What happens if you put 10/40 oil instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Will it hurt my car if I use 10w30 instead of 5w30?

Can I Mix 10w30 and 5w30? Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine.

Can I use 10W-40 oil instead of SAE 30 oil?

Ambient Temperature

This is the reason your location is so important in selecting which oil to use. Between a 10W-30 and 10W-40, 10W30 motor oil would run smoother in colder climates while a 10W40 would be more effective in preventing engine wear and tear in warmer temperatures.

Is 10w40 better than 5w30?

The 5w30 oil will flow better at low temperatures than the 10w40 oil. This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter.

Will thicker oil damage my engine?

Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.

The importance of choosing the right engine oil quality and viscosity for your car or truck - VOTD

Will 10w40 hurt a 5w30 engine?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Will using the wrong oil hurt my car?

You might notice a few oil spot in your garage or under your car because using the wrong oil can lead to leaks, or you might become aware of a burning smell while driving. If the oil isn't working as it should engine parts might not be lubricated well enough and cause friction, which can burn the oil.

Is 10W-40 too thick?

A low viscosity oil will move quicker through the engine to keep it lubricated and cool. Additionally, if your engine has a lower running temperature, 10W-40 motor oil might be too thick. Its higher viscosity at running temperature can reduce engine effectiveness as it'll need more energy to keep the engine operating.

What is 10W-40 oil used for?

Higher viscosity oil such as a 10W-40 can be useful for older engines burning or leaking oil. We offer Mobil™ 10W-40 high viscosity motor oils for use in vehicles with more than 75,000 miles, and a synthetic blend oil when cost is a consideration.

Does 10w40 hurt 10W30 engine?

If you were to put 10W40 in an engine designed for 10W30, the “thicker” oil would lead to friction in the engine and an increased load on the oil pump. The car would have to do more work to get the oil around the engine block.

Can I use 20w40 instead of 5w30?

Yes, you can!

What happens if you mix engine oil?

Mixing different types can destabilize your motor oil, reducing its efficiency and affecting your engine's performance. The smartest choice is to stick with the oil type and oil change intervals recommended by your car's manufacturer and visit your local car care experts for affordable services.

What if I use 10W instead of 5W?

There is a small benefit of using a 10W instead of a 5W oil in that the 10W will normally have less viscosity improvers in it. Viscosity improvers help the oil behave "thicker" at higher temperatures, but they do not actually provide lubrication.

Can I use 10w40 instead of 10w30?

The short answer is yes. Because both oils are formulated to give the same performance, it will be safe for you to use either oil. Some differences between the two oils include viscosity and base oil.

Can I use 10w30 instead of 5w30 Reddit?

It will be fine.

Is 10W-40 fully synthetic?

Semi-synthetic oils such as 10W40 have long been the standard. Their base is refined crude oil, which is then blended with additives.

Is 10w40 good for high mileage?

Designed for high mileage vehicles

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils^†), including: Cars. Trucks.

Is 10W-40 oil OK for petrol engine?

Redex 10W-40 Part Synthetic Oil is a high-quality engine oil suitable for both petrol and diesel vehicles, including those with fuel-injected, multi-valved and turbo-charged engines.

Can you mix engine oil grades?

Can oils of different grades be mixed? The good news is that mixing different types of oil it will not harm your engine in any way in the short run. Most synthetic and semi-synthetic engine oils are based on regular oil and are compatible.

Will thinner oil damage engine?

It's best to use the oil viscosity recommended in the owner's manual, but using a slightly thinner or thicker oil (lighter or heavier viscosity) generally poses no long-term harm.

Can wrong oil cause misfire?

Can an oil change cause a misfire? No, an oil change will not cause a misfire, because it doesn't affect the combustion chamber. A misfire is most likely caused by worn valve guide seals and guides, but worn rings and cylinders can also allow oil to enter the combustion chamber which will cause a misfire.

Can wrong oil cause knocking?

A low oil level can cause engine knocking.

Can I use 040 oil instead of 5w30?

Yes, if your car manufacturer approves it. If not, you should only use the approved oil. 0W-40 and 5W-30 oils can be combined because 5W-30 is thicker oil than 0W-40, and the extra, lower viscosity will make the start-up oil flow easy and efficient.

Is 5W better than 10W?

A quick lesson in motor oil states that a regular engine needs oil that flows under the prevailing weather or running conditions. A 10W or 5W is the index for how easily the oil flows in winter (hence the W). A 10W oil thickens more than a 5W.