What is a 413 Dodge motor?

The 413 cu in (6.8 L) RB was used from 1959 to 1965 in cars. It was also used in medium and heavy trucks including truck-tractors such as the C-1000, up until 1979. It has a bore of 4.1875 inches.

What is a Mopar 413 engine?

The 413, a high-torque, medium-horsepower powerplant, went into the 1959-65 cars, and 1959-79 trucks. The engine was also sold to high-end European automakers, such as Facel Vega. See 413 dyno tests conducted at Chrysler in 1959. Chrysler car. Engine.

What is a Dodge 413?

In Dodge cars, this was called a Ram-Charger 413, and Plymouth called it a Super Stock 413. A 1962 Plymouth Savoy with a 413 Max Wedge known as the “Melrose Missile” became the first factory stock car to break into the 11 second range in July of 1962. The Missile ran a verified ¼-mile time of 11.93 seconds.

What is a 413 wedge motor?

First-year Max Wedge engines were 413 cubic inches and came in 410 and 420 horsepower versions. Dodge called its engine the "Ramcharger 413" while Plymouth called it the "Super Stock 413." In 1963, the engine's displacement increased to 426 cubic inches as the bore was increased from 4.19 to 4.25 inches.

What car has a 413 engine?

The 413-cid V-8 had been around since 1959, but not until '61 did it find its way out of big Chryslers and into smaller Dodges and Plymouths.

High Performance 413 Big Block Mopar Build

How do I identify a Chrysler 413?

The 413, 426 wedge and the 440 cubic inch engines are known as "RB" engines (raised block) The 426 cubic inch Hemi is in a class by itself. To locate your casting number, look on the side of your block and compare it to the chart below for engine Id, the date may also be stamped on the block by the casting numbers.

Is a 426 wedge a Hemi?

Max Wedge. The name just oozes performance. All the talk today is Hemi this, Hemi that, but before Chrysler unleashed the 426 Hemi on the street, there was another engine displacing 426 cubic inches.

How much horsepower does a 426 wedge have?

Power was rated at a maximum of 420 ponies with torque checking in at an incredible 500 lb-ft. The Max Wedge was introduced in 1962 in a number of mid-size models offered by Plymouth (the Super Stock 413) and Dodge (the Ramcharger 413).

Was there ever a 440 Hemi?

The rarest is the Hemi-powered Coronet 440 convertible (440 was the trim level not the engine). Only six were built.

What is a 440 Magnum engine?

We all know the 440 big-block is the largest displacement V-8 engine built by Chrysler, and when it comes to a combination of torque, power, and drivability, the 440 ranks as one of the best engines ever built.

What is Dodge big-block?

The Big-block Mopar crate engine goes by many names. You may know it as the 383, 400, or 440. Racers call it the "wedge" to distinguish it from the ever-popular Hemi. Chrysler experts alternately call it the B-series or RB-series, depending on whether it's a short-deck or tall-deck block (more on that later).

Is a Dodge 383 a big-block?

The 383 Chrysler B engine is known as the Mopar big block that nobody loves. Typically, gearheads favor its beefier big brother, the 440. The 383 B is characterized by its large cylinder bore of 4.25 inches with a short stroke of 3.375. (That is in comparison to the 440's 3.75.)

How much horsepower does a 1970 426 Hemi have?

MoPar 426 Hemi

The 426 street Hemi was rated at 425 horsepower from the factory. This Chrysler dyno sheet from decades ago and this close-to-stock dyno session of a new 426 Hemi both put the gross horsepower rating at about 470 horsepower without full exhausts and other engine-driven accessories.

How much horsepower did the 426 Hemi really have?

Auto Machine reveals the 426 Street Hemi's true power potential. The Land and Sea dyno reveals the Hemi's actual output: 494.4 hp at 5,950 rpm and 498.3 lb-ft at 4,500 rpm. At 5,000 rpm, where Chrysler claimed 425 hp, it makes 459.3 hp.

How much is a 426 Hemi worth?

Although the mighty Hemi has appeared in a few different displacements over its lifetime, it's the 426 variety that has made gearheads gasp for decades. Known officially as the Mopar Hellephant 426 Supercharged Hemi Crate Engine, it carries part number (P/N) P5160194 and wears a price tag of $29,995.

Can you put 426 Hemi heads on a 440?

Max agreed that the 426 heads will not fit the 440 block without necessary component upgrades, and a company called SVE (Stage V Engineering) makes the kit you will need. But Max emphasized that the layman answer is no, the Hemi heads will not fit a stock 440 block.

What V8 engines did Dodge make?

Dodge's Hemi was introduced in 1953 as the Red Ram. Dodge did not have a V8 engine until one was developed specifically for the line in 1953 based on the 1951 Chrysler hemi design, but downsized for these smaller cars.

How do I identify my Dodge engine?

Casting numbers for the small-block Mopar and big-block Mopar engine blocks can be found on the left (driver's) side of the block, and will consist of seven numerals. These numbers are different than the stamped eight-digit number found on the right side of the engine.

What is a Mopar small block LA?

The LA engines are a family of pushrod OHV small block 90° V-configured gasoline engines built by Chrysler Corporation. It was factory-installed in passenger vehicles, trucks and vans, commercial vehicles, marine and industrial applications from 1964 through 1991 (318) & 1992 (360).

Is a 383 and a 440 the same block?

The major difference between these two Mopar legends is the deck height of the block: 9.98-inch for the 383 and 10.725-inch for the 440.

What's the biggest engine Dodge makes?

THE HEART OF THE BEAST

The 2022 Dodge Challenger isn't one to be messed with. Thanks to its Supercharged 6.2L High-Output HEMI^® V8 engine, the SRT^® Super Stock has the highest horsepower of any production car and is the most powerful muscle car( Disclosure3).

What is the largest Chrysler engine?

Chrysler's Biggest Hemi: 10 Feet Long, 16 Cylinders, and 2220 Cubic Inches! A key step in the development of the famous Chrysler Hemi V8 was this monster: a 2500-horsepower aircraft engine designed for the U.S. armed forces in World War II.