What is a closet 90?

A closet bend is a 90-degree toilet elbow fitting, but it doesn't form a sharp angle. Instead, the closet bend has a gradual, sweeping corner that allows waste to flow through the bend without clogging.
Takedown request   |   View complete answer on homeguides.sfgate.com


What is a closet bend pipe?

A closet bend is the 90-degree angle pipe installed beneath your toilet in the bathroom. This is the most important and often challenging part of toilet plumbing, but if you know what to do, it is very manageable.
Takedown request   |   View complete answer on ehow.com


Can you use a 90 on toilet?

A toilet drain can have bends. It's recommended to avoid having a 90-degree bend as this will lead to blockages and unwanted damage. Instead, it's best to restrict the bend to 45-degrees and then place a straight pipe before adding another 45-degree bend.
Takedown request   |   View complete answer on dropbymyhouse.com


What kind of elbow do you use for a toilet?

If the toilet drain does not connect directly to a vent, you must find another way to vent it. If the drain line runs away from the wall where you want the vent, use a reducing Y and a 45-degree street elbow to point the vent line toward the wall. The horizontal vent pipe runs right next to the closet bend.
Takedown request   |   View complete answer on bhg.com


What is a closet in plumbing?

In plumbing, a closet flange (also known as a toilet flange) is a pipe fitting (specifically, a type of flange) that both mounts a toilet to the floor and connects the closet bend to a drain pipe. The name comes from the term "water closet", the traditional name for a toilet.
Takedown request   |   View complete answer on en.wikipedia.org


the best closet bend for toilets.(2020)



Why was it called water closet?

One common place to install a toilet was in a remodeled closet because of it's dedicated size and door. Since it was the one place in the home that had indoor water, it was called the “water closet.”
Takedown request   |   View complete answer on southendplumbingllc.com


What is a water closet 1800s?

Water closets date back to the 1800s.

Homes may still have had “bathrooms,” but these spaces were for bathing and didn't actually have a toilet. By 1890, it became more common to have toilets inside the home, in rooms known as water closets.
Takedown request   |   View complete answer on bobvila.com


How far can a toilet be from a vent stack?

According to the UPC, the distance between your trap and the vent should be no more than 6 feet. In other words, for the vent to work properly, it needs to feed into the drain line within 6 feet of the trapways that connect to it.
Takedown request   |   View complete answer on plumbersstock.com


Can a toilet drain drop straight down?

Vertical Drop

When the toilet drain reaches a vertical wall, it drops straight down between wall studs. Although this is a vertical drop, don't use standard 90-degree plumbing elbows, called "hard 90s," to connect the pipes. The sharp corners on these elbow fittings can increase the risk of clogs.
Takedown request   |   View complete answer on ehow.com


Does a toilet have to be vented?

“Does a toilet need a vent?” And the answer is yes, your toilet has to have a vent. For more information on the great importance of plumbing vents, read our plumbing vent article here. And the size of this vent pipe depends on your local plumbing code.
Takedown request   |   View complete answer on hammerpedia.com


Can you put a 90 in a sink drain?

It's fine to have a larger-radius (sweep) 90-degree bend at the base of a vertical drainage stack where the wastewater starts to travel horizontally. It's also a good idea to have a sweep 90-degree fitting where a drain pipe pops out of a wall for a kitchen, vanity or laundry sink.
Takedown request   |   View complete answer on washingtonpost.com


What angle should a toilet drain be?

The ideal slope of any drain line is ¼ inch per foot of pipe. In other words, for every foot the pipe travels horizontally, it should be dropping ¼ inch vertically.
Takedown request   |   View complete answer on mrplumberatlanta.com


Can you put a bend in a soil pipe?

Bends. Bends at the base of stacks should be of long radius. Two 45° bends may be used as an alternative.
Takedown request   |   View complete answer on marleyplumbinganddrainage.com


Can a toilet vent be upstream?

A toilet vent can be upstream. The purpose of the vent pipe is to allow the sewer's gases to escape from the house's roof rather than inside the house. A vent also allows oxygen to enter into the sewer pipes, which allows the waste to break down and prevents clogging.
Takedown request   |   View complete answer on whatblueprint.com


How do you offset a toilet?

To do that, the following steps illustrate how to install an offset toilet flange for this purpose:
  1. Remove the Existing Toilet. ...
  2. Remove the Old Wax Ring. ...
  3. Block the Waste Hole. ...
  4. Plan Your Fit. ...
  5. Out with the Old. ...
  6. Cut Out the Floor to Make Room. ...
  7. Test Your New Fit. ...
  8. Install the New Offset Toilet Flange.
Takedown request   |   View complete answer on protoolreviews.com


What chemical will unclog a toilet?

Pour 1 cup baking soda and 2 cups vinegar into the toilet.

The baking soda and vinegar create a chemical process that help to dissolve clogs. Distilled white vinegar is commonly used, but any type of vinegar will work. The mixture will fizz a great deal.
Takedown request   |   View complete answer on wikihow.com


What is the best product to unclog a toilet?

The 5 Best Drain Cleaners for Clogged Toilets
  1. Thrift T-600 Granular Drain Cleaner — Best Overall. Check Latest Price. ...
  2. RID-X Septic Tank Enzyme Treatment — Best Value. Check Latest Price. ...
  3. Bio-Clean Drain Septic Bacteria — Premium Choice. Check Latest Price. ...
  4. Green Gobbler Ultimate Drain Cleaner. ...
  5. Drano Max Gel Clog Remover.
Takedown request   |   View complete answer on housegrail.com


How far from a wall should a toilet drain be?

The Distance To Set The Toilet Flange From The Back Wall. You'll want to set the center of the water closet flange 12 inches from the finished back wall.
Takedown request   |   View complete answer on hammerpedia.com


Can a toilet and sink share a vent?

Wet venting is most common in conjunction with toilets and sinks; the drain for the sink is also the vent for the toilet. It can also be used for a variety of other applications but due to the following rules this is the most convenient and common situation to run into.
Takedown request   |   View complete answer on jaytechplumbing.com


Can a bath and toilet share the same drain?

Conclusion. In short, it is possible to connect the toilet drainage line and the shower drainage line, as long as they both have separate waste trap arms. However, do note that combining them may also lead to blockages, which can cause smells to come from certain drains.
Takedown request   |   View complete answer on victoriaplum.com


Can two toilets share the same vent?

Most houses have more than one toilet, and if they are on the same side of the house, their waste lines can usually tie into the same stack. If they are on opposite sides, however, each may need its own stack. Since the stacks must be vented, this would mean two vent openings on the roof.
Takedown request   |   View complete answer on homeguides.sfgate.com


What were bathrooms called in the 1900s?

Though toilets (aka water-closets) were invented earlier, dedicated rooms for personal hygiene and grooming were almost unheard of except for the very wealthy. In 1900, a bowl, pitcher, and chamber pot were standard issue in most bedrooms and kept in a small cabinet called a commode.
Takedown request   |   View complete answer on antiquehomestyle.com


What did a bathroom look like in 1910?

1910s: Sanitary Look

Known as the sanitary look, bathrooms also featured white porcelain toilets, bathtubs and basins. On the The Block, a 1910-inspired bathroom was created with a white basin on a white panel vanity, with subway tiles on the walls and lightly-grey floor tiles.
Takedown request   |   View complete answer on canningvale.com


What did Victorians call the toilet?

The bath and sink were commonly in one room, and the toilet in another (the lavatory or water closet).
Takedown request   |   View complete answer on vivaciousvictorian.com
Previous question
Is Kizaru scared of Benn Beckman?
Next question
Do all bathrooms have mold?