What happens if you don't stain a deck?

Your Deck Will Lose its Luster

Over time, the sun's rays will dull and fade the finish. When this happens, a fresh coat of stain can quickly restore your deck's beauty. If you decide to leave your deck alone instead, expect the loss of color and shine to progress until your deck takes on a gray-ish, green-ish hue.

Is it OK not to stain a deck?

Staining a deck will lead to less work in the future. One of the main reasons the professionals don't recommend staining wood decks is because of the amount of time and energy involved. Stains don't generally last more than a year. This means yearly cleaning, staining and, if necessary, sanding of your deck every year.

How long will a deck last if you don't stain it?

After 6 months, the wood will start to lose its color and will begin to fade. Ultimately it will fade to grey or silver.

Can you just seal a deck and not stain it?

A: It's really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added.

What happens to wood if you don't stain it?

Without stain, any type of paint or sealant, rainwater, dew or snow can easily penetrate the decking. The wood will then swell until it dries when it will shrink again. This pattern of swelling and shrinking can cause damage to the wood such as splits, checks, splinters, cracks, and other blemishes.

Ideal Conditions to Stain Your Deck

Do you have to stain a deck every year?

As a general rule, your deck should be stained every 2-3 years. This can change, however, if you are in an area of high-humidity or especially volatile weather. The signs to look for when determining if you need deck staining are: The stain color of the wood is wearing off.

Is it too late to seal my deck?

Usually, late summer and early fall are the best times for deck restoration and sealing. However, if your area experiences typically drier springtime weather or summertime temps that don't get too hot, you can likely schedule deck sealing anytime between early April and late October.

What happens if you don't seal stain?

Wood is dried-out and dull if you do not apply some sort of sealer. Staining and finishing are two very different things. By applying pigments, a stain is meant to darken or dye wood, but the wood is not preserved by staining.

How can I protect my deck without staining it?

The best preventative measure you can take to protect your wooden deck is to use wood sealant. Clear wood sealants are a great way to maintain the natural beauty and wood grain while still preventing damage from rot, mold, and other weathering.

What time of year should you stain a deck?

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry. Check the weather and find a time when it's not expected to rain for two days before and following the deck treatment.

Can you stain a deck after a year?

Typically, homeowners should restain horizontal surfaces such as decks every two to three years. Poor deck upkeep will decrease the time you have to enjoy the deck before restaining it, while good deck upkeep may give you another year or two before you need to restain the deck.

Can you stain an old deck without sanding?

You don't even have to sand unless you want or if it could really use one. The reason you want to clean the wood first is to remove any dirt, mold or mildew spores to make sure the stain has a clean surface to bond.

Do you need to stain a pressure treated deck?

Pressure-treated wood contains preservatives to prevent rot and insect damage, but it remains vulnerable to the sun, wind, moisture and dirt. Learning how to stain pressure treated wood can extend the life and improve the appearance of decks, fencing, picnic tables, retaining walls and other exterior wood projects.

What happens if you dont oil your deck?

What can Happen when Regular Deck Oiling isn't Performed? If regular oiling and maintenance is not performed on your deck, there can be some unpleasant consequences. In most circumstances, it's just a case of natural deterioration over time resulting in fading, warping and weakening of the timber.

Why don't you stain a new deck?

New wood is suggested to dry since it has a high moisture content. This reduces the stain's ability to penetrate. The wood will dry and turn gray from the exposure to the sun's ultraviolet rays. After 3-12 months you would need to apply a wood deck cleaner to remove the gray wood cells.

Is it OK to pressure wash a deck before staining?

Taking your time is key to power washing a deck successfully. Now that the wood has been cleaned and stripped of grime, you can sand it and apply your stain of choice. Power washing a deck before staining will allow the wood to absorb the stain better and deeper.

Can you just seal a deck?

Sealant, stain, and paint can all be applied to a deck for different degrees of protection. Sealants are primarily used to protect against moisture damage.

What temperature should you not stain a deck?

Avoid the Heat

If it's too hot, the stain may dry too quickly, potentially causing lap marks and uneven penetration. Avoid staining your deck if it's above 90 degrees Fahrenheit. To ensure this, either choose a cooler day or stain your deck in the morning before it gets too hot.

What happens if you dont wash your deck before staining it?

But don't just slap a coat of stain on in a hurry — you'll need to clean your deck before staining it. If you stain a deck without cleaning and prepping it first, the results will look blotchy, uneven, and, well, amateur. Any time you save skipping the cleaning stage, you'll spend twice over repairing the botched job.

Does staining wood make it waterproof?

We've all seen the damage water has on wood surfaces that have been left untreated. By applying stain, you're creating a waterproof barrier that repels water, thus protecting the wood surface.

Is staining the same as sealing?

Unlike sealers, stains penetrate into the wood. Like the name suggests, a wood stain contains pigments that physically change the wood's color. This gives the wood protection against harmful UV rays. Stains also have the same beneficial water-repelling qualities.

Do you always need to seal stained wood?

Apply Sealant as Needed

Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats.

Should I pressure wash my deck before I seal it?

Pressure washing is the best way to prepare your deck for sealing. After you've pressure washed your deck, you'll need to wait for it to completely dry. Sometimes, this can take as long as 48-hours. Once it's dry, you'll want to sand your deck lightly.

How do I know if my deck needs to be sealed?

A water test is the easiest way to ensure that the wood can absorb sealer or finish. Sprinkle water on the deck. If it soaks in immediately, you can seal the deck. If the water beads up or stands on the deck, you may need to wait to seal it.

Should the underside of a deck be sealed?

If you stain the underside of your deck you create a barrier to moisture; however, this can actually trap moisture into your boards and cause them to rot at an alarming rate. This is because when you stain the underside of your deck, water can still get in from the nail or screw heads on the surface.