What is a rear control arm?

For the rear of a vehicle with a solid axle, any style of control arms might be used to connect the rear axle to the frame or unibody. Most often, it is three or four control arms with rubber bushings on each end. These control arms are called "trailing arms" or "rear trailing arms".

Can you drive with a broken rear control arm?

How long can I drive with the damaged control arm? With the damaged or worn-out control arm, you can drive your vehicle for a week or less but it should be repaired as soon as you detect the problem through the methods given above before the suspension gets broken.

How much does it cost to replace a control arm?

If just a single control arm needs replacing, it will typically cost between $50 and $100. If the damage is to the whole system, you would need to purchase a control arm kit for around $100 to $250 .

What happens when a rear control arm breaks?

If your control arm breaks while driving, you may have trouble steering or going straight or a wheel could fall off your vehicle. It's certainly not ideal! The control arm is what connects your front wheels to your car. So if it breaks, it can easily lead to an accident.

How much does it cost to replace rear control arms?

On average, you can expect a car control arm replacement to cost between $500 and $750. Depending on your vehicle make and model—prices may also vary slightly depending on whether it is a front or rear control arm that needs replacing.

Control Arms vs Trailing Arms . . . What's the difference?

Is it worth replacing control arms?

The most common reason to replace a control arm is to improve wheel travel as part of a suspension lift. However, a new control arm can offer more than just increased ride height (lift) and additional wheel travel: Increased durability in the arm itself. A wider range of uniball/ball joint options.

What happens if you don't replace control arms?

Having damaged control arms and worn bushings or ball joints could cause suspension parts to become misaligned. When this occurs, you may experience issues with steering and handling. Usually you'll notice noises first, either while turning, stopping or driving over speed bumps.

Does control arm affect brakes?

Control arm bushings are not directly involved in the braking system, but any instability in the suspension and steering components can cause problems with braking. When braking suddenly, the front end of the car may continue to oscillate back and forth as the car slows.

How long does it take to replace a control arm?

However, control arm bushings need to be pressed in with a special tool or press, which takes some time and adds the labor cost. Is a control arm easy to replace at home? On the difficulty scale from 1 to 10, replacing a control arm is 7 or 8. In the shop, it takes about 1-1.5 hours to replace one control arm.

Can I drive with a bad control arm bushing?

Drive with bad control arm bushings is not safe. Because when the control arms or bushings are worn or broken, the steering becomes unpredictable and dangerous for you and other drivers. Even if you keep the steering wheel straight, your vehicle may be driving randomly to one side.

Are struts the same as control arms?

Strut type designs have a lower control arm but no upper control arm. In strut designs, the strut becomes the upper control arm and is sometimes connected directly to the spindle or the lower control arm.

How do you know if your car needs a control arm?

Can a control arm be repaired?

Control arm replacement can be expensive. Often, the bushings and ball joints must be replaced at the same time as well, although it depends on the level of damage & wear. All of these components work together. A control arm labor can take several hours to replace.

What causes control arm to break?

Control arms can bend or break when driving over large potholes or bumps, while bushings can also wear out on their own due to age. Over time, the wear from constant movements and New England potholes can also cause them to break.

How do I know if my rear control arm bushings are bad?

Bad trailing arm bushings may create an unusual clunking or thudding noise, especially when the vehicle is placed in drive or reverse. You may also observe these sounds when the vehicle is driving over bumps, accelerating, turning, or braking.

How many control arms are on a car?

Automotive vehicles usually have between two and four control arms, depending on the vehicle suspension. However, most modern cars only have control arms in the front wheel suspension. Larger or heavy-duty vehicles like trucks may have control arms in the rear axle.

Do you need alignment after replacing control arms?

Do you need an alignment after replacing the upper control arms? The need for calibration after lowering the car is not the same as replacing the upper arm. If you're just replacing your upper arm, you shouldn't worry about alignment unless your old arm is badly worn and has significant play.

Is control arm part of suspension?

The control arms are one of the core components of a suspension system and serve as the direct connection points between the front wheel assemblies and the vehicle's frame. The control arms allow a driver to steer a car while also guiding the wheels up and down with the road surface.

What happens when your control arm is bent?

Signs Of A Bent Control Arm

Vehicle pulling to the side. Tire sitting at and unusual angle. Accelerated wear on either edge of the tire. Loose steering.

How many miles do control arms last?

Q: How long do control arms usually last? It depends on how the vehicle is used but by and large, they can last for between 90,000 and 100,000 miles if the car is used right and there are no adverse situations like accidents or frequent entry into potholes.

Should you replace upper and lower control arms at the same time?

It is not necessary to replace both lower or both upper control arms if one is bad, but often they wear out at roughly the same mileage. If one control arm is bad and the other is on its way, it makes sense to replace both arms at once. This way, you only need to do the wheel alignment once.

How much does it cost to replace bushings in control arm?

How much do replacement control arm bushings cost? Most car owners can expect to pay about $300 to completely replace a single bushing. That means you can expect to pay around $1,200 to replace all four bushings simultaneously. Generally, parts cost between $100 to $200, while labor costs between $200 to $300.

How long can you drive on bad control arms?

If the control arm doesn't have interchangeable rubber bearings and ball joint, it's designed to last as long as its weakest part. The lifespan varies, but you can reasonably expect 50,000 – 80,000 miles out of it.

Can bad control arms cause vibration when braking?

If the bushings or ball joints in the control arm become excessively worn it can cause wheel shimmy, which may cause vibrations felt in the wheel.