What is a tinny voice?

If you describe a sound as tinny, you mean that it has an irritating, high-pitched quality. He could hear the tinny sound of a radio playing a pop song.
Takedown request   |   View complete answer on collinsdictionary.com


How do you make your voice sound tinny?

If it is tinny, add some eq gain to the vocal track below 500K (approx) and if necessary carve (cut) some room out of the low-end in the dominant bass channels at around the same frequencies. If your vocal is sounding harsh in the high-end you are probably boosting the vocal track to get it to cut through the mix.
Takedown request   |   View complete answer on kvraudio.com


What does a tinny sound sound like?

If something is tinny, it sounds weak and a little metallic. Music played on an old-fashioned transistor radio would sound tinny compared to a fancy new stereo. Tinny sounds are vaguely unpleasant, and tinny objects are poorly constructed, of cheap metal.
Takedown request   |   View complete answer on vocabulary.com


Why do vocals sound tinny?

If you only hear the problem when the vocals interact with the mix, it means that there isn't enough space for the vocals in the mix, and you'd have to clean all the unnecessary frequencies from elements around the vocals. Such elements can be pads, pianos, guitars, etc.
Takedown request   |   View complete answer on wealthysound.com


What is a muddy tone?

One of the most common complaints from people new to mixing is, “my mix sounds muddy.” It's frustrating—muddy sound means a lack of clarity and definition with poor separation between instruments.
Takedown request   |   View complete answer on blog.landr.com


What Does "Muddy", "Boxy",



What is boxy sound?

3. Boxy. A sound or mix composed of mostly midrange frequencies with not enough lows and highs. For example: “These guitars are too boxy, we should try a mic with more high end.” “These guitars are too boxy, we should try a mic with more high end.”
Takedown request   |   View complete answer on blog.landr.com


What makes a sound boxy?

Vocal boxiness is the result of excess energy or resonances between 250-900 Hz. This frequency range also contains the body of your vocal, so it can be difficult to strike a balance between the two. Boxiness is best tackled at the recording stage but can still be remedied in the mix.
Takedown request   |   View complete answer on waves.com


How can I make my voice sound richer?

How to Make Vocals Sound Better
  1. Cleaning Up A Vocal.
  2. Remove Nasal, Plosives, and Esses.
  3. Controlling Vocal Dynamics.
  4. Add Warmth, and Clarity with EQ.
  5. Mildly Distort or Saturate the Vocal.
  6. Try an Exciter with an Air EQ.
  7. Use Short Reverb and Delay.
  8. Use Long Reverb and Delay.
Takedown request   |   View complete answer on sageaudio.com


What causes tinny sound in recording?

This is caused by too much noise-removal. I find that if I use Normalize first, then Noise Removal, it works best. When you use the noise removal feature, remove as little as possible to make the file listenable.
Takedown request   |   View complete answer on forum.librivox.org


How do I fix my thin voice?

How to Fix Thin Vocals
  1. Roll off the Rumble. Before we can beef up the vocals, it's important to clean up the ultra-low end; frequencies below 100hz which can conflict with the tightness of the mix. ...
  2. Boost the Body. ...
  3. Lock it in with compression. ...
  4. Add Harmonics.
Takedown request   |   View complete answer on waves.com


How can I thicken my thin voice?

How to Thicken Your Lead Vocal
  1. Create up to 4 additional voices with the Wave Stereo Doubler.
  2. Subtly increase the quieter aspects of your vocal with a low level compressor.
  3. Create a concise reverb with quick reflections and a short reverb time.
Takedown request   |   View complete answer on sageaudio.com


Why do my vocals sound hollow?

It can also be caused by too much room sound in the track and that can be tough to fix. Recording in an untreated room can be bad and then if the sound was soft or away from the mic and you ran enough gain, that can make it even worse.
Takedown request   |   View complete answer on duc.avid.com


Why do microphones sound metallic?

It might be your headphones leaking into your microphone. The sound of your voice in the headphones is a tiny bit delayed from the acoustic sound of your voice, and the leakage from the headphones is likely mostly higher frequencies, and so the result is a sort of a robot effect on your voice.
Takedown request   |   View complete answer on sound.stackexchange.com


Why is mixing vocals so hard?

Mixing is hard because you have to train your ears to hear stuff you haven't previously heard. It's like learning an instrument. It takes patience and practice. And once you can hear all that stuff you still have to experiment a lot to have an opinion about it.
Takedown request   |   View complete answer on forum.cockos.com


How do you make your voice sound crispy?

To create crisp vocals, use a higher shelf, moderate saturation, then for your de-emphasis attenuate less than you originally amplified. This causes the saturators to work harder on high frequencies, resulting in a crisp sound and then balances out the spectrum so the effect isn't too aggressive.
Takedown request   |   View complete answer on sageaudio.com


How do I know what frequency my voice is?

Here's how you do it:
  1. Go to a piano or your guitar and find Middle C. We're talking about C4, the C in the middle of the keyboard and the C on the 1st fret of the B string on guitar. ...
  2. Mark the lowest note you can sing. ...
  3. Mark the highest note you can sing. ...
  4. Write out your vocal range.
Takedown request   |   View complete answer on ramseyvoice.com


What is a muddy bass sound?

Muddy bass frequencies are the frequencies which most sound systems will struggle to reproduce. This is usually in the 0-20 Hz range. If your speakers go down to 35Hz, but your track has information present below that, you'll end up with a messy, rumbly and viscous low-end.
Takedown request   |   View complete answer on whippedcreamsounds.com


What is boomy bass?

Actually, "boomy" in terms of bass quality means that the bass is distorted, muddy and "one-noted." And if you don't know what "one-noted" means, it means that all or most of the bass notes out of that bass-producing device sounds the same or nearly the same as each other.
Takedown request   |   View complete answer on hardforum.com


Does drinking tea help you sing better?

Alongside lemon and honey, these can help to soothe your vocal cords and could lead to improved singing performance. Tea can dehydrate you and lead to mood crashes, due to the caffeine content.
Takedown request   |   View complete answer on openmicuk.co.uk


How do you make your voice sound full?

Once you apply these ten techniques, your mixes as a whole will improve.
  1. Top-End Boost. ...
  2. Use a De'Esser. ...
  3. Remove Resonances. ...
  4. Control the Dynamics with Automation. ...
  5. Catch the Peaks with a Limiter. ...
  6. Use Multiband Compression. ...
  7. Enhance the Highs with Saturation. ...
  8. Use Delays Instead of Reverb.
Takedown request   |   View complete answer on tunecore.com


Does your voice change as you age?

The most common cause of a voice change later in life is aging of the voice box and the respiratory system that powers the voice. Aging may bring a loss of flexibility. The joints of the larynx may become stiff, and its cartilage may calcify.
Takedown request   |   View complete answer on health.clevelandclinic.org


Can we change your voice naturally?

The sound of your voice is determined by the size of your vocal cords and other physiological factors. While it's not possible to completely alter your voice from high to low or vice versa, there are techniques you can try to make slight changes to your pitch and volume and bring out the best in your natural voice.
Takedown request   |   View complete answer on wikihow.com
Next question
Is a karambit illegal?