What is a Yankee jib?

A jib, also known as a jib skirt or jib sail, and actually better known as a yankee, is a type of genoa

genoa

A genoa sail is a type of large jib or staysail that extends past the mast and so overlaps the main sail when viewed from the side, sometimes eliminating it. It was originally called an "overlapping jib" and later a genoa jib. It is used on single-masted sloops and twin-masted boats such as yawls and ketches.

https://en.wikipedia.org › wiki › Genoa_(sail)

Genoa (sail) - Wikipedia

, a headsail on a sailboat. You can think of it as a geuna with a high-cut clew. A jib or yankee is often used in conjunction with a cutter jib, as the cutter jib nicely fills the space of the high clew.

What is a Yankee sail on a boat?

yankee (plural yankees) (nautical) A headsail resembling a genoa or a jib but with a high-cut clew, normally used together with a staysail. A sailing boat is typically equipped with three yankee sails of different sizes, number one being the largest.

What's the purpose of a jib sail?

The jib increases a sailboat's speed simply by adding a significant amount of sail area which catches a lot more wind. It also increases the efficiency of the mainsail (an explanation follows shortly).

What is the difference between a jib and a genoa?

If a headsail is longer than J, it overlaps the mast and is known as a genoa, if it is shorter than J, it's non-overlapping and called a jib. The 'overlap' is the amount that the sail exceeds the J measurement.

What is the difference between staysail and jib?

On a boat with two staysails the inner sail is called the staysail, and the outer (foremost) is called the jib. This combination of two staysails is called a cutter rig (or in North America a yankee pair) and a boat with one mast rigged with two staysails and a mainsail is called a cutter.

What is a Working Jib? Why did we choose this new sail? (Ep.117) Discussion with Precision Sails

What is the difference between jib and yankee?

Difference jib yankee

Our expert Johan explains: "The yankee sits on the forestay, a jib officially sits on a bowsprit (or jib boom). In practice, we often call both sails a jib. In the old days, as many as 2 or 3 rows of jibs were placed on a jib boom to carry more square meters of sail."

Can you sail with just the jib?

Reefing a jib is as simple as pulling out a small flake of sail or shrinking it down to virtually nothing. Sailing on the jib alone can save time, energy and effort and if you've never tried it, you're missing one of sailing's best little sailing hacks.

What are the 3 sails on a boat called?

What is the most efficient sail shape?

A deep or “full” shape is more powerful than a flat shape. Deep sails are best for power and acceleration. A flat sail is best when overpowered in heavy air. A flat shape is also fast in smooth water, as it creates less drag.

What is a Mizzen sail?

A mizzen sail is a small triangular or quadrilateral sail at the stern of a boat. A steadying sail is a mizzen sail on motor vessels such as old-fashioned drifters and navy ships (such as HMS Prince Albert).

Why is a jib called a jib?

From Middle English gibbe (“a swelling or protrusion in the body”), from Old French gibbe and/or Medieval Latin gibba (“hump”).

Can you sail without a jib?

Mark, most sloop rigged boats don't sail to windward very well without a jib, that is under mainsail alone. That being said, if you are sailing with just the main, sure, you can't point very high, but you should still be able to make headway to windward, just with more tacks than usual.

What is pulling up a sail called?

The 'running rigging' refers to all the moveable lines that are used to pull the sails up and adjust them. When the rope raises up the sails, it is then called the halyard, and if it pulls the sail down or out on a mast or boom, it is then called the downhaul.

What is a donkey in sailing?

Steam donkeys acquired their name from their origin in sailing ships, where the "donkey" engine was typically a small secondary engine used to load and unload cargo and raise the larger sails with small crews, or to power pumps.

Why do sailors call left port?

The left side is called 'port' because ships with steerboards or star boards would dock at ports on the opposite side of the steerboard or star. As the right side was the steerboard side or star board side, the left side was the port side.

What is a small jib called?

A very small jib, for example, was called a storm jib. A jib with a high-cut clew might be called a yankee.

What is a lazy sail?

June 15, 2022. If you ever find yourself struggling with hauling down the mainsail, do not reinvent the wheel since people already have sailing lazy jacks! Lazy jacks are simply rigs that are put into your boom and mast to make raising and lowering the mainsail easier in any condition or with limited manpower.

Why is it better to sail at night?

Though some are tempted to switch on the motor once dark falls, sailing in the dark is a really fun and tranquil experience and can improve your sailing skills during the day. Without the ability to see gusts approaching on the water, your sail trim is going to be far more reactive than it might otherwise be.

What is the safest sailboat design?

The biggest safety feature of a catamaran, as mentioned above, is their two hulls. This increased stability makes them perfect for even the most inexperienced sailors.

What is a boat without a keel called?

A boat smaller than 20 feet without a keel is referred to as a dinghy. A dinghy has neither a keel nor a ballast. To resist sideways movement it has a centerboard or a daggerboard that can be lowered or raised as needed.

Why do boats have black sails?

Why? The simple answer is that many sails are now made with carbon fibers—the strongest load-carrying material in sails—and carbon is black.

What is the only rope on a sailboat?

It is a tradition to say that on a boat there is only one rope: the bell rope. On a boat every rope has its name. Thus we speak of a mooring line, a sheet, a halyard, a downhaul, a topping lift... All these precise names are used to clarify a manoeuvre to avoid any ambiguity.

What goes first jib or mainsail?

Main sail goes up first, then the jib. That keeps the boat headed into the wind as you stand away from the mooring. Some sailors leave jib rigged, attached, but not hoisted when on the mooring, or returning to the mooring, and sail with only mainsail. When un-rigging, the jib comes down first then the main.

Can you go faster than the wind in a sail boat?

One of the intriguing aspects of sailing is that a sailing boat can actually sail faster than the wind, given the right conditions. While even a novice sailor soons learns that this is possible, many a very experienced sailor can't really explain the physics of it.

How big of a sailboat can you sail alone?

The few solo cruisers who publish are in much smaller boats, often well under 30 feet. There is an often-repeated “rule” that single sailors should not expect to handle a sail larger than 300 to 400 square feet.