What if my TV doesn't have an audio output?

If you have a cable or satellite set-top box or DVR you could also plug the audio output of that box directly into your home theater system. Again, the fiberoptic or coax digital connection is preferred, or you could use the HDMI output if your home theater system supports HDMI inputs with audio processing.

Does every TV have audio out?

My understanding why new tv's do not all have audio out may be due to the fact that the HDMI can have return audio; in other words the audio out is built into the HDMI board on the set. Not what someone wishes to hear when all they have is RCA audio connection on their stereo receiver.

How do I get audio output from my TV?

Do TVs have outputs?

That means you'll attach a cable to the output port on the device and connect that to the input port on the TV or converter device. However, TVs output audio to soundbars' inputs. The following are good for connecting most old devices to a new TV. The following are good for connecting most new devices to an old TV.

Can I connect speakers directly to my TV?

Can I Connect Speakers Directly to My TV? Generally, no. The only speakers that can connect directly to a television are active speakers with a built-in amplifier. For example, most soundbars are active, and so you can connect these directly to a TV via optical or HDMI ARC.

How to Connect Speakers to TV with No Audio Out

Why does my Samsung TV not have audio out?

Loose connections can cause dropouts, so make sure to reconnect the cable at both ends, and check if you still experience dropout. If you do, try using a new cable. If a different port on your TV is available, reconnect to it instead.

Is a headphone jack the same as audio out?

Audio carries the signal and will let the receiving end control amplifying the volume, vs. headphone jack will adjust it as it is going out. You will get a better sound quality out of the audio out.

Why does my LG TV have no audio output?

The issue is with the configuration of the external sound device, or the wiring connecting the two. Make sure the audio wire you're using is correctly and securely connected to both the TV's Audio-Out port and the sound device's Audio-In port. Try to use a different audio cable; your cable may have stopped working.

How do I know if my TV has optical audio output?

You can check if your devices support TOSLINK audio cabling by looking on the back of the device for the distinct TOSLINK port. The port is typically labeled “optical audio”, “TOSLINK”, “Digital Audio Out (Optical)” or something similar, but you certainly don't need a label to identify it.

Can I connect AUX to TV?

The auxiliary, or AUX input, is a common input channel for TVs. Video sources using cables connected to the AUX receptors, typically on the back or side of the TV, can be viewed by changing the TV to the AUX input, using the remote control.

What do you do if your TV doesn't have an optical port?

There are many ways to avoid using HDMI or optical connections. You can connect wirelessly with Bluetooth, or use a 3.5 mm AUX cable, RCA cables, or even an auxiliary device that converts coaxial cable to another kind of connection.

Do Smart TV have audio output?

Your TV has a variety of connections for audio input from devices such as Blu-Ray players and DVD players and for audio output to such as amplifiers.

How do I connect an audio jack to my Smart TV?

If your TV doesn't use RCA connectors for audio output, it may have a headphone out port (3.5mm port). You can use this to connect your TV to the speakers. They're the same connector used on phones, tablets, laptops, etc. For this, you'll need to use a 3.5mm audio jack on the TV end and a RCA jack on the speaker end.

Can you connect speakers to a TV without a receiver?

All you need to do is connect the AUDIO OUT to the TV's HDMI port. After that, use the amplifier's output connection to connect it to the speaker. If you think about it, the two-channel amplifier literally acts in the same way as a receiver, so there's not a lot of difference in terms of connection.

What does an audio jack look like?

A small round connector for accepting the pin-shaped plug from a standard pair of music headphones. Older phones used a smaller 2.5mm jack for phone headsets. Either size can support stereo sound and/or a microphone, depending on the number of separate connector rings on the plug or jack.

Can you use an aux cord in a headphone jack?

Although headphone jacks vary widely in size and wiring, the 3.5mm TRS and 3.5mm TRRS are the most common. A simple male-to-male 3.5mm TRS or TRRS “aux cable” will effectively connect most consumer audio devices to an aux input.

Is aux cable same as audio cable?

If you took them at face value, you would say yes, they are the same. But you probably didn't realize they are two different cables that share many similarities. Aux connectors look the same as headphones connectors sharing a 3.5mm (1/8”) TRS plug. The definition of an aux connector is a cable for universal audio.

Do Samsung TVs have audio outputs?

There is no doubt that Samsung smart televisions are among the best out there on the market. And while they boast great audio output, most of us would always want to make it even better, by perhaps connecting their Samsung smart TV to an external sound system such as a home theater.

Where is the digital audio output on a Samsung TV?

In Samsung TV‚ you can find the optical audio port in the back. You can use this port to transmit your TV's sound to an external device like a stereo or home theater.

How do I get audio on Samsung TV?

How do I connect my surround sound to my TV without HDMI?

You simply take one end of your digital optical cable and insert connect it to the digital optical output port on your TV. Then, you take the other end of the cable and insert it into the digital optical input port on the receiver connected to your surround sound speaker system.

How do I connect my analog speakers to my Smart TV?

Turn on the TV and go to the audio settings in the settings menu. Make sure the television is set to receive audio from the "Audio In" port you plugged the RCA cable into on the analog speakers. If connected correctly, you should notice the sound from the analog speakers syncing up with the picture on the TV.