What is baffle filter?

Baffle filters are constructed by interlocking baffles with a tortuous route, through which the grease passes. The oil particles follow down the smooth surface of the filter's vanes and collect within the canopy holding casings. This limits the chance of build-ups that will prevent the airflow.

Is baffle filter good?

With all the filters, the baffle filter offers the best results. It needs very little maintenance than mesh and charcoal filters, making it the best choice for an Indian kitchen. The only drawback is that the Baffle Filter is the most expensive option.

What is the difference between filterless and baffle filter?

To know why, read on! Reason 1: For any Chimney where the filter is in a horizontal position (from 0°-45° approx, like the chimney above), Baffle Filter Chimneys are always better than Filterless Chimneys. The job of the filter is to block the heavy oil particles from entering the chimney and getting stuck inside it.

Is mesh or baffle filter better?

Mesh filters are more effective at capturing finer airborne pollutants, while their light material construction mean that they typically perform quieter.

What does a baffle filter look like?

Baffle filters are usually made from aluminium or stainless steel. They are about two inches thick and contain two roll formed baffles, which are spaced equally apart. The spacing built into the baffle filter makes for optimised air flow, which helps to capture grease inside of the filter.

What's the difference between baffles and mesh filters?

Which filter is best for chimney?

Most of the Indian chimneys have baffle filters. This is in fact, an improvement on the aluminium wire mesh filters. Research says that these filters are about 30% better than the mesh filters.

What is filterless chimney?

What is a filterless chimney? Traditional chimneys have filters that need to be removed and cleaned frequently. However, modern filterless chimneys like ours do not have filters which means they are easy to clean and maintain. Our chimneys come with two technologies – Auto clean technology and i-Auto clean technology.

What is a stainless steel baffle filter?

Stainless steel baffle filters are one of the most efficient filters on the market. What makes them so efficient? These grease filters are manufactured with alternating three-sided baffles that maximize the airflow and grease filtering while your hood is running.

Which chimney is best for 3 burner stove?

The most commonly available sizes of chimneys are 60 cm and 90 cm. If you have a stove with two burners or less you can go for a 60 cm chimney. But if your stove has 3 burners or more you should opt for a 90 cm chimney.

Which chimney is better autoclean or manual?

Simply put, an auto-clean kitchen chimney is better than a manual one. Ultimately, the auto-clean option saves time, is more reliable, and will last longer with less maintenance.

Which brand chimney is best?

Which chimney is best under 10000?

Which chimney is better Faber or Kutchina?

Kutchina is good but I will go for Faber. I had bitter experience with Kutchina company products after-sales service. Their ASS people are not atall trained and they just recruit unemployed youths and show them how to service the products. One of my relatives Chimney developed problems after servicing.

How long do baffle filters last?

I recommend that homeowners regularly clean their baffle filters such as once every two months. If you cook heavily as well as fry a lot of foods, you may want to even clean your baffle filters more often---but every two months is a good practice.

Do baffle filters need to be replaced?

You don't need to replace filters on a ducted cooker hood. In fact, ducted hoods do not have charcoal filters. The most popular filters for ducted hoods are stainless steel baffle or mesh. Clean them every month or so depending on how often you cook.

Which chemical is used to clean chimney?

Caustic soda or Sodium Hydroxide is a great cleaning agent but is it dangerous too and hence should be used carefully. Put the chimney filters in a tray and sprinkle caustic soda over it. Be careful to not touch caustic soda with your bare hands, it might cause chemical burns.

What is the easiest way to clean a chimney?

Pour two cups of vinegar over it and sprinkle 2 to 3 tablespoons of baking soda and salt on them. Fill a tub with hot water and let the filters sit in the solution for 2 hours. Rinse them with clean water and wipe them clean afterward.

How do I get sticky oil off my chimney?

All you have to do is make a thick paste of two tablespoons of baking soda by adding a little amount of water. Apply this paste over the surface and allow it to stay there for 5-10 minutes. Clean it off with a wet cloth to remove the grease.

Is Faber an Indian brand?

Faber is an Italian kitchen hood manufacturer founded in 1955 by Professor Abramo Galassi who since then has always held the post of chairman of the board. In 1963 Faber produced the first extraction hood in Europe.

How much electricity does chimney consume?

When you are using the chimney, auto clean will not run at that time which excludes 100 to 150 watt in case of dry auto clean. So on an average the chimney consumes only 120 to 200 watts while running.

Is Elica good brand?

Elica (Brand Overview)

It is a well-known name in the field of Kitchen goods all over the world and is one of the top choices among Indian consumers as well. Due to its wide range of features, unique designs, and high-quality products, Elicia became one of the most trusted chimney brands in India almost immediately.

Which pipe is best for chimney?

Stainless steel is the most preferred material for the chimney duct pipes because of its strength, durability and resistance to corrosion. Materials like PVC and aluminium are also used for the chimney ducts.