What is a Stage 1 tune on a Harley?

The basic purpose of a Stage 1 Performance Upgrade to your motorcycle is to modify the air filter, exhaust system, and fuel metering system to run as efficiently as possible, allowing it to breathe freely and, as a result, increasing the available power.

What Is a Stage 2 tune on a Harley?

The Stage 2 Harley-Davidson® upgrade involves a cam change. We can provide a stage 2 torque kit that gives you a significant improvement when you're passing or accelerating by targeting lower RPM performance. Or, a stage 2 power kit upgrade increases your rev limit to 6400 RPM for increased mid-range horsepower.

How much horsepower does a Stage 1 add to a Harley Davidson?

Most Stage 1 type modifications are typically in the +10-15% power increase over stock. Stage 2: this is typically referred to an engine with a performance cam upgrade as well as the other components within a Stage 1 combination. A typical Stage 2 has generally +20-25% more HP than stock.

What is a Stage 1 modification to Harley Davidson?

A Stage 1 Upgrade allows bikes to move more air and more fuel. The kit includes an air filter that allows your bike to take in more air, a less restrictive exhaust and a tuner that increases the fuel that gets delivered.

Do you need a tune for Stage 1 Harley?

Harley Davidson got hit with a large fine for violating emission standards, so a dealer tune for stage 1 is barely noticeable for performance. If the bike is carbed, no telling what the previous owner did/had done to add fuel.

Harley Davidson STAGE 1 Explained

What does a Stage 1 kit include?

This kit is ideal for riders who want to ride the bike aggressively while downshifting to lower gears to keep the engine operating in the higher RPM range. The kit components include a Screamin' Eagle cam, adjustable pushrods, pushrod covers, O-rings, and a cam cover gasket.

What does Stage 3 Mean on a Harley-Davidson?

A Stage 3 Upgrade is ideal for riders who want the largest engine displacement and increased power throughout the entire RPM range, with up to a 35% increase in the mid-to-upper RPM range.

What is stage tuning?

What is stage tuning? A stage represents a set of upgrades fitted as a set. As you might expect, a stage is how far you've gone with tuning part of your car. Stage 2 represents a more tuned car than stage 1.

How much does a Stage 2 tune cost?

You can expect to spend around $200 to $500 on stage 1 modifications and $450 to $850 on stage 2 tunes. In addition to stage 1 mods, stage 2 includes induction kit mods to increase airflow.

What does a tuner do for a Harley?

The Pro Street Tuner plugs in to your bike's data port to make internal changes updating ECM calibration to match your upgraded parts. It allows for changes to cams, heads, intake and exhaust while maintaining closed-loop fuel control to help save fuel while cruising.

How much horsepower does a Stage 1 tune add?

A stage 1 tune is simply an ECU remap or chip tune. This is the most cost-effective way to modify any vehicle for performance. Turbo-diesel and turbo-petrol vehicles respond extremely well to stage 1 tuning and commonly see a 20 – 40% increase in bhp and torque.

What is a Stage 6 tune?

Stage6 Tuning is the tuning department of Stage6. Tuning parts from engine to transmission, intake to exhaust are constantly being redeveloped, tested and optimized in order to then bring these high-quality tuning components to the market and make them available to everyone.

Does tuning a Harley make a difference?

One reason air cleaner and exhaust changes make such a difference is that tuning changes are also made either with jetting and ignition or EFI calibrations. These changes also reduce fuel mileage. By tuning the bike to it's utmost efficiency, you get the most power while sacrificing the least fuel economy.

How long does it take to dyno tune a Harley?

All motorcycles are built differently so depending on your type of engine, it may take longer than another type of engine. We do not charge more than four hours of service labor for normally aspirated fuel-injected (two hours of service labor for normal carbureted) Harley-Davidson® motorcycles.

What is a dyno tune Harley?

A Dyno tune is a diagnostic tool used to simultaneously measure the rear-wheel horsepower, torque, speed and rpm of any motorcycle. The Service Technician will then adjust the fuel mixture and timing for optimum performance. To do this, we use our state of the art 250ix Powersports Chassis DynoJet.

What is Sportster stage1?

SPORTSTER 1200 Stage 1

Our stage "1" sportster kit gives your 1200 sportster the boost in performance it needs to make it really scream. Kit includes stage 1 high compression pistons, stage 1 performance cams, stage 1 high flow air filter, Screamin Eagle super tuner and dyno tuning.

Can you tune 2021 Harley-Davidson?

The Power Vision can tune any fuel injected Harley-Davidson® motorcycle with the 2021 Delphi ECM. The Power Vision Product Suite includes a full color touch screen flash device, built in AutoTune Basic Mode*, vehicle interface cable, and WinPV (Windows PC based tuning application).

How much does a Stage 3 kit cost?

These Screamin' Eagle Milwaukee-Eight Stage III kits will run you $1800 for either the 119ci or 122ci upgrades.

What is the Screaming Eagle package?

It is the perfect kit for riders that want to bike aggressively while also being able to downshift to lower gears and simultaneously keep the engine at a higher rpm range. The components of the kit include the O-rings, the adjustable pushrods and their covers, a Screaming' Eagle SE8-462 cam, and a cam cover gasket.