What is a surface acre of water?

1 acre = 43,560 square feet. 1 acre-foot = 1 surface acre 1 foot deep, or 43,560 cubic feet. Total volume in acre-feet = surface area (acres) x average depth (feet) 1 part per million (ppm) of herbicide = 2.7 pounds per acre-foot of water.

How do you calculate surface acres of water?

Multiply the length times the width to get the square feet of surface area. This value can be converted to acres by dividing by 43,560 ft2/acre. So, a pond that measures 150 feet long and 100 feet wide would have an area = 150 feet X 100 feet = 15,000 ft2 or 0.34 acres.

How large is a surface acre?

acre, unit of land measurement in the British Imperial and United States Customary systems, equal to 43,560 square feet, or 4,840 square yards. One acre is equivalent to 0.4047 hectare (4,047 square metres).

What is an acre of water?

An acre foot of water equals about 326,000 gallons, or enough water to cover an acre of land 1-foot deep. To put it another way, an acre foot of water is enough to flood a football field 1-foot deep (a football field is roughly an acre in size).

How much is a surface acre?

Larger bodies of water typically use "acres" as the unit of measure for surface area. One acre is 43,560 square feet.

Form 1 | Science | Surface Water and Underground Water

How much water is in a 1 acre pond?

There are 43,560 square feet in one acre of water that is1 foot deep. It is equal to 325,851 gallons. For a square pond, one acre is approximately 208 feet x 208 feet.

How many gallons is a 1/2 acre pond?

Figure the cubic feet by multiplying the depth by the square footage for ½ acre (I get about 87,000 cu ft) and then convert to gallons by multiplying by 7.5 (I get 652,500 gallons).

What does 1 acre-foot of water mean?

One acre-foot is the. amount of water it. would take to flood. one acre to a depth of. one foot.

How many acres is an acre-foot of water?

One acre-foot equals about 326,000 gallons, or enough water to cover an acre of land, about the size of a football field, one foot deep.

How many acre-feet are in a share of water?

The amount of water required to cover one acre to a depth of one foot. This is equivalent to 43,560 cubic feet or 325,851 gallons. acres have more than one water source.

How do you visualize 1 acre?

The simplest way to visualize an acre is as a square. In other words, the piece of land has the same length and width. Knowing that an acre has 43,560 square feet, that would mean that the land is approximately 208 feet long by 208 feet wide. Thinking of it in those terms is much easier than tens of thousands!

How deep should a 1/2 acre pond be?

The main consideration when planning the depth of your fishing pond is what species of fish you plan on stocking. For warm water species like bass and panfish, an average depth of 8-10 feet is preferred in a ½ acre pond. Larger ponds can go deeper, of course.

How deep is a real pond?

The average size of most ponds is 10′ x 15′ (roughly 150 square feet) with the deepest point being 24″. If you have underwater shelves for plants they usually go 12″ down.

How deep should a 1/4 acre pond be?

Great for pond owners that want to add beauty to their pond while restoring water quality. Recommended for shallow ponds up to 1/4 acre with a minimum depth of 14-inches.

What does 3 acre-feet of water rights mean?

This is the length of the irrigation season. The other restriction is that no more than three acre-feet of water (977,550 gallons) may be applied to each acre for irrigation purposes during the irrigation season. (Note that the amount of water delivered to a landowner is usually less than the amount of the water right.

How many gallons does it take to irrigate 1 acre?

It takes 27,154 gallons of water to irrigate one acre of land with an inch of water. This measurement is useful when you need to water one or more acres and need to evaluate whether your current flow rate is adequate for getting it done according to your schedule.

What does an acre-foot look like?

As the name suggests, an acre-foot is defined as the volume of one acre of surface area to a depth of one foot. Since an acre is defined as a chain by a furlong (i.e. 66 ft × 660 ft or 20.12 m × 201.17 m), an acre-foot is 43,560 cubic feet (1,233.5 m³).

How is acre measured?

1 acre (both variants) is equal to the following customary units: 66 feet × 660 feet (43,560 square feet) 10 square chains (1 chain = 66 feet = 22 yards = 4 rods = 100 links) 1 acre is approximately 208.71 feet × 208.71 feet (a square)

How many acres is 200 feet 200 feet?

So 200 by 200 square feet is equal to 0.92 acres approximately.

Is a football field 1 acre?

Basically if you can picture a football field, that's pretty close to an acre in size. Officially, it is 43,560 square feet, and a football field is 48,000 square feet. Our standard acre isn't the same worldwide.

How long does it take for a 1 acre pond to fill up?

If you're filling your pond using a household water tap, you're probably looking at a max flow rate of 2.2gpm, which is about 132 gallons per hour. At this rate, running 24 hours per day, it would take 17 months to fill your pond, not allowing for evaporation, storm events, or other factors.

How big is a 1000 gallon pond?

How big exactly is 1,000 gallons? Well, at three feet deep, a six foot by eight foot pond will yield 1077 gallons. But these are merely the minimum recommended requirements. Also, the more fish you have, the larger your pond should be.

How many gallons of water is in a 1/4 acre pond?

Note: A quarter acre pond, depending on the depth, will be about 325,000 gallons to 500,000 gallons.