What is a SecuriLock key?

SecuriLock is an engine immobilization system. It helps to prevent anyone from starting the engine without using a coded key programmed to your vehicle. Using the wrong key could prevent the engine from starting.
Takedown request   |   View complete answer on ford.com


What are two types of keys used for passive anti-theft system?

Only use integrated keyhead transmitters or standard SecuriLock keys. You must have two previously programmed coded keys and the new unprogrammed key readily accessible. Contact an authorized dealer to have the spare key programmed if two previously programmed coded keys are not available.
Takedown request   |   View complete answer on fordservicecontent.com


How do I reset my Ford SecuriLock?

If you have your key and can enter your vehicle, then you can start the process of resetting your anti-theft system and alarm by: Placing the key into the ignition. Turning the key from the “off” position to the “run” position eight times, quickly, within 10 seconds.
Takedown request   |   View complete answer on vehiclehistory.com


What is a Ford PATS key?

PATS is an acronym that stands for Passive Anti-Theft System (Ford also calls this SecuriLock). It is also called a transponder key.
Takedown request   |   View complete answer on blueovaltech.com


How do you turn off SecuriLock?

How do I disable Ford Securilock? Enter your vehicle with your ignition key and remote and insert your key into the ignition. Turn the ignition key from “Off” to “Run” eight times in the first 10 seconds, and end the eighth turn in the “Run” position.
Takedown request   |   View complete answer on answers-to-all.com


What is a Security Key?



What is Ford SecuriLock?

SecuriLock is an engine immobilization system. It helps to prevent anyone from starting the engine without using a coded key programmed to your vehicle. Using the wrong key could prevent the engine from starting.
Takedown request   |   View complete answer on ford.com


What triggers the anti-theft system in car?

The Anti-theft alarm system works with the help of sensors installed in and around the vehicle. An impact or the movements inside the car activates the sensors. It, in turn, triggers the alarm system and sounds the alarm. Finally, the alarm goes off and alerts the owner/people.
Takedown request   |   View complete answer on carbiketech.com


What triggers Ford anti-theft system?

The system should be triggered if a door, the trunk or even the car's hood is opened without the key or the remote being used. The system should be triggered if the ignition switch is turned to the ON position without using a programmed key.
Takedown request   |   View complete answer on yourmechanic.com


How do I bypass Ford anti-theft system?

Key
  1. Insert the key into the driver's side door lock.
  2. Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds. ...
  3. Do this again, but turn the key in the opposite direction.
  4. Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
Takedown request   |   View complete answer on auffenbergfordnorth.com


How do I get my car out of anti-theft mode?

Look for a button that allows you to slide the physical key out of the fob. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in this position. This will signal to your car's system that you have the right key, and will enable you to bypass your car's alarm system.
Takedown request   |   View complete answer on popalock.com


How do I know if my car has a passive anti-theft device?

In insurance terms, this is any feature preinstalled in your car that makes it harder to steal, or easier to track or recover. We suggest you check your car's manual or the manufacturer's site to find out what security features might be installed.
Takedown request   |   View complete answer on help.hiroad.com


What is the difference between active and passive anti-theft?

Passive devices automatically arm themselves when the vehicle is turned off, the ignition key removed, or a door is shut. No additional action is required. Active devices require some independent physical action before they are set, such as pushing a button, or placing a “lock” over a vehicle component part.
Takedown request   |   View complete answer on progressive.com


How do you tell if a Ford key has a chip?

Key Identification

Transponder keys also have a chip in the head of the key. Typically they have a plastic head and are larger than the mechanical key. For example, here is a picture of a Ford H75 mechanical key blank and the H74-PT transponder key blank.
Takedown request   |   View complete answer on locksmitheugeneoregon.com


How do you program a Ford key without the original?

Steps to Program Transponder Key Without an Original
  1. Turn on Ignition. Sit in the driver's seat and put the key in the ignition. ...
  2. Wait. The security light must remain on for 15 minutes. ...
  3. Switch Off and On. Once you've waited 15 minutes, the security light should go off. ...
  4. Repeat Steps.
Takedown request   |   View complete answer on mechanicbase.com


How much does it cost to program a Ford key?

Transponder key programming starts at $50 - $75. This includes keys for GM, Ford, Dodge, Honda, Toyota, Nissan. Remote or fob programming starts at $65.
Takedown request   |   View complete answer on keylessshop.com


How do you test a Ford PATS key?

Insert the blank key in the ignition lock.
  1. Detect the module that contains PATS. It is easy: go to Service tab and look what module contains PATS programming function. Depending on the vehicle, it may be PCM, PATS, IC, HEC etc. ...
  2. Read DTC. For newer vehicles with CAN bus ((Focus Mk2...) ...
  3. Analyze returned DTC codes:
Takedown request   |   View complete answer on forscan.org


Do I need new keys for new PCM?

Re: Key programming with new PCM

In any version, it will likely need to be programmed to fit your model with the correct calibration and VIN recognition. The original keys can be reused providing PATS is operating and the PCM accepts programming.
Takedown request   |   View complete answer on forscan.org


Can anti-theft make your car not start?

If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.
Takedown request   |   View complete answer on aa1car.com


How can I start my car without a chip key?

It's not possible to start a car without the chip key. Try starting it with a mobile app, or call the on-road assistance service provided by your car's manufacturer. The only other options are to tow the vehicle home or to the nearest dealership, depending on how the new key is created.
Takedown request   |   View complete answer on vehiclefreak.com


What does it mean when the anti-theft light is blinking?

The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.
Takedown request   |   View complete answer on yourmechanic.com
Previous question
Are bananas uncountable?