), concrete, and high-performance panels.

Which is stronger OSB or particle board?

Because of the three-layer crisscross structure, OSB board is more uniform than the general particle board, has good toughness, strong nail holding power, and is not easy to expand due to moisture.

What is the difference between plywood and OSB?

Plywood is made of many layers of very thin wood, called plys, pressed together with glue. It may be given a veneer ² top of hardwood, while the inner layers are typically made of softwood. OSB is made of many smaller pieces of hardwood and softwood mixed together in strands.

How thick should OSB subfloor be?

For decades, 23/32″-thick OSB has been the most commonly used thickness of OSB subflooring. But a simple switch to 7/8″ panels offers several advantages for accommodating a home's energy efficiency and for ensuring the performance of finish materials and the overall feel of the floor.

Do you need tongue-and-groove for subfloor?

For subflooring, you use tongue and groove plywood. The tongue and groove are only along the 8 foot edges. On the four foot edges, your seams will fall on joist tops, so no need for tongue and groove. But to start off, we will need to remove the tongue so the plywood is tight with the exterior ICF walls.

Can you install vinyl plank on OSB?

Yes, provided it meets the specifications required for subfloor preparation. Bear in mind that plywood and OSB substrates tend to get 'roughed up' during construction, and any imperfections in the surface will eventually telegraph through to the surface of the floor.

How do I protect my subfloor from moisture?

Is it OK if OSB gets wet?

Your framing lumber and the oriented strand board (OSB) are going to be fine. The glues used to make OSB are water-resistant because the manufacturers know that virtually no one can build a home that won't get wet before the roof and siding is applied.