What is a flapper piston toilet?

Toilets using gravity flush systems offer a powerful flush using less water. Gravity flush systems are one of the most commonly used flush systems and have been used over a century. With this type of flush system the flush valve or “flapper” opens up and allows water to rush down through the bowl.

What are the different types of toilet flappers?

There are three main types of toilet flappers: seat disk, tank ball, and rubber. Identifying what type of toilet flapper you have is as simple as removing the top of your toilet tank and taking a look.

What are flappers in a toilet?

The toilet flapper is the component inside your toilet tank that lets water flow out of the tank and into the bowl when you flush. This round, rubber disc is attached to the bottom of the overflow tube, usually by mounting arms that hook onto ears on either side of the overflow tube.

How do I know if my flapper is bad?

How often should a toilet flapper be replaced?

The average toilet flapper lasts about 4 to 5 years. It is important that you replace your toilet flapper when needed to prevent damaging leaks.

Toilet Flush Valves -- What's the Difference ???

How do I stop my new flapper from leaking?

Do all toilets have a flapper?

A majority of toilets will use the two inch flapper; however three inch flappers have become popular in recent years and can be found in newer toilets manufactured since 2005. An easy reference for determining your toilet's flapper size is to look at the flush valve drain opening at the bottom of your tank.

Which type of toilet flush is best?

Dual-Flush Toilets

The half flush is used for liquid waste, while we use the full flush for solid waste. One of the greatest benefits of a dual-flush toilet is water efficiency. Their price is higher, however, they are good for the environment and your budget.

Which toilet system is best?

What are the three types of toilet?

Do some toilets flush better than others?

Now there are high-efficiency (HET) and ultra-high-efficiency (UHET) toilets that use a mere 1.28 and 0.8 gpf, respectively. Yet, contrary to what you might expect, flushing efficacy has also gotten better; independent tests show that some UHETs can evacuate up to 800 grams (1.75 pounds) of solids with every flush.

Are dual flush toilets better?

Dual flush toilets are best for those looking for an eco-friendly and water saving plumbing option. By having both a full and half flush option (depending on the type of waste) the user can accurately allocate the right amount of water each flush, savings lots of money per month on water bills.

What do I need to know before buying a toilet?

Why does my toilet still leaks after replacing flapper?

If you've tried replacing the toilet flapper but the toilet still runs, the flush valve seat is probably rough or pitted. You can replace the entire flush toilet flapper valve, but it's a big job.

Can you change toilet flapper without turning off water?

It is a good idea to turn the water off to the toilet before replacing the flapper, though you can replace some styles in under a minute!

Why do toilet flappers start to leak?

A dirty flapper can cause a leak due to algae or other minerals not allowing the flapper to properly close. If the flapper is dried out, warped, cracked, or pitted, then you'll need to replace it. Check for cracks in the flush valve (the piece the toilet flapper seals against).

What is Ghost Flushing?

Ghost flushing, also known as phantom flushing, occurs when the toilet tank flapper is no longer creating a watertight seal with the flush valve, causing water to unnecessarily leak into the toilet bowl.

Why does flapper not seal?

Locate the small metal or plastic chain that attaches the flush handle lever to the flapper. Lift the chain to determine if it is free of tangles. Check if it is long enough to permit the flapper to seal properly on the flush valve seat, yet not so long that it catches under the flapper as it closes the valve.